// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
 * Copyright 2019 NXP Semiconductors
 * Andy Fleming
 *
 * Based vaguely on the pxa mmc code:
 * (C) Copyright 2003
 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
 */

#include <config.h>
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <errno.h>
#include <hwconfig.h>
#include <mmc.h>
#include <part.h>
#include <malloc.h>
#include <fsl_esdhc.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <dm.h>

DECLARE_GLOBAL_DATA_PTR;

struct fsl_esdhc {
        uint    dsaddr;         /* SDMA system address register */
        uint    blkattr;        /* Block attributes register */
        uint    cmdarg;         /* Command argument register */
        uint    xfertyp;        /* Transfer type register */
        uint    cmdrsp0;        /* Command response 0 register */
        uint    cmdrsp1;        /* Command response 1 register */
        uint    cmdrsp2;        /* Command response 2 register */
        uint    cmdrsp3;        /* Command response 3 register */
        uint    datport;        /* Buffer data port register */
        uint    prsstat;        /* Present state register */
        uint    proctl;         /* Protocol control register */
        uint    sysctl;         /* System Control Register */
        uint    irqstat;        /* Interrupt status register */
        uint    irqstaten;      /* Interrupt status enable register */
        uint    irqsigen;       /* Interrupt signal enable register */
        uint    autoc12err;     /* Auto CMD error status register */
        uint    hostcapblt;     /* Host controller capabilities register */
        uint    wml;            /* Watermark level register */
        char    reserved1[8];   /* reserved */
        uint    fevt;           /* Force event register */
        uint    admaes;         /* ADMA error status register */
        uint    adsaddr;        /* ADMA system address register */
        char    reserved2[160];
        uint    hostver;        /* Host controller version register */
        char    reserved3[4];   /* reserved */
        uint    dmaerraddr;     /* DMA error address register */
        char    reserved4[4];   /* reserved */
        uint    dmaerrattr;     /* DMA error attribute register */
        char    reserved5[4];   /* reserved */
        uint    hostcapblt2;    /* Host controller capabilities register 2 */
        char    reserved6[756]; /* reserved */
        uint    esdhcctl;       /* eSDHC control register */
};

struct fsl_esdhc_plat {
        struct mmc_config cfg;
        struct mmc mmc;
};

/**
 * struct fsl_esdhc_priv
 *
 * @esdhc_regs: registers of the sdhc controller
 * @sdhc_clk: Current clk of the sdhc controller
 * @bus_width: bus width, 1bit, 4bit or 8bit
 * @cfg: mmc config
 * @mmc: mmc
 * Following is used when Driver Model is enabled for MMC
 * @dev: pointer for the device
 * @cd_gpio: gpio for card detection
 * @wp_gpio: gpio for write protection
 */
struct fsl_esdhc_priv {
        struct fsl_esdhc *esdhc_regs;
        unsigned int sdhc_clk;
        unsigned int clock;
#if !CONFIG_IS_ENABLED(DM_MMC)
        struct mmc *mmc;
#endif
        struct udevice *dev;
};

/* Return the XFERTYP flags for a given command and data packet */
static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
{
        uint xfertyp = 0;

        if (data) {
                xfertyp |= XFERTYP_DPSEL;
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
                xfertyp |= XFERTYP_DMAEN;
#endif
                if (data->blocks > 1) {
                        xfertyp |= XFERTYP_MSBSEL;
                        xfertyp |= XFERTYP_BCEN;
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
                        xfertyp |= XFERTYP_AC12EN;
#endif
                }

                if (data->flags & MMC_DATA_READ)
                        xfertyp |= XFERTYP_DTDSEL;
        }

        if (cmd->resp_type & MMC_RSP_CRC)
                xfertyp |= XFERTYP_CCCEN;
        if (cmd->resp_type & MMC_RSP_OPCODE)
                xfertyp |= XFERTYP_CICEN;
        if (cmd->resp_type & MMC_RSP_136)
                xfertyp |= XFERTYP_RSPTYP_136;
        else if (cmd->resp_type & MMC_RSP_BUSY)
                xfertyp |= XFERTYP_RSPTYP_48_BUSY;
        else if (cmd->resp_type & MMC_RSP_PRESENT)
                xfertyp |= XFERTYP_RSPTYP_48;

