1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * Copyright 2010-2011 Calxeda, Inc. 4 */ 5 6#ifndef __CONFIG_H 7#define __CONFIG_H 8 9#define CONFIG_SYS_BOOTMAPSZ (16 << 20) 10 11#define CONFIG_SYS_TIMER_RATE (150000000/256) 12#define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) 13#define CONFIG_SYS_TIMER_COUNTS_DOWN 14 15/* 16 * Size of malloc() pool 17 */ 18#define CONFIG_SYS_MALLOC_LEN (512 * 1024) 19 20#define CONFIG_PL011_CLOCK 150000000 21#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 22 23#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 24 25#define CONFIG_SCSI_AHCI_PLAT 26#define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 27#define CONFIG_SYS_SCSI_MAX_LUN 1 28#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 29 CONFIG_SYS_SCSI_MAX_LUN) 30 31#define CONFIG_CALXEDA_XGMAC 32 33/* 34 * Command line configuration. 35 */ 36 37#define CONFIG_BOOT_RETRY_TIME -1 38#define CONFIG_RESET_TO_RETRY 39 40/* 41 * Miscellaneous configurable options 42 */ 43#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 44#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 45 46#define CONFIG_SYS_LOAD_ADDR 0x800000 47#define CONFIG_SYS_64BIT_LBA 48 49/*----------------------------------------------------------------------- 50 * Physical Memory Map 51 * The DRAM is already setup, so do not touch the DT node later. 52 */ 53#define PHYS_SDRAM_1_SIZE (4089 << 20) 54#define CONFIG_SYS_MEMTEST_START 0x100000 55#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 56 57/* Environment data setup 58*/ 59#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 60#define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 61 62#define CONFIG_SYS_SDRAM_BASE 0x00000000 63#define CONFIG_SYS_INIT_SP_ADDR 0x01000000 64#define CONFIG_SKIP_LOWLEVEL_INIT 65 66#endif 67