LXR uboot/include/configs/goflexhome.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
   4 *
   5 * Based on dockstar.h originally written by
   6 * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   7 *
   8 * Based on sheevaplug.h originally written by
   9 * Prafulla Wadaskar <prafulla@marvell.com>
  10 * (C) Copyright 2009
  11 * Marvell Semiconductor <www.marvell.com>
  12 */
  13
  14#ifndef _CONFIG_GOFLEXHOME_H
  15#define _CONFIG_GOFLEXHOME_H
  16
  17/*
  18 * High Level Configuration Options (easy to change)
  19 */
  20#define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  21#define CONFIG_KW88F6281        1       /* SOC Name */
  22#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  23
  24/*
  25 * Default GPIO configuration and LED status
  26 */
  27#define GOFLEXHOME_OE_LOW               (~(0))
  28#define GOFLEXHOME_OE_HIGH              (~(0))
  29#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
  30#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
  31
  32/* PHY related */
  33#define MV88E1116_LED_FCTRL_REG         10
  34#define MV88E1116_CPRSP_CR3_REG         21
  35#define MV88E1116_MAC_CTRL_REG          21
  36#define MV88E1116_PGADR_REG             22
  37#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  38#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  39
  40/*
  41 * Commands configuration
  42 */
  43
  44/*
  45 * mv-common.h should be defined after CMD configs since it used them
  46 * to enable certain macros
  47 */
  48#include "mv-common.h"
  49
  50/*
  51 *  Environment variables configurations
  52 */
  53#ifdef CONFIG_CMD_NAND
  54#define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  55#endif
  56/*
  57 * max 4k env size is enough, but in case of nand
  58 * it has to be rounded to sector size
  59 */
  60#define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  61#define CONFIG_ENV_ADDR                 0xC0000
  62#define CONFIG_ENV_OFFSET               0xC0000 /* env starts here */
  63
  64/*
  65 * Default environment variables
  66 */
  67#define CONFIG_BOOTCOMMAND \
  68        "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
  69        "ubi part root; " \
  70        "ubifsmount ubi:root; " \
  71        "ubifsload 0x800000 ${kernel}; " \
  72        "bootm 0x800000"
  73
  74#define CONFIG_EXTRA_ENV_SETTINGS \
  75        "console=console=ttyS0,115200\0" \
  76        "mtdids=nand0=orion_nand\0" \
  77        "mtdparts="CONFIG_MTDPARTS_DEFAULT \
  78        "kernel=/boot/uImage\0" \
  79        "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
  80
  81/*
  82 * Ethernet Driver configuration
  83 */
  84#ifdef CONFIG_CMD_NET
  85#define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  86#define CONFIG_PHY_BASE_ADR     0
  87#endif /* CONFIG_CMD_NET */
  88
  89/*
  90 *  * SATA Driver configuration
  91 *   */
  92#ifdef CONFIG_MVSATA_IDE
  93#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  94#endif /*CONFIG_MVSATA_IDE*/
  95
  96#endif /* _CONFIG_GOFLEXHOME_H */
  97