        if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
                xfertyp |= XFERTYP_CMDTYP_ABORT;

        return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
}

#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
/*
 * PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
 */
static void esdhc_pio_read_write(struct fsl_esdhc_priv *priv,
                                 struct mmc_data *data)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        uint blocks;
        char *buffer;
        uint databuf;
        uint size;
        uint irqstat;
        ulong start;

        if (data->flags & MMC_DATA_READ) {
                blocks = data->blocks;
                buffer = data->dest;
                while (blocks) {
                        start = get_timer(0);
                        size = data->blocksize;
                        irqstat = esdhc_read32(&regs->irqstat);
                        while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BREN)) {
                                if (get_timer(start) > PIO_TIMEOUT) {
                                        printf("\nData Read Failed in PIO Mode.");
                                        return;
                                }
                        }
                        while (size && (!(irqstat & IRQSTAT_TC))) {
                                udelay(100); /* Wait before last byte transfer complete */
                                irqstat = esdhc_read32(&regs->irqstat);
                                databuf = in_le32(&regs->datport);
                                *((uint *)buffer) = databuf;
                                buffer += 4;
                                size -= 4;
                        }
                        blocks--;
                }
        } else {
                blocks = data->blocks;
                buffer = (char *)data->src;
                while (blocks) {
                        start = get_timer(0);
                        size = data->blocksize;
                        irqstat = esdhc_read32(&regs->irqstat);
                        while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BWEN)) {
                                if (get_timer(start) > PIO_TIMEOUT) {
                                        printf("\nData Write Failed in PIO Mode.");
                                        return;
                                }
                        }
                        while (size && (!(irqstat & IRQSTAT_TC))) {
                                udelay(100); /* Wait before last byte transfer complete */
                                databuf = *((uint *)buffer);
                                buffer += 4;
                                size -= 4;
                                irqstat = esdhc_read32(&regs->irqstat);
                                out_le32(&regs->datport, databuf);
                        }
                        blocks--;
                }
        }
}
#endif

static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                            struct mmc_data *data)
{
        int timeout;
        struct fsl_esdhc *regs = priv->esdhc_regs;
#if defined(CONFIG_FSL_LAYERSCAPE)
        dma_addr_t addr;
#endif
        uint wml_value;

        wml_value = data->blocksize/4;

        if (data->flags & MMC_DATA_READ) {
                if (wml_value > WML_RD_WML_MAX)
                        wml_value = WML_RD_WML_MAX_VAL;

                esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE)
                addr = virt_to_phys((void *)(data->dest));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
                else
                        esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
#else
                esdhc_write32(&regs->dsaddr, (u32)data->dest);
#endif
#endif
        } else {
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
                flush_dcache_range((ulong)data->src,
                                   (ulong)data->src+data->blocks
                                         *data->blocksize);
#endif
                if (wml_value > WML_WR_WML_MAX)
                        wml_value = WML_WR_WML_MAX_VAL;

                if (!(esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL)) {
                        printf("Can not write to locked SD card.\n");
                        return -EINVAL;
                }

                esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
                                        wml_value << 16);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE)
                addr = virt_to_phys((void *)(data->src));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
                else
                        esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
#else
                esdhc_write32(&regs->dsaddr, (u32)data->src);
#endif
#endif
        }

        esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);

        /* Calculate the timeout period for data transactions */
        /*
         * 1)Timeout period = (2^(timeout+13)) SD Clock cycles
         * 2)Timeout period should be minimum 0.250sec as per SD Card spec
         *  So, Number of SD Clock cycles for 0.25sec should be minimum
         *              (SD Clock/sec * 0.25 sec) SD Clock cycles
         *              = (mmc->clock * 1/4) SD Clock cycles
         * As 1) >=  2)
         * => (2^(timeout+13)) >= mmc->clock * 1/4
         * Taking log2 both the sides
         * => timeout + 13 >= log2(mmc->clock/4)
         * Rounding up to next power of 2
         * => timeout + 13 = log2(mmc->clock/4) + 1
         * => timeout + 13 = fls(mmc->clock/4)
         *
         * However, the MMC spec "It is strongly recommended for hosts to
         * implement more than 500ms timeout value even if the card
         * indicates the 250ms maximum busy length."  Even the previous
         * value of 300ms is known to be insufficient for some cards.
         * So, we use
         * => timeout + 13 = fls(mmc->clock/2)
         */
        timeout = fls(mmc->clock/2);
        timeout -= 13;

        if (timeout > 14)
                timeout = 14;

        if (timeout < 0)
                timeout = 0;

