LXR uboot/include/configs/mx7dsabresd.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4 *
   5 * Configuration settings for the Freescale i.MX7D SABRESD board.
   6 */
   7
   8#ifndef __MX7D_SABRESD_CONFIG_H
   9#define __MX7D_SABRESD_CONFIG_H
  10
  11#include "mx7_common.h"
  12
  13#define PHYS_SDRAM_SIZE                 SZ_1G
  14
  15#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  16
  17/* Size of malloc() pool */
  18#define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  19
  20/* Network */
  21#define CONFIG_FEC_MXC
  22#define CONFIG_FEC_XCV_TYPE             RGMII
  23#define CONFIG_ETHPRIME                 "FEC"
  24#define CONFIG_FEC_MXC_PHYADDR          0
  25
  26#define CONFIG_PHY_BROADCOM
  27/* ENET1 */
  28#define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  29
  30/* MMC Config*/
  31#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  32
  33#undef CONFIG_BOOTM_NETBSD
  34#undef CONFIG_BOOTM_PLAN9
  35#undef CONFIG_BOOTM_RTEMS
  36
  37/* I2C configs */
  38#define CONFIG_SYS_I2C_MXC
  39#define CONFIG_SYS_I2C_SPEED            100000
  40
  41#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  42#define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  43
  44#ifdef CONFIG_IMX_BOOTAUX
  45/* Set to QSPI1 A flash at default */
  46#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  47
  48#define UPDATE_M4_ENV \
  49        "m4image=m4_qspi.bin\0" \
  50        "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  51        "update_m4_from_sd=" \
  52                "if sf probe 0:0; then " \
  53                        "if run loadm4image; then " \
  54                                "setexpr fw_sz ${filesize} + 0xffff; " \
  55                                "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  56                                "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  57                                "sf erase 0x0 ${fw_sz}; " \
  58                                "sf write ${loadaddr} 0x0 ${filesize}; " \
  59                        "fi; " \
  60                "fi\0" \
  61        "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  62#else
  63#define UPDATE_M4_ENV ""
  64#endif
  65
  66#define CONFIG_MFG_ENV_SETTINGS \
  67        "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  68                "rdinit=/linuxrc " \
  69                "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  70                "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  71                "g_mass_storage.iSerialNumber=\"\" "\
  72                "clk_ignore_unused "\
  73                "\0" \
  74        "initrd_addr=0x83800000\0" \
  75        "initrd_high=0xffffffff\0" \
  76        "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  77
  78#define CONFIG_DFU_ENV_SETTINGS \
  79        "dfu_alt_info=image raw 0 0x800000;"\
  80                "u-boot raw 0 0x4000;"\
  81                "bootimg part 0 1;"\
  82                "rootfs part 0 2\0" \
  83
  84#define CONFIG_EXTRA_ENV_SETTINGS \
  85        UPDATE_M4_ENV \
  86        CONFIG_MFG_ENV_SETTINGS \
  87        CONFIG_DFU_ENV_SETTINGS \
  88        "script=boot.scr\0" \
  89        "image=zImage\0" \
  90        "console=ttymxc0\0" \
  91        "fdt_high=0xffffffff\0" \
  92        "initrd_high=0xffffffff\0" \
  93        "fdt_file=imx7d-sdb.dtb\0" \
  94        "fdt_addr=0x83000000\0" \
  95        "boot_fdt=try\0" \
  96        "ip_dyn=yes\0" \
  97        "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  98        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  99        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 100        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 101        "mmcautodetect=yes\0" \
 102        "mmcargs=setenv bootargs console=${console},${baudrate} " \
 103                "root=${mmcroot}\0" \
 104        "loadbootscript=" \
 105                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 106        "bootscript=echo Running bootscript from mmc ...; " \
 107                "source\0" \
 108        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 109        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 110        "mmcboot=echo Booting from mmc ...; " \
 111                "run mmcargs; " \
 112                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 113                        "if run loadfdt; then " \
 114                                "bootz ${loadaddr} - ${fdt_addr}; " \
 115                        "else " \
 116                                "if test ${boot_fdt} = try; then " \
 117                                        "bootz; " \
 118                                "else " \
