/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2019 NXP
 */

#ifndef __IMX8MM_EVK_H
#define __IMX8MM_EVK_H

#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>

#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CSF_SIZE                 SZ_8K
#endif

#define CONFIG_SPL_MAX_SIZE             (148 * 1024)
#define CONFIG_SYS_MONITOR_LEN          SZ_512K
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
#define CONFIG_SYS_UBOOT_BASE   \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK                0x920000
#define CONFIG_SPL_BSS_START_ADDR       0x910000
#define CONFIG_SPL_BSS_MAX_SIZE         SZ_8K   /* 8 KB */
#define CONFIG_SYS_SPL_MALLOC_START     0x42200000
#define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_512K /* 512 KB */

/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CONFIG_MALLOC_F_ADDR            0x930000
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE

#endif

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS               \
        "script=boot.scr\0" \
        "image=Image.itb\0" \
        "console=ttymxc1,115200\0" \
        "fdt_addr=0x43000000\0"                 \
        "fdt_high=0xffffffffffffffff\0"         \
        "boot_fit=try\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
        "initrd_addr=0x43800000\0"              \
        "initrd_high=0xffffffffffffffff\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
        "mmcautodetect=yes\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
        "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
                        "bootm ${loadaddr}; " \
                "else " \
                        "if run loadfdt; then " \
                                "booti ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "echo WARN: Cannot load the DT; " \
                        "fi; " \
                "fi;\0" \
        "netargs=setenv bootargs console=${console} " \
                "root=/dev/nfs " \
                "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
        "netboot=echo Booting from net ...; " \
                "run netargs;  " \
                "if test ${ip_dyn} = yes; then " \
                        "setenv get_cmd dhcp; " \
                "else " \
                        "setenv get_cmd tftp; " \
                "fi; " \
                "${get_cmd} ${loadaddr} ${image}; " \
                "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
                        "bootm ${loadaddr}; " \
                "else " \
                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
                                "booti ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "echo WARN: Cannot load the DT; " \
                        "fi; " \
                "fi;\0"

#define CONFIG_BOOTCOMMAND \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
                           "run bootscript; " \
                   "else " \
                           "if run loadimage; then " \
                                   "run mmcboot; " \
                           "else run netboot; " \
                           "fi; " \
                   "fi; " \
           "fi;"

/* Link Definitions */
#define CONFIG_LOADADDR                 0x40480000

#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR

#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE        0x200000
#define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC2 */
#define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN           SZ_32M

#define CONFIG_SYS_SDRAM_BASE           0x40000000
#define PHYS_SDRAM                      0x40000000
#define PHYS_SDRAM_SIZE                 0x80000000 /* 2GB DDR */

#define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))

#define CONFIG_MXC_UART_BASE            UART2_BASE_ADDR

/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
#define CONFIG_SYS_CBSIZE               2048
#define CONFIG_SYS_MAXARGS              64
#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)

/* USDHC */
#define CONFIG_FSL_USDHC

#define CONFIG_SYS_FSL_USDHC_NUM        2
#define CONFIG_SYS_FSL_ESDHC_ADDR       0

#define CONFIG_SYS_MMC_IMG_LOAD_PART    1

#define CONFIG_SYS_I2C_SPEED            100000

#define CONFIG_ETHPRIME                 "FEC"

#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define FEC_QUIRK_ENET_MAC

#define IMX_FEC_BASE                    0x30BE0000

#endif