#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
        if ((timeout == 4) || (timeout == 8) || (timeout == 12))
                timeout++;
#endif

#ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
        timeout = 0xE;
#endif
        esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);

        return 0;
}

static void check_and_invalidate_dcache_range
        (struct mmc_cmd *cmd,
         struct mmc_data *data) {
        unsigned start = 0;
        unsigned end = 0;
        unsigned size = roundup(ARCH_DMA_MINALIGN,
                                data->blocks*data->blocksize);
#if defined(CONFIG_FSL_LAYERSCAPE)
        dma_addr_t addr;

        addr = virt_to_phys((void *)(data->dest));
        if (upper_32_bits(addr))
                printf("Error found for upper 32 bits\n");
        else
                start = lower_32_bits(addr);
#else
        start = (unsigned)data->dest;
#endif
        end = start + size;
        invalidate_dcache_range(start, end);
}

/*
 * Sends a command out on the bus.  Takes the mmc pointer,
 * a command pointer, and an optional data pointer.
 */
static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                                 struct mmc_cmd *cmd, struct mmc_data *data)
{
        int     err = 0;
        uint    xfertyp;
        uint    irqstat;
        u32     flags = IRQSTAT_CC | IRQSTAT_CTOE;
        struct fsl_esdhc *regs = priv->esdhc_regs;
        unsigned long start;

#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
        if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
                return 0;
#endif

        esdhc_write32(&regs->irqstat, -1);

        sync();

        /* Wait for the bus to be idle */
        while ((esdhc_read32(&regs->prsstat) & PRSSTAT_CICHB) ||
                        (esdhc_read32(&regs->prsstat) & PRSSTAT_CIDHB))
                ;

        while (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA)
                ;

        /* Wait at least 8 SD clock cycles before the next command */
        /*
         * Note: This is way more than 8 cycles, but 1ms seems to
         * resolve timing issues with some cards
         */
        udelay(1000);

        /* Set up for a data transfer if we have one */
        if (data) {
                err = esdhc_setup_data(priv, mmc, data);
                if(err)
                        return err;

                if (data->flags & MMC_DATA_READ)
                        check_and_invalidate_dcache_range(cmd, data);
        }

        /* Figure out the transfer arguments */
        xfertyp = esdhc_xfertyp(cmd, data);

        /* Mask all irqs */
        esdhc_write32(&regs->irqsigen, 0);

        /* Send the command */
        esdhc_write32(&regs->cmdarg, cmd->cmdarg);
        esdhc_write32(&regs->xfertyp, xfertyp);

        /* Wait for the command to complete */
        start = get_timer(0);
        while (!(esdhc_read32(&regs->irqstat) & flags)) {
                if (get_timer(start) > 1000) {
                        err = -ETIMEDOUT;
                        goto out;
                }
        }

        irqstat = esdhc_read32(&regs->irqstat);

        if (irqstat & CMD_ERR) {
                err = -ECOMM;
                goto out;
        }

        if (irqstat & IRQSTAT_CTOE) {
                err = -ETIMEDOUT;
                goto out;
        }

        /* Workaround for ESDHC errata ENGcm03648 */
        if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
                int timeout = 6000;

                /* Poll on DATA0 line for cmd with busy signal for 600 ms */
                while (timeout > 0 && !(esdhc_read32(&regs->prsstat) &
                                        PRSSTAT_DAT0)) {
                        udelay(100);
                        timeout--;
                }

                if (timeout <= 0) {
                        printf("Timeout waiting for DAT0 to go high!\n");
                        err = -ETIMEDOUT;
                        goto out;
                }
        }

        /* Copy the response to the response buffer */
        if (cmd->resp_type & MMC_RSP_136) {
                u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;

                cmdrsp3 = esdhc_read32(&regs->cmdrsp3);
                cmdrsp2 = esdhc_read32(&regs->cmdrsp2);
                cmdrsp1 = esdhc_read32(&regs->cmdrsp1);
                cmdrsp0 = esdhc_read32(&regs->cmdrsp0);
                cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
                cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
                cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
                cmd->response[3] = (cmdrsp0 << 8);
        } else
                cmd->response[0] = esdhc_read32(&regs->cmdrsp0);

