1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Video driver for Marvell Armada XP SoC 4 * 5 * Initialization of LCD interface and setup of SPLASH screen image 6 */ 7 8#include <common.h> 9#include <dm.h> 10#include <video.h> 11#include <linux/mbus.h> 12#include <asm/io.h> 13#include <asm/arch/cpu.h> 14#include <asm/arch/soc.h> 15 16#define MVEBU_LCD_WIN_CONTROL(w) (0xf000 + ((w) << 4)) 17#define MVEBU_LCD_WIN_BASE(w) (0xf004 + ((w) << 4)) 18#define MVEBU_LCD_WIN_REMAP(w) (0xf00c + ((w) << 4)) 19 20#define MVEBU_LCD_CFG_DMA_START_ADDR_0 0x00cc 21#define MVEBU_LCD_CFG_DMA_START_ADDR_1 0x00dc 22 23#define MVEBU_LCD_CFG_GRA_START_ADDR0 0x00f4 24#define MVEBU_LCD_CFG_GRA_START_ADDR1 0x00f8 25#define MVEBU_LCD_CFG_GRA_PITCH 0x00fc 26#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100 27#define MVEBU_LCD_SPU_GRA_HPXL_VLN 0x0104 28#define MVEBU_LCD_SPU_GZM_HPXL_VLN 0x0108 29#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN 0x010c 30#define MVEBU_LCD_SPU_HWC_HPXL_VLN 0x0110 31#define MVEBU_LCD_SPUT_V_H_TOTAL 0x0114 32#define MVEBU_LCD_SPU_V_H_ACTIVE 0x0118 33#define MVEBU_LCD_SPU_H_PORCH 0x011c 34#define MVEBU_LCD_SPU_V_PORCH 0x0120 35#define MVEBU_LCD_SPU_BLANKCOLOR 0x0124 36#define MVEBU_LCD_SPU_ALPHA_COLOR1 0x0128 37#define MVEBU_LCD_SPU_ALPHA_COLOR2 0x012c 38#define MVEBU_LCD_SPU_COLORKEY_Y 0x0130 39#define MVEBU_LCD_SPU_COLORKEY_U 0x0134 40#define MVEBU_LCD_SPU_COLORKEY_V 0x0138 41#define MVEBU_LCD_CFG_RDREG4F 0x013c 42#define MVEBU_LCD_SPU_SPI_RXDATA 0x0140 43#define MVEBU_LCD_SPU_ISA_RXDATA 0x0144 44#define MVEBU_LCD_SPU_DBG_ISA 0x0148 45 46#define MVEBU_LCD_SPU_HWC_RDDAT 0x0158 47#define MVEBU_LCD_SPU_GAMMA_RDDAT 0x015c 48#define MVEBU_LCD_SPU_PALETTE_RDDAT 0x0160 49#define MVEBU_LCD_SPU_IOPAD_IN 0x0178 50#define MVEBU_LCD_FRAME_COUNT 0x017c 51#define MVEBU_LCD_SPU_DMA_CTRL0 0x0190 52#define MVEBU_LCD_SPU_DMA_CTRL1 0x0194 53#define MVEBU_LCD_SPU_SRAM_CTRL 0x0198 54#define MVEBU_LCD_SPU_SRAM_WRDAT 0x019c 55#define MVEBU_LCD_SPU_SRAM_PARA0 0x01a0 56#define MVEBU_LCD_SPU_SRAM_PARA1 0x01a4 57#define MVEBU_LCD_CFG_SCLK_DIV 0x01a8 58#define MVEBU_LCD_SPU_CONTRAST 0x01ac 59#define MVEBU_LCD_SPU_SATURATION 0x01b0 60#define MVEBU_LCD_SPU_CBSH_HUE 0x01b4 61#define MVEBU_LCD_SPU_DUMB_CTRL 0x01b8 62#define MVEBU_LCD_SPU_IOPAD_CONTROL 0x01bc 63#define MVEBU_LCD_SPU_IRQ_ENA_2 0x01d8 64#define MVEBU_LCD_SPU_IRQ_ISR_2 0x01dc 65#define MVEBU_LCD_SPU_IRQ_ENA 0x01c0 66#define MVEBU_LCD_SPU_IRQ_ISR 0x01c4 67#define MVEBU_LCD_ADLL_CTRL 0x01c8 68#define MVEBU_LCD_CLK_DIS 0x01cc 69#define MVEBU_LCD_VGA_HVSYNC_DELAY 0x01d4 70#define MVEBU_LCD_CLK_CFG_0 0xf0a0 71#define MVEBU_LCD_CLK_CFG_1 0xf0a4 72#define MVEBU_LCD_LVDS_CLK_CFG 0xf0ac 73 74#define MVEBU_LVDS_PADS_REG (MVEBU_SYSTEM_REG_BASE + 0xf0) 75 76enum { 77 /* Maximum LCD size we support */ 78 LCD_MAX_WIDTH = 640, 79 LCD_MAX_HEIGHT = 480, 80 LCD_MAX_LOG2_BPP = VIDEO_BPP16, 81}; 82 83struct mvebu_lcd_info { 84 u32 fb_base; 85 int x_res; 86 int y_res; 87 int x_fp; 88 int y_fp; 89 int x_bp; 90 int y_bp; 91}; 92 93struct mvebu_video_priv { 94 uintptr_t regs; 95}; 96 97/* Setup Mbus Bridge Windows for LCD */ 98static void mvebu_lcd_conf_mbus_registers(uintptr_t regs) 99{ 100 const struct mbus_dram_target_info *dram; 101 int i; 102 103 dram = mvebu_mbus_dram_info(); 104 105 /* Disable windows, set size/base/remap to 0 */ 106 for (i = 0; i < 6; i++) { 107 writel(0, regs + MVEBU_LCD_WIN_CONTROL(i)); 108 writel(0, regs + MVEBU_LCD_WIN_BASE(i)); 109 writel(0, regs + MVEBU_LCD_WIN_REMAP(i)); 110 } 111 112 /* Write LCD bridge window registers */ 113 for (i = 0; i < dram->num_cs; i++) { 114 const struct mbus_dram_window *cs = dram->cs + i; 115 writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | 116 (dram->mbus_dram_target_id << 4) | 1, 117 regs + MVEBU_LCD_WIN_CONTROL(i)); 118 119 writel(cs->base & 0xffff0000, regs + MVEBU_LCD_WIN_BASE(i)); 120 } 121} 122 123/* Initialize LCD registers */ 124static void mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info, 125 uintptr_t regs) 126{ 127 /* Local variable for easier handling */ 128 int x = lcd_info->x_res; 129 int y = lcd_info->y_res; 130 u32 val; 131 132 /* Setup Mbus Bridge Windows */ 133 mvebu_lcd_conf_mbus_registers(regs); 134 135 /* 136 * Set LVDS Pads Control Register 137 * wr 0 182F0 FFE00000 138 */ 139 clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16); 140 141 /* 142 * Set the LCD_CFG_GRA_START_ADDR0/1 Registers 143 * This is supposed to point to the "physical" memory at memory 144 * end (currently 1GB-64MB but also may be 2GB-64MB). 145 * See also the Window 0 settings! 146 */ 147 writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR0); 148 writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR1); 149 150 /* 151 * Set the LCD_CFG_GRA_PITCH Register 152 * Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting) 153 * Bits 25-16: Backlight divider from 32kHz Clock 154 * (here 16=0x10 for 1kHz) 155 * Bits 15-00: Line Length in Bytes 156 * 240*2 (for RGB1555)=480=0x1E0 157 */ 158 writel(0x80100000 + 2 * x, regs + MVEBU_LCD_CFG_GRA_PITCH); 159 160 /* 161 * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register 162 * Bits 31-16: Vertical start of graphical overlay on screen 163 * Bits 15-00: Horizontal start of graphical overlay on screen 164 */ 165 writel(0x00000000, regs + MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN); 166 167 /* 168 * Set the LCD_SPU_GRA_HPXL_VLN Register 169 * Bits 31-16: Vertical size of graphical overlay 320=0x140 170 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 171 * Values before zooming 172 */ 173 writel((y << 16) | x, regs + MVEBU_LCD_SPU_GRA_HPXL_VLN); 174 175 /* 176 * Set the LCD_SPU_GZM_HPXL_VLN Register 177 * Bits 31-16: Vertical size of graphical overlay 320=0x140 178 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 179 * Values after zooming 180 */ 181 writel((y << 16) | x, regs + MVEBU_LCD_SPU_GZM_HPXL_VLN); 182 183 /* 184 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register 185 * Bits 31-16: Vertical position of HW Cursor 320=0x140 186 * Bits 15-00: Horizontal position of HW Cursor 240=0xF0 187 */ 188 writel((y << 16) | x, regs + MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN); 189 190 /* 191 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register 192 * Bits 31-16: Vertical size of HW Cursor 193 * Bits 15-00: Horizontal size of HW Cursor 194 */ 195 writel(0x00000000, regs + MVEBU_LCD_SPU_HWC_HPXL_VLN); 196 197 /* 198 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register 199 * Bits 31-16: Screen total vertical lines: 200 * VSYNC = 1 201 * Vertical Front Porch = 2 202 * Vertical Lines = 320 203 * Vertical Back Porch = 2 204 * SUM = 325 = 0x0145 205 * Bits 15-00: Screen total horizontal pixels: 206 * HSYNC = 1 207 * Horizontal Front Porch = 44 208 * Horizontal Lines = 240 209 * Horizontal Back Porch = 2 210 * SUM = 287 = 0x011F 211 * Note: For the display the backporch is between SYNC and 212 * the start of the pixels. 