LXR uboot/board/freescale/mx7dsabresd/mx7dsabresd.c

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4 */
   5
   6#include <init.h>
   7#include <net.h>
   8#include <asm/arch/clock.h>
   9#include <asm/arch/imx-regs.h>
  10#include <asm/arch/mx7-pins.h>
  11#include <asm/arch/sys_proto.h>
  12#include <asm/gpio.h>
  13#include <asm/mach-imx/iomux-v3.h>
  14#include <asm/io.h>
  15#include <linux/delay.h>
  16#include <linux/sizes.h>
  17#include <common.h>
  18#include <fsl_esdhc_imx.h>
  19#include <mmc.h>
  20#include <miiphy.h>
  21#include <power/pmic.h>
  22#include <power/pfuze3000_pmic.h>
  23#include "../common/pfuze.h"
  24#include <i2c.h>
  25#include <asm/mach-imx/mxc_i2c.h>
  26#include <asm/arch/crm_regs.h>
  27
  28DECLARE_GLOBAL_DATA_PTR;
  29
  30#define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | \
  31        PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
  32
  33#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
  34        PAD_CTL_DSE_3P3V_49OHM)
  35
  36#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
  37
  38#define SPI_PAD_CTRL \
  39  (PAD_CTL_HYS | PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_FAST)
  40
  41#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
  42
  43#ifdef CONFIG_MXC_SPI
  44static iomux_v3_cfg_t const ecspi3_pads[] = {
  45    MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
  46    MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
  47    MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
  48    MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
  49};
  50
  51int board_spi_cs_gpio(unsigned bus, unsigned cs)
  52{
  53         return (bus == 2 && cs == 0) ? (IMX_GPIO_NR(6, 22)) : -1;
  54}
  55
  56static void setup_spi(void)
  57{
  58         imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads));
  59}
  60#endif
  61
  62int dram_init(void)
  63{
  64        gd->ram_size = PHYS_SDRAM_SIZE;
  65
  66        return 0;
  67}
  68
  69static iomux_v3_cfg_t const wdog_pads[] = {
  70        MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
  71};
  72
  73static iomux_v3_cfg_t const uart1_pads[] = {
  74        MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
  75        MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
  76};
  77
  78#ifdef CONFIG_NAND_MXS
  79static iomux_v3_cfg_t const gpmi_pads[] = {
  80        MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  81        MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  82        MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  83        MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  84        MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  85        MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  86        MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  87        MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
  88        MX7D_PAD_SD3_CLK__NAND_CLE      | MUX_PAD_CTRL(NAND_PAD_CTRL),
  89        MX7D_PAD_SD3_CMD__NAND_ALE      | MUX_PAD_CTRL(NAND_PAD_CTRL),
  90        MX7D_PAD_SD3_STROBE__NAND_RE_B  | MUX_PAD_CTRL(NAND_PAD_CTRL),
  91        MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
  92        MX7D_PAD_SAI1_MCLK__NAND_WP_B   | MUX_PAD_CTRL(NAND_PAD_CTRL),
  93        MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B       | MUX_PAD_CTRL(NAND_PAD_CTRL),
  94        MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B       | MUX_PAD_CTRL(NAND_PAD_CTRL),
  95        MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B       | MUX_PAD_CTRL(NAND_PAD_CTRL),
  96        MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B       | MUX_PAD_CTRL(NAND_PAD_CTRL),
  97        MX7D_PAD_SAI1_TX_SYNC__NAND_DQS | MUX_PAD_CTRL(NAND_PAD_CTRL),
  98        MX7D_PAD_SAI1_TX_DATA__NAND_READY_B     | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
  99};
 100
 101static void setup_gpmi_nand(void)
 102{
 103        imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
 104
 105        /* NAND_USDHC_BUS_CLK is set in rom */
 106        set_clk_nand();
 107}
 108#endif
 109
 110#ifdef CONFIG_VIDEO_MXS
 111static iomux_v3_cfg_t const lcd_pads[] = {
 112        MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
 113        MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
 114        MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
 115        MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
 116        MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 117        MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 118        MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 119        MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 120        MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 121        MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 122        MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 123        MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 124        MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 125        MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 126        MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 127        MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 128        MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 129        MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 130        MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 131        MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 132        MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 133        MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 134        MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 135        MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 136        MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 137        MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 138        MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 139        MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
