// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
 * Author: Eric Gao <eric.gao@rock-chips.com>
 */

#include <common.h>
#include <clk.h>
#include <display.h>
#include <dm.h>
#include <fdtdec.h>
#include <panel.h>
#include <regmap.h>
#include "rk_mipi.h"
#include <syscon.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm/uclass-internal.h>
#include <linux/kernel.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru_rk3288.h>
#include <asm/arch-rockchip/grf_rk3288.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/rockchip_mipi_dsi.h>

#define MHz 1000000

/* Select mipi dsi source, big or little vop */
static int rk_mipi_dsi_source_select(struct udevice *dev)
{
        struct rk_mipi_priv *priv = dev_get_priv(dev);
        struct rk3288_grf *grf = priv->grf;
        struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);

        /* Select the video source */
        switch (disp_uc_plat->source_id) {
        case VOP_B:
                rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK,
                             RK3288_DSI0_LCDC_SEL_BIG
                             << RK3288_DSI0_LCDC_SEL_SHIFT);
                break;
        case VOP_L:
                rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK,
                             RK3288_DSI0_LCDC_SEL_LIT
                             << RK3288_DSI0_LCDC_SEL_SHIFT);
                break;
        default:
                debug("%s: Invalid VOP id\n", __func__);
                return -EINVAL;
        }

        return 0;
}

/* Setup mipi dphy working mode */
static void rk_mipi_dphy_mode_set(struct udevice *dev)
{
        struct rk_mipi_priv *priv = dev_get_priv(dev);
        struct rk3288_grf *grf = priv->grf;
        int val;

        /* Set Controller as TX mode */
        val = RK3288_DPHY_TX0_RXMODE_DIS << RK3288_DPHY_TX0_RXMODE_SHIFT;
        rk_clrsetreg(&grf->soc_con8, RK3288_DPHY_TX0_RXMODE_MASK, val);

        /* Exit tx stop mode */
        val |= RK3288_DPHY_TX0_TXSTOPMODE_EN
                        << RK3288_DPHY_TX0_TXSTOPMODE_SHIFT;
        rk_clrsetreg(&grf->soc_con8,
                     RK3288_DPHY_TX0_TXSTOPMODE_MASK, val);

        /* Disable turnequest */
        val |= RK3288_DPHY_TX0_TURNREQUEST_EN
                << RK3288_DPHY_TX0_TURNREQUEST_SHIFT;
        rk_clrsetreg(&grf->soc_con8,
                     RK3288_DPHY_TX0_TURNREQUEST_MASK, val);
}

/*
 * This function is called by rk_display_init() using rk_mipi_dsi_enable() and
 * rk_mipi_phy_enable() to initialize mipi controller and dphy. If success,
 * enable backlight.
 */
static int rk_mipi_enable(struct udevice *dev, int panel_bpp,
                          const struct display_timing *timing)
{
        int ret;
        struct rk_mipi_priv *priv = dev_get_priv(dev);

        /* Fill the mipi controller parameter */
        priv->ref_clk = 24 * MHz;
        priv->sys_clk = priv->ref_clk;
        priv->pix_clk = timing->pixelclock.typ;
        priv->phy_clk = priv->pix_clk * 6;
        priv->txbyte_clk = priv->phy_clk / 8;
        priv->txesc_clk = 20 * MHz;

        /* Select vop port, big or little */
        rk_mipi_dsi_source_select(dev);

        /* Set mipi dphy work mode */
        rk_mipi_dphy_mode_set(dev);

        /* Config  and enable mipi dsi according to timing */
        ret = rk_mipi_dsi_enable(dev, timing);
        if (ret) {
                debug("%s: rk_mipi_dsi_enable() failed (err=%d)\n",
                      __func__, ret);
                return ret;
        }

        /* Config and enable mipi phy */
        ret = rk_mipi_phy_enable(dev);
        if (ret) {
                debug("%s: rk_mipi_phy_enable() failed (err=%d)\n",
                      __func__, ret);
                return ret;
        }

        /* Enable backlight */
        ret = panel_enable_backlight(priv->panel);
        if (ret) {
                debug("%s: panel_enable_backlight() failed (err=%d)\n",
                      __func__, ret);
                return ret;
        }

        return 0;
}

static int rk_mipi_ofdata_to_platdata(struct udevice *dev)
{
        struct rk_mipi_priv *priv = dev_get_priv(dev);

        priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
        if (IS_ERR_OR_NULL(priv->grf)) {
                debug("%s: Get syscon grf failed (ret=%p)\n",
                      __func__, priv->grf);
                return  -ENXIO;
        }
        priv->regs = dev_read_addr(dev);
        if (priv->regs == FDT_ADDR_T_NONE) {
                debug("%s: Get MIPI dsi address failed (ret=%lu)\n", __func__,
                      priv->regs);
                return  -ENXIO;
        }

        return 0;
}

/*
 * Probe function: check panel existence and readingit's timing. Then config
 * mipi dsi controller and enable it according to the timing parameter.
 */
static int rk_mipi_probe(struct udevice *dev)
{
        int ret;
        struct rk_mipi_priv *priv = dev_get_priv(dev);

        ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
                                           &priv->panel);
        if (ret) {
                debug("%s: Can not find panel (err=%d)\n", __func__, ret);
                return ret;
        }

        return 0;
}

static const struct dm_display_ops rk_mipi_dsi_ops = {
        .read_timing = rk_mipi_read_timing,
        .enable = rk_mipi_enable,
};

static const struct udevice_id rk_mipi_dsi_ids[] = {
        { .compatible = "rockchip,rk3288_mipi_dsi" },
        { }
};

U_BOOT_DRIVER(rk_mipi_dsi) = {
        .name   = "rk_mipi_dsi",
        .id     = UCLASS_DISPLAY,
        .of_match = rk_mipi_dsi_ids,
        .ofdata_to_platdata = rk_mipi_ofdata_to_platdata,
        .probe  = rk_mipi_probe,
        .ops    = &rk_mipi_dsi_ops,
        .priv_auto_alloc_size   = sizeof(struct rk_mipi_priv),
};