1/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM 2 * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993 3 * derived from Data Sheet, Copyright Motorola 1984 (!). 4 * It was written to be part of the Linux operating system. 5 */ 6/* permission is hereby granted to copy, modify and redistribute this code 7 * in terms of the GNU Library General Public License, Version 2 or later, 8 * at your option. 9 */ 10 11#ifndef _MC146818RTC_H 12#define _MC146818RTC_H 13 14#include <asm/io.h> 15#include <linux/rtc.h> /* get the user-level API */ 16#include <asm/mc146818rtc.h> /* register access macros */ 17 18/********************************************************************** 19 * register summary 20 **********************************************************************/ 21#define RTC_SECONDS 0 22#define RTC_SECONDS_ALARM 1 23#define RTC_MINUTES 2 24#define RTC_MINUTES_ALARM 3 25#define RTC_HOURS 4 26#define RTC_HOURS_ALARM 5 27/* RTC_*_alarm is always true if 2 MSBs are set */ 28# define RTC_ALARM_DONT_CARE 0xC0 29 30#define RTC_DAY_OF_WEEK 6 31#define RTC_DAY_OF_MONTH 7 32#define RTC_MONTH 8 33#define RTC_YEAR 9 34 35/* control registers - Moto names 36 */ 37#define RTC_REG_A 10 38#define RTC_REG_B 11 39#define RTC_REG_C 12 40#define RTC_REG_D 13 41 42/********************************************************************** 43 * register details 44 **********************************************************************/ 45#define RTC_FREQ_SELECT RTC_REG_A 46 47/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, 48 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, 49 * totalling to a max high interval of 2.228 ms. 50 */ 51# define RTC_UIP 0x80 52# define RTC_DIV_CTL 0x70 53 /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ 54# define RTC_REF_CLCK_4MHZ 0x00 55# define RTC_REF_CLCK_1MHZ 0x10 56# define RTC_REF_CLCK_32KHZ 0x20 57 /* 2 values for divider stage reset, others for "testing purposes only" */ 58# define RTC_DIV_RESET1 0x60 59# define RTC_DIV_RESET2 0x70 60 /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ 61# define RTC_RATE_SELECT 0x0F 62 63/**********************************************************************/ 64#define RTC_CONTROL RTC_REG_B 65# define RTC_SET 0x80 /* disable updates for clock setting */ 66# define RTC_PIE 0x40 /* periodic interrupt enable */ 67# define RTC_AIE 0x20 /* alarm interrupt enable */ 68# define RTC_UIE 0x10 /* update-finished interrupt enable */ 69# define RTC_SQWE 0x08 /* enable square-wave output */ 70# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ 71# define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ 72# define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ 73 74/**********************************************************************/ 75#define RTC_INTR_FLAGS RTC_REG_C 76/* caution - cleared by read */ 77# define RTC_IRQF 0x80 /* any of the following 3 is active */ 78# define RTC_PF 0x40 79# define RTC_AF 0x20 80# define RTC_UF 0x10 81 82/**********************************************************************/ 83#define RTC_VALID RTC_REG_D 84# define RTC_VRT 0x80 /* valid RAM and time */ 85/**********************************************************************/ 86#endif /* _MC146818RTC_H */ 87