 140
 141        MX7D_PAD_LCD_RESET__GPIO3_IO4   | MUX_PAD_CTRL(LCD_PAD_CTRL),
 142};
 143
 144static iomux_v3_cfg_t const pwm_pads[] = {
 145        /* Use GPIO for Brightness adjustment, duty cycle = period */
 146        MX7D_PAD_GPIO1_IO01__GPIO1_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL),
 147};
 148
 149static int setup_lcd(void)
 150{
 151        imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
 152
 153        imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
 154
 155        /* Reset LCD */
 156        gpio_request(IMX_GPIO_NR(3, 4), "lcd reset");
 157        gpio_direction_output(IMX_GPIO_NR(3, 4) , 0);
 158        udelay(500);
 159        gpio_direction_output(IMX_GPIO_NR(3, 4) , 1);
 160
 161        /* Set Brightness to high */
 162        gpio_request(IMX_GPIO_NR(1, 1), "lcd backlight");
 163        gpio_direction_output(IMX_GPIO_NR(1, 1) , 1);
 164
 165        return 0;
 166}
 167#endif
 168
 169static void setup_iomux_uart(void)
 170{
 171        imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 172}
 173
 174int board_mmc_get_env_dev(int devno)
 175{
 176        if (devno == 2)
 177                devno--;
 178
 179        return devno;
 180}
 181
 182int mmc_map_to_kernel_blk(int dev_no)
 183{
 184        if (dev_no == 1)
 185                dev_no++;
 186
 187        return dev_no;
 188}
 189
 190#ifdef CONFIG_FEC_MXC
 191static int setup_fec(void)
 192{
 193        struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
 194                = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR;
 195
 196        /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
 197        clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
 198                (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
 199                 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
 200
 201        return set_clk_enet(ENET_125MHZ);
 202}
 203
 204int board_phy_config(struct phy_device *phydev)
 205{
 206        /* enable rgmii rxc skew and phy mode select to RGMII copper */
 207        phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x21);
 208        phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x7ea8);
 209        phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x2f);
 210        phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x71b7);
 211
 212        if (phydev->drv->config)
 213                phydev->drv->config(phydev);
 214        return 0;
 215}
 216#endif
 217
 218#ifdef CONFIG_FSL_QSPI
 219int board_qspi_init(void)
 220{
 221        /* Set the clock */
 222        set_clk_qspi();
 223
 224        return 0;
 225}
 226#endif
 227
 228int board_early_init_f(void)
 229{
 230        setup_iomux_uart();
 231
 232        return 0;
 233}
 234
 235int board_init(void)
 236{
 237        /* address of boot parameters */
 238        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 239
 240#ifdef CONFIG_FEC_MXC
 241        setup_fec();
 242#endif
 243
 244#ifdef CONFIG_NAND_MXS
 245        setup_gpmi_nand();
 246#endif
 247
 248#ifdef CONFIG_VIDEO_MXS
 249        setup_lcd();
 250#endif
 251
 252#ifdef CONFIG_FSL_QSPI
 253        board_qspi_init();
 254#endif
 255
 256#ifdef CONFIG_MXC_SPI
 257       setup_spi();
 258#endif
 259
 260        return 0;
 261}
 262
 263#ifdef CONFIG_DM_PMIC
 264int power_init_board(void)
 265{
 266        struct udevice *dev;
 267        int ret, dev_id, rev_id;
 268
 269        ret = pmic_get("pfuze3000@8", &dev);
 270        if (ret == -ENODEV)
 271                return 0;
 272        if (ret != 0)
 273                return ret;
 274
 275        dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID);
 276        rev_id = pmic_reg_read(dev, PFUZE3000_REVID);
 277        printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
 278
 279        pmic_clrsetbits(dev, PFUZE3000_LDOGCTL, 0, 1);
 280
 281        /*
 282         * Set the voltage of VLDO4 output to 2.8V which feeds
 283         * the MIPI DSI and MIPI CSI inputs.
 284         */
 285        pmic_clrsetbits(dev, PFUZE3000_VLD4CTL, 0xF, 0xA);
 286
 287        return 0;
 288}
 289#endif
 290
 291int board_late_init(void)
 292{
 293        struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
 294
 295        imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
 296
 297        set_wdog_reset(wdog);
 298
 299        /*
 300         * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
 301         * since we use PMIC_PWRON to reset the board.
 302         */
 303        clrsetbits_le16(&wdog->wcr, 0, 0x10);
 304
 305        return 0;
 306}
 307
 308int checkboard(void)
 309{
 310        char *mode;
 311
 312        if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT))
 313                mode = "secure";
 314        else
 315                mode = "non-secure";
 316
 317        printf("Board: i.MX7D SABRESD in %s mode\n", mode);
 318
 319        return 0;
 320}
 321