        /* Wait until all of the blocks are transferred */
        if (data) {
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
                esdhc_pio_read_write(priv, data);
#else
                do {
                        irqstat = esdhc_read32(&regs->irqstat);

                        if (irqstat & IRQSTAT_DTOE) {
                                err = -ETIMEDOUT;
                                goto out;
                        }

                        if (irqstat & DATA_ERR) {
                                err = -ECOMM;
                                goto out;
                        }
                } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);

                /*
                 * Need invalidate the dcache here again to avoid any
                 * cache-fill during the DMA operations such as the
                 * speculative pre-fetching etc.
                 */
                if (data->flags & MMC_DATA_READ) {
                        check_and_invalidate_dcache_range(cmd, data);
                }
#endif
        }

out:
        /* Reset CMD and DATA portions on error */
        if (err) {
                esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
                              SYSCTL_RSTC);
                while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
                        ;

                if (data) {
                        esdhc_write32(&regs->sysctl,
                                      esdhc_read32(&regs->sysctl) |
                                      SYSCTL_RSTD);
                        while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTD))
                                ;
                }
        }

        esdhc_write32(&regs->irqstat, -1);

        return err;
}

static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        int div = 1;
        int pre_div = 2;
        unsigned int sdhc_clk = priv->sdhc_clk;
        u32 time_out;
        u32 value;
        uint clk;

        if (clock < mmc->cfg->f_min)
                clock = mmc->cfg->f_min;

        while (sdhc_clk / (16 * pre_div) > clock && pre_div < 256)
                pre_div *= 2;

        while (sdhc_clk / (div * pre_div) > clock && div < 16)
                div++;

        pre_div >>= 1;
        div -= 1;

        clk = (pre_div << 8) | (div << 4);

        esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN);

        esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);

        time_out = 20;
        value = PRSSTAT_SDSTB;
        while (!(esdhc_read32(&regs->prsstat) & value)) {
                if (time_out == 0) {
                        printf("fsl_esdhc: Internal clock never stabilised.\n");
                        break;
                }
                time_out--;
                mdelay(1);
        }

        esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
}

#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        u32 value;
        u32 time_out;

        value = esdhc_read32(&regs->sysctl);

        if (enable)
                value |= SYSCTL_CKEN;
        else
                value &= ~SYSCTL_CKEN;

        esdhc_write32(&regs->sysctl, value);

        time_out = 20;
        value = PRSSTAT_SDSTB;
        while (!(esdhc_read32(&regs->prsstat) & value)) {
                if (time_out == 0) {
                        printf("fsl_esdhc: Internal clock never stabilised.\n");
                        break;
                }
                time_out--;
                mdelay(1);
        }
}
#endif

static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;

#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
        /* Select to use peripheral clock */
        esdhc_clock_control(priv, false);
        esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_PCS);
        esdhc_clock_control(priv, true);
#endif
        /* Set the clock speed */
        if (priv->clock != mmc->clock)
                set_sysctl(priv, mmc, mmc->clock);

        /* Set the bus width */
        esdhc_clrbits32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);

        if (mmc->bus_width == 4)
                esdhc_setbits32(&regs->proctl, PROCTL_DTW_4);
        else if (mmc->bus_width == 8)
                esdhc_setbits32(&regs->proctl, PROCTL_DTW_8);

        return 0;
}

static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        ulong start;

        /* Reset the entire host controller */
        esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);

        /* Wait until the controller is available */
        start = get_timer(0);
        while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA)) {
                if (get_timer(start) > 1000)
                        return -ETIMEDOUT;
        }

        /* Enable cache snooping */
        esdhc_write32(&regs->esdhcctl, 0x00000040);

        esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);

        /* Set the initial clock speed */
        mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);

        /* Disable the BRR and BWR bits in IRQSTAT */
        esdhc_clrbits32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);

        /* Put the PROCTL reg back to the default */
        esdhc_write32(&regs->proctl, PROCTL_INIT);

        /* Set timout to the maximum value */
        esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);

        return 0;
}

static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        int timeout = 1000;

