LXR uboot/include/configs/xpedite520x.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright 2008 Extreme Engineering Solutions, Inc.
   4 * Copyright 2004-2008 Freescale Semiconductor, Inc.
   5 */
   6
   7/*
   8 * xpedite520x board configuration file
   9 */
  10#ifndef __CONFIG_H
  11#define __CONFIG_H
  12
  13/*
  14 * High Level Configuration Options
  15 */
  16#define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  17#define CONFIG_SYS_FORM_PMC_XMC 1
  18
  19#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  20#define CONFIG_PCI1             1       /* PCI controller 1 */
  21#define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  22#define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  23#define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  24
  25/*
  26 * DDR config
  27 */
  28#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  29#define CONFIG_DDR_SPD
  30#define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  31#define SPD_EEPROM_ADDRESS              0x54
  32#define CONFIG_DIMM_SLOTS_PER_CTLR      1
  33#define CONFIG_CHIP_SELECTS_PER_CTRL    2
  34#define CONFIG_DDR_ECC
  35#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  36#define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  37#define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38#define CONFIG_VERY_BIG_RAM
  39
  40#define CONFIG_SYS_CLK_FREQ     66666666
  41
  42/*
  43 * These can be toggled for performance analysis, otherwise use default.
  44 */
  45#define CONFIG_L2_CACHE                 /* toggle L2 cache */
  46#define CONFIG_BTB                      /* toggle branch predition */
  47#define CONFIG_ENABLE_36BIT_PHYS        1
  48
  49#define CONFIG_SYS_CCSRBAR              0xef000000
  50#define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  51
  52/*
  53 * Diagnostics
  54 */
  55#define CONFIG_SYS_MEMTEST_START        0x10000000
  56#define CONFIG_SYS_MEMTEST_END          0x20000000
  57#define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  58                                         CONFIG_SYS_POST_I2C)
  59#define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  60                                         CONFIG_SYS_I2C_EEPROM_ADDR,    \
  61                                         CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  62                                         CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  63                                         CONFIG_SYS_I2C_RTC_ADDR}
  64
  65/*
  66 * Memory map
  67 * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  68 * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  69 * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  70 * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  71 * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  72 * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  73 * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  74 * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  75 */
  76
  77#define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  78
  79/*
  80 * NAND flash configuration
  81 */
  82#define CONFIG_SYS_NAND_BASE            0xef800000
  83#define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
  84#define CONFIG_SYS_MAX_NAND_DEVICE      1
  85#define CONFIG_NAND_ACTL
  86#define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
  87#define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
  88#define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
  89#define CONFIG_SYS_NAND_ACTL_DELAY      25
  90
  91/*
  92 * NOR flash configuration
  93 */
  94#define CONFIG_SYS_FLASH_BASE           0xfc000000
  95#define CONFIG_SYS_FLASH_BASE2          0xf8000000
  96#define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
  97#define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
  98#define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
  99#define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 100#define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 101#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 102                                                  {0xfbf40000, 0xc0000} }
 103#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 104
 105/*
 106 * Chip select configuration
 107 */
 108/* NOR Flash 0 on CS0 */
 109#define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 110                                 BR_PS_16               | \
 111                                 BR_V)
 112#define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 113                                 OR_GPCM_ACS_DIV4       | \
 114                                 OR_GPCM_SCY_8)
 115
 116/* NOR Flash 1 on CS1 */
 117#define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 118                                 BR_PS_16               | \
 119                                 BR_V)
 120#define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 121
 122/* NAND flash on CS2 */
 123#define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 124                                 BR_PS_8                | \
 125                                 BR_V)
 126
 127/* NAND flash on CS2 */
 128#define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 129                                 OR_GPCM_BCTLD          | \
 130                                 OR_GPCM_CSNT           | \
 131                                 OR_GPCM_ACS_DIV4       | \
 132                                 OR_GPCM_SCY_4          | \
 133                                 OR_GPCM_TRLX           | \
 134                                 OR_GPCM_EHTR)
 135
 136/* NAND flash on CS3 */
