uboot/include/configs/ds109.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (C) Copyright 2011
   4 * Jason Cooper <u-boot@lakedaemon.net>
   5 *
   6 * Based on work by:
   7 * Marvell Semiconductor <www.marvell.com>
   8 * Written-by: Siddarth Gore <gores@marvell.com>
   9 */
  10
  11#ifndef _CONFIG_DS109_H
  12#define _CONFIG_DS109_H
  13
  14/* Provide the MACH_TYPE value that the vendor kernel requires. */
  15#define CONFIG_MACH_TYPE                527
  16
  17/*
  18 * High Level Configuration Options (easy to change)
  19 */
  20#define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21
  22/*
  23 * Commands configuration
  24 */
  25#define CONFIG_CMD_EXT2
  26
  27/*
  28 * mv-plug-common.h should be defined after CMD configs since it used them
  29 * to enable certain macros
  30 */
  31#include "mv-plug-common.h"
  32
  33/*
  34 *  Environment variables configurations
  35 */
  36#ifdef CONFIG_SPI_FLASH
  37#define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  38#endif
  39
  40/*
  41 * max 4k env size is enough, but in case of nand
  42 * it has to be rounded to sector size
  43 */
  44#define CONFIG_ENV_SIZE                 0x10000
  45#define CONFIG_ENV_ADDR                 0x3d0000
  46#define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
  47
  48/*
  49 * Default environment variables
  50 */
  51#define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  52        "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  53        "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  54        "bootm 0x6400000;"
  55
  56#define CONFIG_EXTRA_ENV_SETTINGS       \
  57        "x_bootcmd_ethernet=ping 192.168.1.2\0" \
  58        "x_bootcmd_usb=usb start\0"     \
  59        "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  60        "x_bootargs=console=ttyS0,115200\0"     \
  61        "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
  62        "ipaddr=192.168.1.5\0"
  63
  64/*
  65 * Ethernet Driver configuration
  66 */
  67#ifdef CONFIG_CMD_NET
  68#define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
  69#define CONFIG_PHY_BASE_ADR     8
  70#endif /* CONFIG_CMD_NET */
  71
  72/*
  73 * SATA Driver configuration
  74 */
  75#ifdef CONFIG_MVSATA_IDE
  76#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  77#endif /*CONFIG_MVSATA_IDE*/
  78
  79#endif /* _CONFIG_DS109_H */
  80