213 * This is not certain for the Marvell (!?) 214 */ 215 val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) | 216 (x + lcd_info->x_fp + lcd_info->x_bp + 1); 217 writel(val, regs + MVEBU_LCD_SPUT_V_H_TOTAL); 218 219 /* 220 * Set the LCD_SPU_V_H_ACTIVE Register 221 * Bits 31-16: Screen active vertical lines 320=0x140 222 * Bits 15-00: Screen active horizontakl pixels 240=0x00F0 223 */ 224 writel((y << 16) | x, regs + MVEBU_LCD_SPU_V_H_ACTIVE); 225 226 /* 227 * Set the LCD_SPU_H_PORCH Register 228 * Bits 31-16: Screen horizontal backporch 44=0x2c 229 * Bits 15-00: Screen horizontal frontporch 2=0x02 230 * Note: The terms "front" and "back" for the Marvell seem to be 231 * exactly opposite to the display. 232 */ 233 writel((lcd_info->x_fp << 16) | lcd_info->x_bp, 234 regs + MVEBU_LCD_SPU_H_PORCH); 235 236 /* 237 * Set the LCD_SPU_V_PORCH Register 238 * Bits 31-16: Screen vertical backporch 2=0x02 239 * Bits 15-00: Screen vertical frontporch 2=0x02 240 * Note: The terms "front" and "back" for the Marvell seem to be exactly 241 * opposite to the display. 242 */ 243 writel((lcd_info->y_fp << 16) | lcd_info->y_bp, 244 regs + MVEBU_LCD_SPU_V_PORCH); 245 246 /* 247 * Set the LCD_SPU_BLANKCOLOR Register 248 * This should be black = 0 249 * For tests this is magenta=00FF00FF 250 */ 251 writel(0x00FF00FF, regs + MVEBU_LCD_SPU_BLANKCOLOR); 252 253 /* 254 * Registers in the range of 0x0128 to 0x012C are colors for the cursor 255 * Registers in the range of 0x0130 to 0x0138 are colors for video 256 * color keying 257 */ 258 259 /* 260 * Set the LCD_SPU_RDREG4F Register 261 * Bits 31-12: Reservd 262 * Bit 11: SRAM Wait 263 * Bit 10: Smart display fast TX (must be 1) 264 * Bit 9: DMA Arbitration Video/Graphics overlay: 0=interleaved 265 * Bit 8: FIFO watermark for DMA: 0=disable 266 * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80 267 */ 268 writel(0x00000780, regs + MVEBU_LCD_CFG_RDREG4F); 269 270 /* 271 * Set the LCD_SPU_DMACTRL 0 Register 272 * Bit 31: Disable overlay blending 1=disable 273 * Bit 30: Gamma correction enable, 0=disable 274 * Bit 29: Video Contrast/Saturation/Hue Adjust enable, 0=disable 275 * Bit 28: Color palette enable, 0=disable 276 * Bit 27: DMA AXI Arbiter, 1=default 277 * Bit 26: HW Cursor 1-bit mode 278 * Bit 25: HW Cursor or 1- or 2-bit mode 279 * Bit 24: HW Cursor enabled, 0=disable 280 * Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555 281 * Bits 19-16: Video Memory Color Format: 0x1=RGB1555 282 * Bit 15: Memory Toggle between frame 0 and 1: 0=disable 283 * Bit 14: Graphics horizontal scaling enable: 0=disable 284 * Bit 13: Graphics test mode: 0=disable 285 * Bit 12: Graphics SWAP R and B: 0=disable 286 * Bit 11: Graphics SWAP U and V: 0=disable 287 * Bit 10: Graphics SWAP Y and U/V: 0=disable 288 * Bit 09: Graphic YUV to RGB Conversion: 0=disable 289 * Bit 08: Graphic Transfer: 1=enable 290 * Bit 