 137#define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 138                                 BR_PS_8                | \
 139                                 BR_V)
 140#define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 141
 142/*
 143 * Use L1 as initial stack
 144 */
 145#define CONFIG_SYS_INIT_RAM_LOCK        1
 146#define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 147#define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 148
 149#define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 150#define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 151
 152#define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 153#define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 154
 155/*
 156 * Serial Port
 157 */
 158#define CONFIG_SYS_NS16550_SERIAL
 159#define CONFIG_SYS_NS16550_REG_SIZE     1
 160#define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 161#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 162#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 163#define CONFIG_SYS_BAUDRATE_TABLE       \
 164        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 165#define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 166#define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 167
 168/*
 169 * I2C
 170 */
 171#define CONFIG_SYS_I2C
 172#define CONFIG_SYS_I2C_FSL
 173#define CONFIG_SYS_FSL_I2C_SPEED        400000
 174#define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 175#define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 176#define CONFIG_SYS_FSL_I2C2_SPEED       400000
 177#define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 178#define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 179
 180/* I2C EEPROM */
 181#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 182#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 183#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 184#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 185
 186/* I2C RTC */
 187#define CONFIG_RTC_M41T11                       1
 188#define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 189#define CONFIG_SYS_M41T11_BASE_YEAR             2000
 190
 191/* GPIO */
 192#define CONFIG_PCA953X
 193#define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 194#define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 195#define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 196
 197/* PCA957 @ 0x18 */
 198#define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 199#define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 200#define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 201#define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 202#define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 203#define CONFIG_SYS_PCA953X_NVM_WP               0x20
 204#define CONFIG_SYS_PCA953X_MONARCH              0x40
 205#define CONFIG_SYS_PCA953X_EREADY               0x80
 206
 207/* PCA957 @ 0x19 */
 208#define CONFIG_SYS_PCA953X_P14_IO0              0x01
 209#define CONFIG_SYS_PCA953X_P14_IO1              0x02
 210#define CONFIG_SYS_PCA953X_P14_IO2              0x04
 211#define CONFIG_SYS_PCA953X_P14_IO3              0x08
 212#define CONFIG_SYS_PCA953X_P14_IO4              0x10
 213#define CONFIG_SYS_PCA953X_P14_IO5              0x20
 214#define CONFIG_SYS_PCA953X_P14_IO6              0x40
 215#define CONFIG_SYS_PCA953X_P14_IO7              0x80
 216
 217/* 12-bit ADC used to measure CPU diode */
 218#define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 219
 220/*
 221 * General PCI
 222 * Memory space is mapped 1-1, but I/O space must start from 0.
 223 */
 224#define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 225#define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 226#define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 227#define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 228#define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 229#define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 230
 231/*
 232 * Networking options
 233 */
 234#define CONFIG_ETHPRIME         "eTSEC1"
 235
 236#define CONFIG_TSEC1            1
 237#define CONFIG_TSEC1_NAME       "eTSEC1"
 238#define TSEC1_FLAGS             TSEC_GIGABIT
 239#define TSEC1_PHY_ADDR          1
 240#define TSEC1_PHYIDX            0
 241#define CONFIG_HAS_ETH0
 242
 243#define CONFIG_TSEC2            1
 244#define CONFIG_TSEC2_NAME       "eTSEC2"
 245#define TSEC2_FLAGS             TSEC_GIGABIT
 246#define TSEC2_PHY_ADDR          2
 247#define TSEC2_PHYIDX            0
 248#define CONFIG_HAS_ETH1
 249
 250#define CONFIG_TSEC3    1
 251#define CONFIG_TSEC3_NAME       "eTSEC3"
 252#define TSEC3_FLAGS             TSEC_GIGABIT
 253#define TSEC3_PHY_ADDR          3
 254#define TSEC3_PHYIDX            0
 255#define CONFIG_HAS_ETH2
 256
 257#define CONFIG_TSEC4    1
 258#define CONFIG_TSEC4_NAME       "eTSEC4"
 259#define TSEC4_FLAGS             TSEC_GIGABIT
 260#define TSEC4_PHY_ADDR          4
 261#define TSEC4_PHYIDX            0
 262#define CONFIG_HAS_ETH3
 263
 264/*
 265 * BOOTP options
 266 */
 267#define CONFIG_BOOTP_BOOTFILESIZE
 268
 269/*
 270 * Miscellaneous configurable options
 271 */
 272#define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 273#define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 274#define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 275#define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 276
 277/*
 278 * For booting Linux, the board info and command line data
 279 * have to be in the first 16 MB of memory, since this is
 280 * the maximum mapped by the Linux kernel during initialization.
