LXR uboot/include/configs/omap5

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (C) Copyright 2013
   4 * Texas Instruments Incorporated.
   5 * Sricharan R    <r.sricharan@ti.com>
   6 *
   7 * Configuration settings for the TI EVM5430 board.
   8 * See ti_omap5_common.h for omap5 common settings.
   9 */
  10
  11#ifndef __CONFIG_OMAP5_EVM_H
  12#define __CONFIG_OMAP5_EVM_H
  13
  14#include <environment/ti/dfu.h>
  15
  16#ifndef CONFIG_SPL_BUILD
  17/* Define the default GPT table for eMMC */
  18#define PARTS_DEFAULT \
  19        "uuid_disk=${uuid_gpt_disk};" \
  20        "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
  21#endif
  22
  23#define DFUARGS \
  24        "dfu_bufsiz=0x10000\0" \
  25        DFU_ALT_INFO_MMC \
  26        DFU_ALT_INFO_EMMC \
  27        DFU_ALT_INFO_RAM
  28
  29#include <configs/ti_omap5_common.h>
  30
  31#define CONFIG_SYS_NS16550_COM3         UART3_BASE
  32
  33/* MMC ENV related defines */
  34#define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  35
  36/* Enhance our eMMC support / experience. */
  37#define CONFIG_HSMMC2_8BIT
  38
  39/* Required support for the TCA642X GPIO we have on the uEVM */
  40#define CONFIG_TCA642X
  41#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
  42#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
  43
  44/* USB UHH support options */
  45#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  46
  47#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
  48#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
  49
  50/* Enabled commands */
  51
  52/* USB Networking options */
  53
  54#define CONSOLEDEV              "ttyS2"
  55
  56#define CONFIG_SCSI_AHCI_PLAT
  57#define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
  58#define CONFIG_SYS_SCSI_MAX_LUN         1
  59#define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  60                                                CONFIG_SYS_SCSI_MAX_LUN)
  61
  62#endif /* __CONFIG_OMAP5_EVM_H */
  63