uboot/include/configs/uniphier.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright (C) 2012-2015 Panasonic Corporation
   4 * Copyright (C) 2015-2016 Socionext Inc.
   5 *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   6 */
   7
   8/* U-Boot - Common settings for UniPhier Family */
   9
  10#ifndef __CONFIG_UNIPHIER_COMMON_H__
  11#define __CONFIG_UNIPHIER_COMMON_H__
  12
  13#ifndef CONFIG_SPL_BUILD
  14#include <config_distro_bootcmd.h>
  15
  16#ifdef CONFIG_CMD_MMC
  17#define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0) func(MMC, mmc, 1)
  18#else
  19#define BOOT_TARGET_DEVICE_MMC(func)
  20#endif
  21
  22#ifdef CONFIG_CMD_UBIFS
  23#define BOOT_TARGET_DEVICE_UBIFS(func)  func(UBIFS, ubifs, 0)
  24#else
  25#define BOOT_TARGET_DEVICE_UBIFS(func)
  26#endif
  27
  28#ifdef CONFIG_CMD_USB
  29#define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  30#else
  31#define BOOT_TARGET_DEVICE_USB(func)
  32#endif
  33
  34#define BOOT_TARGET_DEVICES(func)       \
  35        BOOT_TARGET_DEVICE_MMC(func)    \
  36        BOOT_TARGET_DEVICE_UBIFS(func)  \
  37        BOOT_TARGET_DEVICE_USB(func)
  38#else
  39#define BOOTENV
  40#endif
  41
  42#define CONFIG_ARMV7_PSCI_1_0
  43
  44/*-----------------------------------------------------------------------
  45 * MMU and Cache Setting
  46 *----------------------------------------------------------------------*/
  47
  48#define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  49
  50#define CONFIG_TIMESTAMP
  51
  52/* FLASH related */
  53
  54#define CONFIG_SYS_MAX_FLASH_SECT       256
  55#define CONFIG_SYS_MONITOR_BASE         0
  56#define CONFIG_SYS_MONITOR_LEN          0x000d0000      /* 832KB */
  57#define CONFIG_SYS_FLASH_BASE           0
  58
  59/*
  60 * flash_toggle does not work for our support card.
  61 * We need to use flash_status_poll.
  62 */
  63#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  64
  65#define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  66
  67#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  68
  69/* serial console configuration */
  70
  71#define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  72/* Boot Argument Buffer Size */
  73#define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  74
  75#define CONFIG_SYS_MMC_ENV_DEV          0
  76#define CONFIG_SYS_MMC_ENV_PART         1
  77
  78#if !defined(CONFIG_ARM64)
  79/* Time clock 1MHz */
  80#define CONFIG_SYS_TIMER_RATE                   1000000
  81#endif
  82
  83#define CONFIG_SYS_MAX_NAND_DEVICE                      1
  84#define CONFIG_SYS_NAND_ONFI_DETECTION
  85#define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
  86#define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
  87#define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
  88
  89/*
  90 * Network Configuration
  91 */
  92#define CONFIG_SERVERIP                 192.168.11.1
  93#define CONFIG_IPADDR                   192.168.11.10
  94#define CONFIG_GATEWAYIP                192.168.11.1
  95#define CONFIG_NETMASK                  255.255.255.0
  96
  97#define CONFIG_SYS_LOAD_ADDR            0x85000000
  98#define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  99
 100#if defined(CONFIG_ARM64)
 101/* ARM Trusted Firmware */
 102#define BOOT_IMAGES \
 103        "second_image=unph_bl.bin\0" \
 104        "third_image=fip.bin\0"
 105#else
 106#define BOOT_IMAGES \
 107        "second_image=u-boot-spl.bin\0" \
 108        "third_image=u-boot.bin\0"
 109#endif
 110
 111#define CONFIG_ROOTPATH                 "/nfs/root/path"
 112#define CONFIG_NFSBOOTCOMMAND                                           \
 113        "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 114        "nfsroot=$serverip:$rootpath "                                  \
 115        "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 116                "run __nfsboot"
 117
 118#ifdef CONFIG_FIT
 119#define CONFIG_BOOTFILE                 "fitImage"
 120#define KERNEL_ADDR_R_OFFSET            "0x05100000"
 121#define LINUXBOOT_ENV_SETTINGS \
 122        "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 123                "bootm $kernel_addr_r\0" \
 124        "__nfsboot=run tftpboot\0"
 125#else
 126#ifdef CONFIG_ARM64
 127#define CONFIG_BOOTFILE                 "Image"
 128#define LINUXBOOT_CMD                   "booti"
 129#define KERNEL_ADDR_R_OFFSET            "0x02080000"
 130#else
 131#define CONFIG_BOOTFILE                 "zImage"
 132#define LINUXBOOT_CMD                   "bootz"
 133#define KERNEL_ADDR_R_OFFSET            "0x00208000"