 281 */
 282#define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 283#define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 284
 285/*
 286 * Environment Configuration
 287 */
 288#define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 289#define CONFIG_ENV_SIZE         0x8000
 290#define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 291
 292/*
 293 * Flash memory map:
 294 * fff80000 - ffffffff     Pri U-Boot (512 KB)
 295 * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 296 * fff00000 - fff3ffff     Pri FDT (256KB)
 297 * fef00000 - ffefffff     Pri OS image (16MB)
 298 * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 299 *
 300 * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 301 * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 302 * fbf00000 - fbf3ffff     Sec FDT (256KB)
 303 * faf00000 - fbefffff     Sec OS image (16MB)
 304 * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 305 */
 306#define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 307#define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 308#define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 309#define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 310#define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 311#define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 312
 313#define CONFIG_PROG_UBOOT1                                              \
 314        "$download_cmd $loadaddr $ubootfile; "                          \
 315        "if test $? -eq 0; then "                                       \
 316                "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 317                "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 318                "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 319                "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 320                "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 321                "if test $? -ne 0; then "                               \
 322                        "echo PROGRAM FAILED; "                         \
 323                "else; "                                                \
 324                        "echo PROGRAM SUCCEEDED; "                      \
 325                "fi; "                                                  \
 326        "else; "                                                        \
 327                "echo DOWNLOAD FAILED; "                                \
 328        "fi;"
 329
 330#define CONFIG_PROG_UBOOT2                                              \
 331        "$download_cmd $loadaddr $ubootfile; "                          \
 332        "if test $? -eq 0; then "                                       \
 333                "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 334                "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 335                "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 336                "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 337                "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 338                "if test $? -ne 0; then "                               \
 339                        "echo PROGRAM FAILED; "                         \
 340                "else; "                                                \
 341                        "echo PROGRAM SUCCEEDED; "                      \
 342                "fi; "                                                  \
 343        "else; "                                                        \
 344                "echo DOWNLOAD FAILED; "                                \
 345        "fi;"
 346
 347#define CONFIG_BOOT_OS_NET                                              \
 348        "$download_cmd $osaddr $osfile; "                               \
 349        "if test $? -eq 0; then "                                       \
 350                "if test -n $fdtaddr; then "                            \
 351                        "$download_cmd $fdtaddr $fdtfile; "             \
 352                        "if test $? -eq 0; then "                       \
 353                                "bootm $osaddr - $fdtaddr; "            \
 354                        "else; "                                        \
 355                                "echo FDT DOWNLOAD FAILED; "            \
 356                        "fi; "                                          \
 357                "else; "                                                \
 358                        "bootm $osaddr; "                               \
 359                "fi; "                                                  \
 360        "else; "                                                        \
 361                "echo OS DOWNLOAD FAILED; "                             \
 362        "fi;"
 363
 364#define CONFIG_PROG_OS1                                                 \
 365        "$download_cmd $osaddr $osfile; "                               \
 366        "if test $? -eq 0; then "                                       \
 367                "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 368                "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 369                "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 370                "if test $? -ne 0; then "                               \
 371                        "echo OS PROGRAM FAILED; "                      \
 372                "else; "                                                \
 373                        "echo OS PROGRAM SUCCEEDED; "                   \
 374                "fi; "                                                  \
 375        "else; "                                                        \
 376                "echo OS DOWNLOAD FAILED; "                             \
 377        "fi;"
 378
 379#define CONFIG_PROG_OS2                                                 \
 380        "$download_cmd $osaddr $osfile; "                               \
 381        "if test $? -eq 0; then "                                       \
 382                "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 383                "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 384                "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 385                "if test $? -ne 0; then "                               \
 386                        "echo OS PROGRAM FAILED; "                      \
 387                "else; "                                                \
 388                        "echo OS PROGRAM SUCCEEDED; "                   \
 389                "fi; "                                                  \
 390        "else; "                                                        \
 391                "echo OS DOWNLOAD FAILED; "                             \
 392        "fi;"
 393
 394#define CONFIG_PROG_FDT1                                                \
 395        "$download_cmd $fdtaddr $fdtfile; "                             \
 396        "if test $? -eq 0; then "                                       \
 397                "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 398                "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 399                "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 400                "if test $? -ne 0; then "                               \
 401                        "echo FDT PROGRAM FAILED; "                     \
 402                "else; "                                                \
 403                        "echo FDT PROGRAM SUCCEEDED; "                  \
 404                "fi; "                                                  \
 405        "else; "                                                        \
 406                "echo FDT DOWNLOAD FAILED; "                            \
 407        "fi;"
 408
 409#define CONFIG_PROG_FDT2                                                \
 410        "$download_cmd $fdtaddr $fdtfile; "                             \
 411        "if test $? -eq 0; then "                                       \
 412                "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 413                "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 414                "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 415                "if test $? -ne 0; then "                               \
 416                        "echo FDT PROGRAM FAILED; "                     \
 417                "else; "                                                \
 418                        "echo FDT PROGRAM SUCCEEDED; "                  \
 419                "fi; "                                                  \
 420        "else; "                                                        \
 421                "echo FDT DOWNLOAD FAILED; "                            \
 422        "fi;"
 423
 424#define CONFIG_EXTRA_ENV_SETTINGS                                       \
 425        "autoload=yes\0"                                                \
 426        "download_cmd=tftp\0"                                           \
 427        "console_args=console=ttyS0,115200\0"                           \
 428        "root_args=root=/dev/nfs rw\0"                                  \
 429        "misc_args=ip=on\0"                                             \
 430        "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 431        "bootfile=/home/user/file\0"                                    \
 432        "osfile=/home/user/board.uImage\0"                              \
 433        "fdtfile=/home/user/board.dtb\0"                                \
 434        "ubootfile=/home/user/u-boot.bin\0"                             \
 435        "fdtaddr=0x1e00000\0"                                           \
 436        "osaddr=0x1000000\0"                                            \
 437        "loadaddr=0x1000000\0"                                          \
 438        "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 439        "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 440        "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 441        "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 442        "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 443        "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 444        "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 445        "bootcmd_flash1=run set_bootargs; "                             \
 446                "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 447        "bootcmd_flash2=run set_bootargs; "                             \
 448                "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 449        "bootcmd=run bootcmd_flash1\0"
 450#endif  /* __CONFIG_H */
 451