 119                                        "echo WARN: Cannot load the DT; " \
 120                                "fi; " \
 121                        "fi; " \
 122                "else " \
 123                        "bootz; " \
 124                "fi;\0" \
 125        "netargs=setenv bootargs console=${console},${baudrate} " \
 126                "root=/dev/nfs " \
 127        "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 128                "netboot=echo Booting from net ...; " \
 129                "run netargs; " \
 130                "if test ${ip_dyn} = yes; then " \
 131                        "setenv get_cmd dhcp; " \
 132                "else " \
 133                        "setenv get_cmd tftp; " \
 134                "fi; " \
 135                "${get_cmd} ${image}; " \
 136                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 137                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 138                                "bootz ${loadaddr} - ${fdt_addr}; " \
 139                        "else " \
 140                                "if test ${boot_fdt} = try; then " \
 141                                        "bootz; " \
 142                                "else " \
 143                                        "echo WARN: Cannot load the DT; " \
 144                                "fi; " \
 145                        "fi; " \
 146                "else " \
 147                        "bootz; " \
 148                "fi;\0"
 149
 150#define CONFIG_BOOTCOMMAND \
 151           "mmc dev ${mmcdev};" \
 152           "mmc dev ${mmcdev}; if mmc rescan; then " \
 153                   "if run loadbootscript; then " \
 154                           "run bootscript; " \
 155                   "else " \
 156                           "if run loadimage; then " \
 157                                   "run mmcboot; " \
 158                           "else run netboot; " \
 159                           "fi; " \
 160                   "fi; " \
 161           "else run netboot; fi"
 162
 163#define CONFIG_SYS_MEMTEST_START        0x80000000
 164#define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 165
 166#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 167#define CONFIG_SYS_HZ                   1000
 168
 169/* Physical Memory Map */
 170#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 171
 172#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 173#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 174#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 175
 176#define CONFIG_SYS_INIT_SP_OFFSET \
 177        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 178#define CONFIG_SYS_INIT_SP_ADDR \
 179        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 180
 181/* environment organization */
 182#define CONFIG_ENV_SIZE                 SZ_8K
 183
 184/*
 185 * If want to use nand, define CONFIG_NAND_MXS and rework board
 186 * to support nand, since emmc has pin conflicts with nand
 187 */
 188#ifdef CONFIG_NAND_MXS
 189/* NAND stuff */
 190#define CONFIG_SYS_MAX_NAND_DEVICE      1
 191#define CONFIG_SYS_NAND_BASE            0x40000000
 192#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 193#define CONFIG_SYS_NAND_ONFI_DETECTION
 194
 195/* DMA stuff, needed for GPMI/MXS NAND support */
 196#endif
 197
 198#define CONFIG_ENV_OFFSET               (12 * SZ_64K)
 199#ifdef CONFIG_NAND_MXS
 200#define CONFIG_SYS_FSL_USDHC_NUM        1
 201#else
 202#define CONFIG_SYS_FSL_USDHC_NUM        2
 203#endif
 204
 205#define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 206#define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 207#define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 208
 209/* USB Configs */
 210#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 211
 212#define CONFIG_IMX_THERMAL
 213
 214#define CONFIG_USBD_HS
 215
 216#ifdef CONFIG_VIDEO
 217#define CONFIG_VIDEO_MXS
 218#define CONFIG_VIDEO_LOGO
 219#define CONFIG_SPLASH_SCREEN
 220#define CONFIG_SPLASH_SCREEN_ALIGN
 221#define CONFIG_BMP_16BPP
 222#define CONFIG_VIDEO_BMP_RLE8
 223#define CONFIG_VIDEO_BMP_LOGO
 224#endif
 225
 226#ifdef CONFIG_FSL_QSPI
 227#define CONFIG_SYS_FSL_QSPI_AHB
 228#define CONFIG_SF_DEFAULT_BUS           0
 229#define CONFIG_SF_DEFAULT_CS            0
 230#define CONFIG_SF_DEFAULT_SPEED         40000000
 231#define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 232#define FSL_QSPI_FLASH_NUM              1
 233#define FSL_QSPI_FLASH_SIZE             SZ_64M
 234#define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 235#define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 236#endif
 237
 238#endif  /* __CONFIG_H */
 239