uboot/include/configs/M53017EVB.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Configuation settings for the Freescale MCF53017EVB.
   4 *
   5 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   6 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   7 */
   8
   9/*
  10 * board/config.h - configuration options, board specific
  11 */
  12
  13#ifndef _M53017EVB_H
  14#define _M53017EVB_H
  15
  16/*
  17 * High Level Configuration Options
  18 * (easy to change)
  19 */
  20
  21#define CONFIG_MCFUART
  22#define CONFIG_SYS_UART_PORT            (0)
  23
  24#undef CONFIG_WATCHDOG
  25#define CONFIG_WATCHDOG_TIMEOUT         5000
  26
  27#define CONFIG_SYS_UNIFY_CACHE
  28
  29#define CONFIG_MCFFEC
  30#ifdef CONFIG_MCFFEC
  31#       define CONFIG_MII_INIT          1
  32#       define CONFIG_SYS_DISCOVER_PHY
  33#       define CONFIG_SYS_RX_ETH_BUFFER 8
  34#       define CONFIG_SYS_TX_ETH_BUFFER 8
  35#       define CONFIG_SYS_FEC_BUF_USE_SRAM
  36#       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  37#       define CONFIG_HAS_ETH1
  38
  39#       define CONFIG_SYS_FEC0_PINMUX   0
  40#       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  41#       define CONFIG_SYS_FEC1_PINMUX   0
  42#       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC1_IOBASE
  43#       define MCFFEC_TOUT_LOOP         50000
  44
  45/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  46#       ifndef CONFIG_SYS_DISCOVER_PHY
  47#               define FECDUPLEX        FULL
  48#               define FECSPEED         _100BASET
  49#       else
  50#               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  51#                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  52#               endif
  53#       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  54#endif
  55
  56#define CONFIG_MCFRTC
  57#undef RTC_DEBUG
  58#define CONFIG_SYS_RTC_CNT              (0x8000)
  59#define CONFIG_SYS_RTC_SETUP            (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
  60
  61/* Timer */
  62#define CONFIG_MCFTMR
  63#undef CONFIG_MCFPIT
  64
  65/* I2C */
  66#define CONFIG_SYS_I2C
  67#define CONFIG_SYS_I2C_FSL
  68#define CONFIG_SYS_FSL_I2C_SPEED        80000
  69#define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  70#define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
  71#define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
  72
  73#define CONFIG_UDP_CHECKSUM
  74
  75#ifdef CONFIG_MCFFEC
  76#       define CONFIG_IPADDR    192.162.1.2
  77#       define CONFIG_NETMASK   255.255.255.0
  78#       define CONFIG_SERVERIP  192.162.1.1
  79#       define CONFIG_GATEWAYIP 192.162.1.1
  80#endif                          /* FEC_ENET */
  81
  82#define CONFIG_HOSTNAME         "M53017"
  83#define CONFIG_EXTRA_ENV_SETTINGS               \
  84        "netdev=eth0\0"                         \
  85        "loadaddr=40010000\0"                   \
  86        "u-boot=u-boot.bin\0"                   \
  87        "load=tftp ${loadaddr) ${u-boot}\0"     \
  88        "upd=run load; run prog\0"              \
  89        "prog=prot off 0 3ffff;"                \
  90        "era 0 3ffff;"                          \
  91        "cp.b ${loadaddr} 0 ${filesize};"       \
  92        "save\0"                                \
  93        ""
  94
  95#define CONFIG_PRAM             512     /* 512 KB */
  96
  97#define CONFIG_SYS_LOAD_ADDR    0x40010000
  98
  99#define CONFIG_SYS_CLK          80000000
 100#define CONFIG_SYS_CPU_CLK      CONFIG_SYS_CLK * 3
 101
 102#define CONFIG_SYS_MBAR         0xFC000000
 103
 104/*
 105 * Low Level Configuration Settings
 106 * (address mappings, register initial values, etc.)
 107 * You should know what you are doing if you make changes here.
 108 */
 109/*
 110 * Definitions for initial stack pointer and data area (in DPRAM)
 111 */
 112#define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 113#define CONFIG_SYS_INIT_RAM_SIZE                0x20000 /* Size of used area in internal SRAM */
 114#define CONFIG_SYS_INIT_RAM_CTRL        0x221
 115#define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 116#define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 117
 118/*
 119 * Start addresses for the final memory configuration
 120 * (Set up by the startup code)
 121 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 122 */
 123#define CONFIG_SYS_SDRAM_BASE           0x40000000
 124#define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 125#define CONFIG_SYS_SDRAM_CFG1           0x43711630
 126#define CONFIG_SYS_SDRAM_CFG2           0x56670000
 127#define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 128#define CONFIG_SYS_SDRAM_EMOD           0x80010000
 129#define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 130
 131#define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 132#define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 133
 134#define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 135#define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 136
 137#define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 138#define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 139
 140/*
 141 * For booting Linux, the board info and command line data
 142 * have to be in the first 8 MB of memory, since this is
 143 * the maximum mapped by the Linux kernel during initialization ??
 144 */
 145#define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 146#define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 147
 148/*-----------------------------------------------------------------------
 149 * FLASH organization
 150 */
 151#ifdef CONFIG_SYS_FLASH_CFI
 152#       define CONFIG_FLASH_SPANSION_S29WS_N    1
 153#       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 154#       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 155#       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 156#       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 157#endif
 158
 159#define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 160
 161/* Configuration for environment
 162 * Environment is embedded in u-boot in the second sector of the flash
 163 */
 164
 165#define LDS_BOARD_TEXT \
 166        . = DEFINED(env_offset) ? env_offset : .; \
 167        env/embedded.o(.text*)
 168
 169/*-----------------------------------------------------------------------
 170 * Cache Configuration
 171 */
 172#define CONFIG_SYS_CACHELINE_SIZE       16
 173
 174#define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 175                                         CONFIG_SYS_INIT_RAM_SIZE - 8)
 176#define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 177                                         CONFIG_SYS_INIT_RAM_SIZE - 4)
 178#define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
 179#define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 180                                         CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 181                                         CF_ACR_EN | CF_ACR_SM_ALL)
 182#define CONFIG_SYS_CACHE_ICACR          (CF_CACR_EC | CF_CACR_CINVA | \
 183                                         CF_CACR_DCM_P)
 184
 185/*-----------------------------------------------------------------------
 186 * Chipselect bank definitions
 187 */
 188/*
 189 * CS0 - NOR Flash
 190 * CS1 - Ext SRAM
 191 * CS2 - Available
 192 * CS3 - Available
 193 * CS4 - Available
 194 * CS5 - Available
 195 */
 196#define CONFIG_SYS_CS0_BASE             0
 197#define CONFIG_SYS_CS0_MASK             0x00FF0001
 198#define CONFIG_SYS_CS0_CTRL             0x00001FA0
 199
 200#define CONFIG_SYS_CS1_BASE             0xC0000000
 201#define CONFIG_SYS_CS1_MASK             0x00070001
 202#define CONFIG_SYS_CS1_CTRL             0x00001FA0
 203
 204#endif                          /* _M53017EVB_H */
 205