07: Memory Toggle: 0=disable 291 * Bit 06: Video horizontal scaling enable: 0=disable 292 * Bit 05: Video test mode: 0=disable 293 * Bit 04: Video SWAP R and B: 0=disable 294 * Bit 03: Video SWAP U and V: 0=disable 295 * Bit 02: Video SWAP Y and U/V: 0=disable 296 * Bit 01: Video YUV to RGB Conversion: 0=disable 297 * Bit 00: Video Transfer: 0=disable 298 */ 299 writel(0x88111100, regs + MVEBU_LCD_SPU_DMA_CTRL0); 300 301 /* 302 * Set the LCD_SPU_DMA_CTRL1 Register 303 * Bit 31: Manual DMA Trigger = 0 304 * Bits 30-28: DMA Trigger Source: 0x2 VSYNC 305 * Bit 28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge 306 * Bits 26-24: Color Key Mode: 0=disable 307 * Bit 23: Fill low bits: 0=fill with zeroes 308 * Bit 22: Reserved 309 * Bit 21: Gated Clock: 0=disable 310 * Bit 20: Power Save enable: 0=disable 311 * Bits 19-18: Reserved 312 * Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha. 313 * Bits 15-08: Configure Alpha: 0x00. 314 * Bits 07-00: Reserved. 315 */ 316 writel(0x20010000, regs + MVEBU_LCD_SPU_DMA_CTRL1); 317 318 /* 319 * Set the LCD_SPU_SRAM_CTRL Register 320 * Reset to default = 0000C000 321 * Bits 15-14: SRAM control: init=0x3, Read=0, Write=2 322 * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb, 323 * 3=palette, 15=cursor 324 */ 325 writel(0x0000C000, regs + MVEBU_LCD_SPU_SRAM_CTRL); 326 327 /* 328 * LCD_SPU_SRAM_WRDAT register: 019C 329 * LCD_SPU_SRAM_PARA0 register: 01A0 330 * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings 331 */ 332 writel(0x00000000, regs + MVEBU_LCD_SPU_SRAM_PARA1); 333 334 335 /* Clock settings in the at 01A8 and in the range F0A0 see below */ 336 337 /* 338 * Set LCD_SPU_CONTRAST 339 * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0 340 * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0 341 */ 342 writel(0x00000000, regs + MVEBU_LCD_SPU_CONTRAST); 343 344 /* 345 * Set LCD_SPU_SATURATION 346 * Bits 31-16: Multiplier signed 4.12 fixed point value 347 * Bits 15-00: Saturation signed 4.12 fixed point value 348 */ 349 writel(0x10001000, regs + MVEBU_LCD_SPU_SATURATION); 350 351 /* 352 * Set LCD_SPU_HUE 353 * Bits 31-16: Sine signed 2.14 fixed point value 354 * Bits 15-00: Cosine signed 2.14 fixed point value 355 */ 356 writel(0x00000000, regs + MVEBU_LCD_SPU_CBSH_HUE); 357 358 /* 359 * Set LCD_SPU_DUMB_CTRL 360 * Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888 361 * Bits 27-12: Reserved 362 * Bit 11: LCD DMA Pipeline Enable: 1=Enable 363 * Bits 10-09: Reserved 364 * Bit 8: LCD GPIO pin (??) 365 * Bit 7: Reverse RGB 366 * Bit 6: Invert composite blank signal DE/EN (??) 367 * Bit 5: Invert composite sync signal 368 * Bit 4: Invert Pixel Valid Enable DE/EN (??) 369 * Bit 3: Invert VSYNC 370 * Bit 2: Invert HSYNC 371 * Bit 1: Invert Pixel Clock 372 * Bit 0: Enable LCD Panel: 1=Enable 373 * Question: Do we have to disable Smart and Dumb LCD 374 * and separately enable LVDS? 375 */ 376 writel(0x6000080F, regs + MVEBU_LCD_SPU_DUMB_CTRL); 377 378 /* 379 * Set LCD_SPU_IOPAD_CTRL 380 * Bits 31-20: Reserved 381 * Bits 19-18: Vertical Interpolation: 0=Disable 382 * Bits 17-16: Reserved 383 * Bit 15: Graphics Vertical Mirror enable: 0=disable 384 * Bit 14: Reserved 385 * Bit 13: Video Vertical Mirror enable: 0=disable 386 * Bit 12: Reserved 387 * Bit 11: Command Vertical Mirror enable: 0=disable 388 * Bit 10: Reserved 389 * Bits 09-08: YUV to RGB Color space conversion: 0 (Not used) 390 * Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary, 391 * 128 Bytes burst 392 * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ?? 