LXR uboot/drivers/clk/Kconfig

   1menu "Clock"
   2
   3config CLK
   4        bool "Enable clock driver support"
   5        depends on DM
   6        help
   7          This allows drivers to be provided for clock generators, including
   8          oscillators and PLLs. Devices can use a common clock API to request
   9          a particular clock rate and check on available clocks. Clocks can
  10          feed into other clocks in a tree structure, with multiplexers to
  11          choose the source for each clock.
  12
  13config SPL_CLK
  14        bool "Enable clock support in SPL"
  15        depends on CLK && SPL && SPL_DM
  16        help
  17          The clock subsystem adds a small amount of overhead to the image.
  18          If this is acceptable and you have a need to use clock drivers in
  19          SPL, enable this option. It might provide a cleaner interface to
  20          setting up clocks within SPL, and allows the same drivers to be
  21          used as U-Boot proper.
  22
  23config TPL_CLK
  24        bool "Enable clock support in TPL"
  25        depends on CLK && TPL_DM
  26        help
  27          The clock subsystem adds a small amount of overhead to the image.
  28          If this is acceptable and you have a need to use clock drivers in
  29          SPL, enable this option. It might provide a cleaner interface to
  30          setting up clocks within TPL, and allows the same drivers to be
  31          used as U-Boot proper.
  32
  33config CLK_BCM6345
  34        bool "Clock controller driver for BCM6345"
  35        depends on CLK && ARCH_BMIPS
  36        default y
  37        help
  38          This clock driver adds support for enabling and disabling peripheral
  39          clocks on BCM6345 SoCs. HW has no rate changing capabilities.
  40
  41config CLK_BOSTON
  42        def_bool y if TARGET_BOSTON
  43        depends on CLK
  44        select REGMAP
  45        select SYSCON
  46        help
  47          Enable this to support the clocks
  48
  49config SPL_CLK_CCF
  50        bool "SPL Common Clock Framework [CCF] support "
  51        depends on SPL
  52        help
  53          Enable this option if you want to (re-)use the Linux kernel's Common
  54          Clock Framework [CCF] code in U-Boot's SPL.
  55
  56config SPL_CLK_COMPOSITE_CCF
  57        bool "SPL Common Clock Framework [CCF] composite clk support "
  58        depends on SPL_CLK_CCF
  59        help
  60          Enable this option if you want to (re-)use the Linux kernel's Common
  61          Clock Framework [CCF] composite code in U-Boot's SPL.
  62
  63config CLK_CCF
  64        bool "Common Clock Framework [CCF] support "
  65        help
  66          Enable this option if you want to (re-)use the Linux kernel's Common
  67          Clock Framework [CCF] code in U-Boot's clock driver.
  68
  69config CLK_COMPOSITE_CCF
  70        bool "Common Clock Framework [CCF] composite clk support "
  71        depends on CLK_CCF
  72        help
  73          Enable this option if you want to (re-)use the Linux kernel's Common
  74          Clock Framework [CCF] composite code in U-Boot's clock driver.
  75
  76config CLK_INTEL
  77        bool "Enable clock driver for Intel x86"
  78        depends on CLK && X86
  79        help
  80          This provides very basic support for clocks on Intel SoCs. The driver
  81          is barely used at present but could be expanded as needs arise.
  82          Much clock configuration in U-Boot is either set up by the FSP, or
  83          set up by U-Boot itself but only statically. Thus the driver does not
  84          support changing clock rates, only querying them.
  85
  86config CLK_STM32F
  87        bool "Enable clock driver support for STM32F family"
  88        depends on CLK && (STM32F7 || STM32F4)
  89        default y
  90        help
  91          This clock driver adds support for RCC clock management
  92          for STM32F4 and STM32F7 SoCs.
  93
  94config CLK_TI_SCI
  95        bool "TI System Control Interface (TI SCI) clock driver"
  96        depends on CLK && TI_SCI_PROTOCOL && OF_CONTROL
  97        help
  98          This enables the clock driver support over TI System Control Interface
  99          available on some new TI's SoCs. If you wish to use clock resources
 100          managed by the TI System Controller, say Y here. Otherwise, say N.
 101
 102config CLK_HSDK
 103        bool "Enable cgu clock driver for HSDK boards"
 104        depends on CLK && TARGET_HSDK
 105        help
 106          Enable this to support the cgu clocks on Synopsys ARC HSDK and
 107          Synopsys ARC HSDK-4xD boards
 108
 109config CLK_VERSAL
 110        bool "Enable clock driver support for Versal"
 111        depends on ARCH_VERSAL
 112        select ZYNQMP_FIRMWARE
 113        help
 114          This clock driver adds support for clock realted settings for
 115          Versal platform.
 116
 117config CLK_VEXPRESS_OSC
 118        bool "Enable driver for Arm Versatile Express OSC clock generators"
 119        depends on CLK && VEXPRESS_CONFIG
 120        help
 121          This clock driver adds support for clock generators present on
 122          Arm Versatile Express platforms.
 123
 124config CLK_ZYNQ
 125        bool "Enable clock driver support for Zynq"
 126        depends on CLK && ARCH_ZYNQ
 127        default y
 128        help
 129          This clock driver adds support for clock realted settings for
 130          Zynq platform.
 131
 132config CLK_ZYNQMP
 133        bool "Enable clock driver support for ZynqMP"
 134        depends on ARCH_ZYNQMP
 135        select ZYNQMP_FIRMWARE
 136        help
 137          This clock driver adds support for clock realted settings for
 138          ZynqMP platform.
 139
 140config CLK_STM32MP1
 141        bool "Enable RCC clock driver for STM32MP1"
 142        depends on ARCH_STM32MP && CLK
 143        default y
 144        help
 145          Enable the STM32 clock (RCC) driver. Enable support for
 146          manipulating STM32MP1's on-SoC clocks.
 147
 148config CLK_CDCE9XX
 149        bool "Enable CDCD9XX clock driver"
 150        depends on CLK
 151        help
 152           Enable the clock synthesizer driver for CDCE913/925/937/949
 153           series of chips.
 154
 155source "drivers/clk/analogbits/Kconfig"
 156source "drivers/clk/at91/Kconfig"
 157source "drivers/clk/exynos/Kconfig"
 158source "drivers/clk/imx/Kconfig"
 159source "drivers/clk/meson/Kconfig"
 160source "drivers/clk/mvebu/Kconfig"
 161source "drivers/clk/owl/Kconfig"
 162source "drivers/clk/renesas/Kconfig"
 163source "drivers/clk/sunxi/Kconfig"
 164source "drivers/clk/sifive/Kconfig"
 165source "drivers/clk/tegra/Kconfig"
 166source "drivers/clk/uniphier/Kconfig"
 167
 168config ICS8N3QV01
 169        bool "Enable ICS8N3QV01 VCXO driver"
 170        depends on CLK
 171        help
 172          Support for the ICS8N3QV01 Quad-Frequency VCXO (Voltage-Controlled
 173          Crystal Oscillator). The output frequency can be programmed via an
 174          I2C interface.
 175
 176config CLK_MPC83XX
 177        bool "Enable MPC83xx clock driver"
 178        depends on CLK
 179        help
 180          Support for the clock driver of the MPC83xx series of SoCs.
 181
 182config SANDBOX_CLK_CCF
 183        bool "Sandbox Common Clock Framework [CCF] support "
 184        depends on SANDBOX
 185        select CLK_CCF
 186        help
 187          Enable this option if you want to test the Linux kernel's Common
 188          Clock Framework [CCF] code in U-Boot's Sandbox clock driver.
 189
 190endmenu
 191