#ifdef CONFIG_ESDHC_DETECT_QUIRK
        if (CONFIG_ESDHC_DETECT_QUIRK)
                return 1;
#endif
        while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
                udelay(1000);

        return timeout > 0;
}

static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
                                     struct mmc_config *cfg)
{
        struct fsl_esdhc *regs = priv->esdhc_regs;
        u32 caps;

        caps = esdhc_read32(&regs->hostcapblt);
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
        caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
#endif
#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
        caps |= HOSTCAPBLT_VS33;
#endif
        if (caps & HOSTCAPBLT_VS18)
                cfg->voltages |= MMC_VDD_165_195;
        if (caps & HOSTCAPBLT_VS30)
                cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
        if (caps & HOSTCAPBLT_VS33)
                cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;

        cfg->name = "FSL_SDHC";

        if (caps & HOSTCAPBLT_HSS)
                cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;

        cfg->f_min = 400000;
        cfg->f_max = min(priv->sdhc_clk, (u32)200000000);
        cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
}

#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
void mmc_adapter_card_type_ident(void)
{
        u8 card_id;
        u8 value;

        card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
        gd->arch.sdhc_adapter = card_id;

        switch (card_id) {
        case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
                value = QIXIS_READ(brdcfg[5]);
                value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7);
                QIXIS_WRITE(brdcfg[5], value);
                break;
        case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
                value = QIXIS_READ(pwr_ctl[1]);
                value |= QIXIS_EVDD_BY_SDHC_VS;
                QIXIS_WRITE(pwr_ctl[1], value);
                break;
        case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
                value = QIXIS_READ(brdcfg[5]);
                value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
                QIXIS_WRITE(brdcfg[5], value);
                break;
        case QIXIS_ESDHC_ADAPTER_TYPE_RSV:
                break;
        case QIXIS_ESDHC_ADAPTER_TYPE_MMC:
                break;
        case QIXIS_ESDHC_ADAPTER_TYPE_SD:
                break;
        case QIXIS_ESDHC_NO_ADAPTER:
                break;
        default:
                break;
        }
}
#endif

#ifdef CONFIG_OF_LIBFDT
__weak int esdhc_status_fixup(void *blob, const char *compat)
{
#ifdef CONFIG_FSL_ESDHC_PIN_MUX
        if (!hwconfig("esdhc")) {
                do_fixup_by_compat(blob, compat, "status", "disabled",
                                sizeof("disabled"), 1);
                return 1;
        }
#endif
        return 0;
}

void fdt_fixup_esdhc(void *blob, bd_t *bd)
{
        const char *compat = "fsl,esdhc";

        if (esdhc_status_fixup(blob, compat))
                return;

#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
        do_fixup_by_compat_u32(blob, compat, "peripheral-frequency",
                               gd->arch.sdhc_clk, 1);
#else
        do_fixup_by_compat_u32(blob, compat, "clock-frequency",
                               gd->arch.sdhc_clk, 1);
#endif
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
        do_fixup_by_compat_u32(blob, compat, "adapter-type",
                               (u32)(gd->arch.sdhc_adapter), 1);
#endif
}
#endif

#if !CONFIG_IS_ENABLED(DM_MMC)
static int esdhc_getcd(struct mmc *mmc)
{
        struct fsl_esdhc_priv *priv = mmc->priv;

        return esdhc_getcd_common(priv);
}

static int esdhc_init(struct mmc *mmc)
{
        struct fsl_esdhc_priv *priv = mmc->priv;

        return esdhc_init_common(priv, mmc);
}

static int esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
                          struct mmc_data *data)
{
        struct fsl_esdhc_priv *priv = mmc->priv;

        return esdhc_send_cmd_common(priv, mmc, cmd, data);
}

static int esdhc_set_ios(struct mmc *mmc)
{
        struct fsl_esdhc_priv *priv = mmc->priv;

        return esdhc_set_ios_common(priv, mmc);
}

static const struct mmc_ops esdhc_ops = {
        .getcd          = esdhc_getcd,
        .init           = esdhc_init,
        .send_cmd       = esdhc_send_cmd,
        .set_ios        = esdhc_set_ios,
};

int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
        struct fsl_esdhc_plat *plat;
        struct fsl_esdhc_priv *priv;
        struct mmc_config *mmc_cfg;
        struct mmc *mmc;

        if (!cfg)
                return -EINVAL;