393 */ 394 writel(0x000000C0, regs + MVEBU_LCD_SPU_IOPAD_CONTROL); 395 396 /* 397 * Set SUP_IRQ_ENA_2: Disable all interrupts 398 */ 399 writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA_2); 400 401 /* 402 * Set SUP_IRQ_ENA: Disable all interrupts. 403 */ 404 writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA); 405 406 /* 407 * Set up ADDL Control Register 408 * Bits 31-29: 0x0 = Fastest Delay Line (default) 409 * 0x3 = Slowest Delay Line (default) 410 * Bit 28: Calibration done status. 411 * Bit 27: Reserved 412 * Bit 26: Set Pixel Clock to ADDL output 413 * Bit 25: Reduce CAL Enable 414 * Bits 24-22: Manual calibration value. 415 * Bit 21: Manual calibration enable. 416 * Bit 20: Restart Auto Cal 417 * Bits 19-16: Calibration Threshold voltage, default= 0x2 418 * Bite 15-14: Reserved 419 * Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16 420 * Bit 10: Power Down ADDL module, default = 1! 421 * Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z 422 * Bit 07: Reset ADDL 423 * Bit 06: Invert ADLL Clock 424 * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay 425 * Note: ADLL is used for a VGA interface with DAC - not used here 426 */ 427 writel(0x00000000, regs + MVEBU_LCD_ADLL_CTRL); 428 429 /* 430 * Set the LCD_CLK_DIS Register: 431 * Bits 3 and 4 must be 1 432 */ 433 writel(0x00000018, regs + MVEBU_LCD_CLK_DIS); 434 435 /* 436 * Set the LCD_VGA_HSYNC/VSYNC Delay Register: 437 * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals 438 */ 439 writel(0x00000000, regs + MVEBU_LCD_VGA_HVSYNC_DELAY); 440 441 /* 442 * Clock registers 443 * See page 475 in the functional spec. 444 */ 445 446 /* Step 1 and 2: Disable the PLL */ 447 448 /* 449 * Disable PLL, see "LCD Clock Configuration 1 Register" below 450 */ 451 writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1); 452 453 /* 454 * Powerdown, see "LCD Clock Configuration 0 Register" below 455 */ 456 writel(0x94000174, regs + MVEBU_LCD_CLK_CFG_0); 457 458 /* 459 * Set the LCD_CFG_SCLK_DIV Register 460 * This is set fix to 0x40000001 for the LVDS output: 461 * Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0 462 * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001 463 * See page 475 in section 28.5. 464 */ 465 writel(0x80000001, regs + MVEBU_LCD_CFG_SCLK_DIV); 466 467 /* 468 * Set the LCD Clock Configuration 0 Register: 469 * Bit 31: Powerdown: 0=Power up 470 * Bits 30-29: Reserved 471 * Bits 28-26: PLL_KDIV: This encodes K 472 * K=16 => 0x5 473 * Bits 25-17: PLL_MDIV: This is M-1: 474 * M=1 => 0x0 475 * Bits 16-13: VCO band: 0x1 for 700-920MHz 476 * Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL! 477 * N=28=0x1C => 0x1B 478 * Bits 03-00: R1_CTRL (for N=28 => 0x4) 479 */ 480 writel(0x940021B4, regs + MVEBU_LCD_CLK_CFG_0); 481 482 /* 483 * Set the LCD Clock Configuration 1 Register: 484 * Bits 31-19: Reserved 485 * Bit 18: Select PLL: Core PLL, 1=Dedicated PPL 486 * Bit 17: Clock Output Enable: 0=disable, 1=enable 487 * Bit 16: Select RefClk: 0=RefClk (25MHz), 1=External 488 * Bit 15: Half-Div, Device Clock by DIV+0.5*Half-Dev 489 * Bits 14-13: Reserved 490 * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider 491 * M' for LVDS=7!] 