uboot/include/configs/gplugd.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (C) Copyright 2011
   4 * eInfochips Ltd. <www.einfochips.com>
   5 * Written-by: Ajay Bhargav <contact@8051projects.net>
   6 *
   7 * Based on Aspenite:
   8 * (C) Copyright 2010
   9 * Marvell Semiconductor <www.marvell.com>
  10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  11 * Contributor: Mahavir Jain <mjain@marvell.com>
  12 */
  13
  14#ifndef __CONFIG_GPLUGD_H
  15#define __CONFIG_GPLUGD_H
  16
  17/*
  18 * High Level Configuration Options
  19 */
  20#define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  21#define CONFIG_ARMADA100                1       /* SOC Family Name */
  22#define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  23#define CONFIG_MACH_TYPE                MACH_TYPE_GPLUGD /* Machine type */
  24#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  25
  26/*
  27 * There is no internal RAM in ARMADA100, using DRAM
  28 * TBD: dcache to be used for this
  29 */
  30#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  31
  32/*
  33 * Commands configuration
  34 */
  35
  36/* Network configuration */
  37#ifdef CONFIG_CMD_NET
  38#define CONFIG_ARMADA100_FEC
  39
  40/* DHCP Support */
  41#define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  42#endif /* CONFIG_CMD_NET */
  43
  44/* GPIO Support */
  45#define CONFIG_MARVELL_GPIO
  46
  47/* PHY configuration */
  48#define CONFIG_RESET_PHY_R
  49/* 88E3015 register definition */
  50#define PHY_LED_PAR_SEL_REG             22
  51#define PHY_LED_MAN_REG                 25
  52#define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  53/* GPIO Configuration for PHY */
  54#define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  55
  56/* Flash Support */
  57
  58/*
  59 * mv-common.h should be defined after CMD configs since it used them
  60 * to enable certain macros
  61 */
  62#include "mv-common.h"
  63
  64#ifdef CONFIG_SYS_NS16550_COM1
  65#undef CONFIG_SYS_NS16550_COM1
  66#endif /* CONFIG_SYS_NS16550_COM1 */
  67
  68#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  69
  70/*
  71 * Environment variables configurations
  72 */
  73#define CONFIG_ENV_SIZE                 0x4000
  74
  75#ifdef CONFIG_CMD_USB
  76#define CONFIG_USB_EHCI_ARMADA100
  77#define CONFIG_EHCI_IS_TDI
  78#endif /* CONFIG_CMD_USB */
  79
  80#endif  /* __CONFIG_GPLUGD_H */
  81