 134#endif
 135#define LINUXBOOT_ENV_SETTINGS \
 136        "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
 137                LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 138        "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
 139                "tftpboot $fdt_addr_r $fdtfile &&" \
 140                "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 141                "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
 142                "run boot_common\0" \
 143        "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
 144                "tftpboot $fdt_addr_r $fdtfile &&" \
 145                "setenv ramdisk_addr_r - &&" \
 146                "run boot_common\0"
 147#endif
 148
 149#define CONFIG_EXTRA_ENV_SETTINGS                               \
 150        "fdt_addr_r_offset=0x05100000\0" \
 151        "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
 152        "ramdisk_addr_r_offset=0x06000000\0" \
 153        "ramdisk_file=rootfs.cpio.gz\0" \
 154        "netdev=eth0\0"                                         \
 155        "initrd_high=0xffffffffffffffff\0"                      \
 156        "loadaddr_offset=0x05000000\0" \
 157        "script=boot.scr\0" \
 158        "scriptaddr=0x85000000\0"                               \
 159        "nor_base=0x42000000\0"                                 \
 160        "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
 161        "nandboot=run bootcmd_ubifs0\0" \
 162        "norboot=run tftpboot\0" \
 163        "usbboot=run bootcmd_usb0\0" \
 164        "emmcscript=setenv devtype mmc && " \
 165                "mmcsetn && " \
 166                "setenv devnum ${mmc_first_dev} && " \
 167                "run loadscript_fat\0" \
 168        "nandscript=echo Running ${script} from ubi ... && " \
 169                "ubi part UBI && " \
 170                "ubifsmount ubi0:boot && " \
 171                "ubifsload ${loadaddr} ${script} && " \
 172                "source\0" \
 173        "norscript=echo Running ${script} from tftp ... && " \
 174                "tftpboot ${script} &&" \
 175                "source\0" \
 176        "usbscript=usb start && " \
 177                "setenv devtype usb && " \
 178                "setenv devnum 0 && " \
 179                "run loadscript_fat\0" \
 180        "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
 181                "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
 182                "source\0" \
 183        "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 184                "tftpboot $tmp_addr $second_image && " \
 185                "setexpr tmp_addr $nor_base + 0x70000 && " \
 186                "tftpboot $tmp_addr $third_image\0" \
 187        "emmcupdate=mmcsetn &&"                                 \
 188                "mmc dev $mmc_first_dev &&"                     \
 189                "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 190                "tftpboot $second_image && " \
 191                "mmc write $loadaddr 0 100 && " \
 192                "tftpboot $third_image && " \
 193                "mmc write $loadaddr 100 f00\0" \
 194        "nandupdate=nand erase 0 0x00100000 &&"                 \
 195                "tftpboot $second_image && " \
 196                "nand write $loadaddr 0 0x00020000 && " \
 197                "tftpboot $third_image && " \
 198                "nand write $loadaddr 0x00020000 0x001e0000\0" \
 199        "usbupdate=usb start &&" \
 200                "tftpboot $second_image && " \
 201                "usb write $loadaddr 0 100 && " \
 202                "tftpboot $third_image && " \
 203                "usb write $loadaddr 100 f00\0" \
 204        BOOT_IMAGES \
 205        LINUXBOOT_ENV_SETTINGS \
 206        BOOTENV
 207
 208#define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 209
 210#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 211
 212/* only for SPL */
 213#define CONFIG_SPL_STACK                (0x00200000)
 214
 215#define CONFIG_SYS_NAND_U_BOOT_OFFS             0x20000
 216
 217/* subtract sizeof(struct image_header) */
 218#define CONFIG_SYS_UBOOT_BASE                   (0x130000 - 0x40)
 219
 220#define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 221#define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 222#define CONFIG_SPL_MAX_SIZE                     0x10000
 223#define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 224
 225#define CONFIG_SPL_PAD_TO                       0x20000
 226
 227#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
 228