492 */ 493 writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1); 494 495 /* 496 * Set the LVDS Clock Configuration Register: 497 * Bit 31: Clock Gating for the input clock to the LVDS 498 * Bit 30: LVDS Serializer enable: 1=Enabled 499 * Bits 29-11: Reserved 500 * Bit 11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7 501 * Bits 07-02: Reserved 502 * Bit 01: 24bbp Option: 0=Option_1,1=Option2 503 * Bit 00: 1=24bbp Panel: 0=18bpp Panel 504 * Note: Bits 0 and must be verified with the help of the 505 * Interface/display 506 */ 507 writel(0xC0000201, regs + MVEBU_LCD_LVDS_CLK_CFG); 508 509 /* 510 * Power up PLL (Clock Config 0) 511 */ 512 writel(0x140021B4, regs + MVEBU_LCD_CLK_CFG_0); 513 514 /* wait 10 ms */ 515 mdelay(10); 516 517 /* 518 * Enable PLL (Clock Config 1) 519 */ 520 writel(0x8FF60007, regs + MVEBU_LCD_CLK_CFG_1); 521} 522 523static int mvebu_video_probe(struct udevice *dev) 524{ 525 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 526 struct video_priv *uc_priv = dev_get_uclass_priv(dev); 527 struct mvebu_video_priv *priv = dev_get_priv(dev); 528 struct mvebu_lcd_info lcd_info; 529 struct display_timing timings; 530 u32 fb_start, fb_end; 531 int ret; 532 533 priv->regs = dev_read_addr(dev); 534 if (priv->regs == FDT_ADDR_T_NONE) { 535 dev_err(dev, "failed to get LCD address\n"); 536 return -ENXIO; 537 } 538 539 ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, &timings); 540 if (ret) { 541 dev_err(dev, "failed to get any display timings\n"); 542 return -EINVAL; 543 } 544 545 /* Use DT timing (resolution) in internal info struct */ 546 lcd_info.fb_base = plat->base; 547 lcd_info.x_res = timings.hactive.typ; 548 lcd_info.x_fp = timings.hfront_porch.typ; 549 lcd_info.x_bp = timings.hback_porch.typ; 550 lcd_info.y_res = timings.vactive.typ; 551 lcd_info.y_fp = timings.vfront_porch.typ; 552 lcd_info.y_bp = timings.vback_porch.typ; 553 554 /* Initialize the LCD controller */ 555 mvebu_lcd_register_init(&lcd_info, priv->regs); 556 557 /* Enable dcache for the frame buffer */ 558 fb_start = plat->base & ~(MMU_SECTION_SIZE - 1); 559 fb_end = plat->base + plat->size; 560 fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT); 561 mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start, 562 DCACHE_WRITEBACK); 563 video_set_flush_dcache(dev, true); 564 565 uc_priv->xsize = lcd_info.x_res; 566 uc_priv->ysize = lcd_info.y_res; 567 uc_priv->bpix = VIDEO_BPP16; /* Uses RGB555 format */ 568 569 return 0; 570} 571 572static int mvebu_video_bind(struct udevice *dev) 573{ 574 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); 575 576 plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT * 577 (1 << LCD_MAX_LOG2_BPP) / 8; 578 579 return 0; 580} 581 582static const struct udevice_id mvebu_video_ids[] = { 583 { .compatible = "marvell,armada-xp-lcd" }, 584 { } 585}; 586 587U_BOOT_DRIVER(mvebu_video) = { 588 .name = "mvebu_video", 589 .id = UCLASS_VIDEO, 590 .of_match = mvebu_video_ids, 591 .bind = mvebu_video_bind, 592 .probe = mvebu_video_probe, 593 .priv_auto_alloc_size = sizeof(struct mvebu_video_priv), 594}; 595