uboot/drivers/gpio/tegra186_gpio_priv.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * Copyright (c) 2016, NVIDIA CORPORATION.
   4 */
   5
   6#ifndef _TEGRA186_GPIO_PRIV_H_
   7#define _TEGRA186_GPIO_PRIV_H_
   8
   9/*
  10 * For each GPIO, there are a set of registers than affect it, all packed
  11 * back-to-back.
  12 */
  13#define TEGRA186_GPIO_ENABLE_CONFIG                             0x00
  14#define TEGRA186_GPIO_ENABLE_CONFIG_ENABLE                      BIT(0)
  15#define TEGRA186_GPIO_ENABLE_CONFIG_OUT                         BIT(1)
  16#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SHIFT          2
  17#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK           3
  18#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_NONE           0
  19#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_LEVEL          1
  20#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE    2
  21#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE    3
  22#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL_HIGH_RISING   BIT(4)
  23#define TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE_ENABLE             BIT(5)
  24#define TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT_ENABLE            BIT(6)
  25#define TEGRA186_GPIO_ENABLE_CONFIG_TIMESTAMPING_ENABLE         BIT(7)
  26
  27#define TEGRA186_GPIO_DEBOUNCE_THRESHOLD                        0x04
  28
  29#define TEGRA186_GPIO_INPUT                                     0x08
  30
  31#define TEGRA186_GPIO_OUTPUT_CONTROL                            0x0c
  32#define TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED                    BIT(0)
  33
  34#define TEGRA186_GPIO_OUTPUT_VALUE                              0x10
  35#define TEGRA186_GPIO_OUTPUT_VALUE_HIGH                         1
  36
  37#define TEGRA186_GPIO_INTERRUPT_CLEAR                           0x14
  38
  39/*
  40 * 8 GPIOs are packed into a port. Their registers appear back-to-back in the
  41 * port's address space.
  42 */
  43#define TEGRA186_GPIO_PER_GPIO_STRIDE                           0x20
  44#define TEGRA186_GPIO_PER_GPIO_COUNT                            8
  45
  46/*
  47 * Per-port registers are packed immediately following all of a port's
  48 * per-GPIO registers.
  49 */
  50#define TEGRA186_GPIO_INTERRUPT_STATUS_G                        0x100
  51#define TEGRA186_GPIO_INTERRUPT_STATUS_G_STRIDE                 4
  52#define TEGRA186_GPIO_INTERRUPT_STATUS_G_COUNT                  8
  53
  54/*
  55 * The registers for multiple ports are packed together back-to-back to form
  56 * the overall controller.
  57 */
  58#define TEGRA186_GPIO_PER_PORT_STRIDE                           0x200
  59
  60#endif
  61