LXR uboot/include/configs/dragonboard410c.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Board configuration file for Dragonboard 410C
   4 *
   5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   6 */
   7
   8#ifndef __CONFIGS_DRAGONBOARD410C_H
   9#define __CONFIGS_DRAGONBOARD410C_H
  10
  11#include <linux/sizes.h>
  12#include <asm/arch/sysmap-apq8016.h>
  13
  14/* Physical Memory Map */
  15#define PHYS_SDRAM_1                    0x80000000
  16/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
  17#define PHYS_SDRAM_1_SIZE               0x3da00000
  18#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  19#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  20#define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
  21#define CONFIG_SYS_BOOTM_LEN            SZ_64M
  22
  23/* UART */
  24
  25/* Generic Timer Definitions */
  26#define COUNTER_FREQUENCY               19000000
  27
  28/* Fixup - in init code we switch from device to host mode,
  29 * it has to be done after each HCD reset */
  30#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  31
  32/* BOOTP options */
  33#define CONFIG_BOOTP_BOOTFILESIZE
  34
  35#define BOOT_TARGET_DEVICES(func) \
  36        func(USB, usb, 0) \
  37        func(MMC, mmc, 1) \
  38        func(MMC, mmc, 0) \
  39        func(DHCP, dhcp, na)
  40
  41#include <config_distro_bootcmd.h>
  42
  43/* Does what recovery does */
  44#define REFLASH(file, part) \
  45"part start mmc 0 "#part" start && "\
  46"part size mmc 0 "#part" size && "\
  47"tftp $loadaddr "#file" && " \
  48"mmc write $loadaddr $start $size && "
  49
  50#define CONFIG_ENV_REFLASH \
  51"mmc dev 0 && "\
  52"usb start && "\
  53"dhcp && "\
  54"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
  55"mmc write $loadaddr 0 43 && " \
  56"mmc rescan && "\
  57REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
  58REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
  59REFLASH(dragonboard/rescue/rpm.mbn, 3)\
  60REFLASH(dragonboard/rescue/tz.mbn, 4)\
  61REFLASH(dragonboard/rescue/hyp.mbn, 5)\
  62REFLASH(dragonboard/rescue/sec.dat, 6)\
  63REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
  64REFLASH(dragonboard/u-boot.img, 8)\
  65"usb stop &&"\
  66"echo Reflash completed"
  67
  68/* Environment */
  69#define CONFIG_EXTRA_ENV_SETTINGS \
  70        "reflash="CONFIG_ENV_REFLASH"\0"\
  71        "loadaddr=0x81000000\0" \
  72        "fdt_high=0xffffffffffffffff\0" \
  73        "initrd_high=0xffffffffffffffff\0" \
  74        "linux_image=Image\0" \
  75        "kernel_addr_r=0x81000000\0"\
  76        "fdtfile=qcom/apq8016-sbc.dtb\0" \
  77        "fdt_addr_r=0x83000000\0"\
  78        "ramdisk_addr_r=0x84000000\0"\
  79        "scriptaddr=0x90000000\0"\
  80        "pxefile_addr_r=0x90100000\0"\
  81        BOOTENV
  82
  83#define CONFIG_SYS_MMC_ENV_DEV          0       /* mmc0 = emmc, mmc1 = sd */
  84#define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
  85
  86/* Size of malloc() pool */
  87#define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
  88
  89/* Monitor Command Prompt */
  90#define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
  91#define CONFIG_SYS_MAXARGS              64      /* max command args */
  92
  93#endif
  94