        priv = calloc(sizeof(struct fsl_esdhc_priv), 1);
        if (!priv)
                return -ENOMEM;
        plat = calloc(sizeof(struct fsl_esdhc_plat), 1);
        if (!plat) {
                free(priv);
                return -ENOMEM;
        }

        priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base);
        priv->sdhc_clk = cfg->sdhc_clk;

        mmc_cfg = &plat->cfg;

        if (cfg->max_bus_width == 8) {
                mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT |
                                      MMC_MODE_8BIT;
        } else if (cfg->max_bus_width == 4) {
                mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT;
        } else if (cfg->max_bus_width == 1) {
                mmc_cfg->host_caps |= MMC_MODE_1BIT;
        } else {
                mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT |
                                      MMC_MODE_8BIT;
                printf("No max bus width provided. Assume 8-bit supported.\n");
        }

#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
        if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
                mmc_cfg->host_caps &= ~MMC_MODE_8BIT;
#endif
        mmc_cfg->ops = &esdhc_ops;

        fsl_esdhc_get_cfg_common(priv, mmc_cfg);

        mmc = mmc_create(mmc_cfg, priv);
        if (!mmc)
                return -EIO;

        priv->mmc = mmc;
        return 0;
}

int fsl_esdhc_mmc_init(bd_t *bis)
{
        struct fsl_esdhc_cfg *cfg;

        cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
        cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
        cfg->sdhc_clk = gd->arch.sdhc_clk;
        return fsl_esdhc_initialize(bis, cfg);
}
#else /* DM_MMC */
static int fsl_esdhc_probe(struct udevice *dev)
{
        struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);
        fdt_addr_t addr;
        struct mmc *mmc;

        addr = dev_read_addr(dev);
        if (addr == FDT_ADDR_T_NONE)
                return -EINVAL;
#ifdef CONFIG_PPC
        priv->esdhc_regs = (struct fsl_esdhc *)lower_32_bits(addr);
#else
        priv->esdhc_regs = (struct fsl_esdhc *)addr;
#endif
        priv->dev = dev;

        priv->sdhc_clk = gd->arch.sdhc_clk;
        if (priv->sdhc_clk <= 0) {
                dev_err(dev, "Unable to get clk for %s\n", dev->name);
                return -EINVAL;
        }

        fsl_esdhc_get_cfg_common(priv, &plat->cfg);

        mmc_of_parse(dev, &plat->cfg);

        mmc = &plat->mmc;
        mmc->cfg = &plat->cfg;
        mmc->dev = dev;

        upriv->mmc = mmc;

        return esdhc_init_common(priv, mmc);
}

static int fsl_esdhc_get_cd(struct udevice *dev)
{
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);

        if (plat->cfg.host_caps & MMC_CAP_NONREMOVABLE)
                return 1;

        return esdhc_getcd_common(priv);
}

static int fsl_esdhc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
                              struct mmc_data *data)
{
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);

        return esdhc_send_cmd_common(priv, &plat->mmc, cmd, data);
}

static int fsl_esdhc_set_ios(struct udevice *dev)
{
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
        struct fsl_esdhc_priv *priv = dev_get_priv(dev);

        return esdhc_set_ios_common(priv, &plat->mmc);
}

static const struct dm_mmc_ops fsl_esdhc_ops = {
        .get_cd         = fsl_esdhc_get_cd,
        .send_cmd       = fsl_esdhc_send_cmd,
        .set_ios        = fsl_esdhc_set_ios,
#ifdef MMC_SUPPORTS_TUNING
        .execute_tuning = fsl_esdhc_execute_tuning,
#endif
};

static const struct udevice_id fsl_esdhc_ids[] = {
        { .compatible = "fsl,esdhc", },
        { /* sentinel */ }
};

static int fsl_esdhc_bind(struct udevice *dev)
{
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);

        return mmc_bind(dev, &plat->mmc, &plat->cfg);
}

U_BOOT_DRIVER(fsl_esdhc) = {
        .name   = "fsl-esdhc-mmc",
        .id     = UCLASS_MMC,
        .of_match = fsl_esdhc_ids,
        .ops    = &fsl_esdhc_ops,
        .bind   = fsl_esdhc_bind,
        .probe  = fsl_esdhc_probe,
        .platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat),
        .priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),
};
#endif