LXR uboot/drivers/sound/samsung-i2s.c

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2012 Samsung Electronics
   4 * R. Chandrasekar <rcsekar@samsung.com>
   5 */
   6
   7#include <common.h>
   8#include <dm.h>
   9#include <i2s.h>
  10#include <log.h>
  11#include <sound.h>
  12#include <asm/arch/clk.h>
  13#include <asm/arch/pinmux.h>
  14#include <asm/arch/i2s-regs.h>
  15#include <asm/io.h>
  16
  17#define FIC_TX2COUNT(x)         (((x) >>  24) & 0xf)
  18#define FIC_TX1COUNT(x)         (((x) >>  16) & 0xf)
  19#define FIC_TXCOUNT(x)          (((x) >>  8) & 0xf)
  20#define FIC_RXCOUNT(x)          (((x) >>  0) & 0xf)
  21#define FICS_TXCOUNT(x)         (((x) >>  8) & 0x7f)
  22
  23#define TIMEOUT_I2S_TX          100     /* i2s transfer timeout */
  24
  25/*
  26 * Sets the frame size for I2S LR clock
  27 *
  28 * @param i2s_reg       i2s register address
  29 * @param rfs           Frame Size
  30 */
  31static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
  32{
  33        unsigned int mod = readl(&i2s_reg->mod);
  34
  35        mod &= ~MOD_RCLK_MASK;
  36
  37        switch (rfs) {
  38        case 768:
  39                mod |= MOD_RCLK_768FS;
  40                break;
  41        case 512:
  42                mod |= MOD_RCLK_512FS;
  43                break;
  44        case 384:
  45                mod |= MOD_RCLK_384FS;
  46                break;
  47        default:
  48                mod |= MOD_RCLK_256FS;
  49                break;
  50        }
  51
  52        writel(mod, &i2s_reg->mod);
  53}
  54
  55/*
  56 * Sets the i2s transfer control
  57 *
  58 * @param i2s_reg       i2s register address
  59 * @param on            1 enable tx , 0 disable tx transfer
  60 */
  61static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
  62{
  63        unsigned int con = readl(&i2s_reg->con);
  64        unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
  65
  66        if (on) {
  67                con |= CON_ACTIVE;
  68                con &= ~CON_TXCH_PAUSE;
  69        } else {
  70                con |=  CON_TXCH_PAUSE;
  71                con &= ~CON_ACTIVE;
  72        }
  73
  74        writel(mod, &i2s_reg->mod);
  75        writel(con, &i2s_reg->con);
  76}
  77
  78/*
  79 * set the bit clock frame size (in multiples of LRCLK)
  80 *
  81 * @param i2s_reg       i2s register address
  82 * @param bfs           bit Frame Size
  83 */
  84static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
  85{
  86        unsigned int mod = readl(&i2s_reg->mod);
  87
  88        mod &= ~MOD_BCLK_MASK;
  89
  90        switch (bfs) {
  91        case 48:
  92                mod |= MOD_BCLK_48FS;
  93                break;
  94        case 32:
  95                mod |= MOD_BCLK_32FS;
  96                break;
  97        case 24:
  98                mod |= MOD_BCLK_24FS;
  99                break;
 100        case 16:
 101                mod |= MOD_BCLK_16FS;
 102                break;
 103        default:
 104                return;
 105        }
 106        writel(mod, &i2s_reg->mod);
 107}
 108
 109/*
 110 * flushes the i2stx fifo
 111 *
 112 * @param i2s_reg       i2s register address
 113 * @param flush         Tx fifo flush command (0x00 - do not flush
 114 *                              0x80 - flush tx fifo)
 115 */
 116static void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
 117{
 118        /* Flush the FIFO */
 119        setbits_le32(&i2s_reg->fic, flush);
 120        clrbits_le32(&i2s_reg->fic, flush);
 121}
 122
 123/*
 124 * Set System Clock direction
 125 *
 126 * @param i2s_reg       i2s register address
 127 * @param dir           Clock direction
 128 *
 129 * @return              int value 0 for success, -1 in case of error
 130 */
 131static int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
 132{
 133        unsigned int mod = readl(&i2s_reg->mod);
 134
 135        if (dir == SND_SOC_CLOCK_IN)
 136                mod |= MOD_CDCLKCON;
 137        else
 138                mod &= ~MOD_CDCLKCON;
 139
 140        writel(mod, &i2s_reg->mod);
 141
 142        return 0;
 143}
 144
 145/*
 146 * Sets I2S Clcok format
 147 *
 148 * @param fmt           i2s clock properties
 149 * @param i2s_reg       i2s register address
 150 *
 151 * @return              int value 0 for success, -1 in case of error
 152 */
 153static int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
 154{
 155        unsigned int mod = readl(&i2s_reg->mod);
 156        unsigned int tmp = 0;
 157        unsigned int ret = 0;
 158
 159        /* Format is priority */
 160        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 161        case SND_SOC_DAIFMT_RIGHT_J:
 162                tmp |= MOD_LR_RLOW;
 163                tmp |= MOD_SDF_MSB;
 164                break;
 165        case SND_SOC_DAIFMT_LEFT_J:
 166                tmp |= MOD_LR_RLOW;
 167                tmp |= MOD_SDF_LSB;
 168                break;
 169        case SND_SOC_DAIFMT_I2S:
 170                tmp |= MOD_SDF_IIS;
 171                break;
 172        default:
 173                debug("%s: Invalid format priority [0x%x]\n", __func__,
 174                      (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
 175                return -ERANGE;
 176        }
 177
 178        /*
 179         * INV flag is relative to the FORMAT flag - if set it simply
 180         * flips the polarity specified by the Standard
 181         */
 182        switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 183        case SND_SOC_DAIFMT_NB_NF:
 184                break;
 185        case SND_SOC_DAIFMT_NB_IF:
 186                if (tmp & MOD_LR_RLOW)
 187                        tmp &= ~MOD_LR_RLOW;
 188                else
 189                        tmp |= MOD_LR_RLOW;
 190                break;
 191        default:
 192                debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
 193                      (fmt & SND_SOC_DAIFMT_INV_MASK));
 194                return -ERANGE;
 195        }
 196
 197        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 198        case SND_SOC_DAIFMT_CBS_CFS:
 199                tmp |= MOD_SLAVE;
 200                break;
 201        case SND_SOC_DAIFMT_CBM_CFM:
 202                /* Set default source clock in Master mode */
 203                ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
 204                if (ret != 0) {
 205                        debug("%s:set i2s clock direction failed\n", __func__);
 206                        return ret;
 207                }
 208                break;
 209        default:
 210                debug("%s: Invalid master selection [0x%x]\n", __func__,
 211                      (fmt & SND_SOC_DAIFMT_MASTER_MASK));
 212                return -ERANGE;
 213        }
 214
 215        mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
 216        mod |= tmp;
 217        writel(mod, &i2s_reg->mod);
 218
 219        return 0;
 220}
 221
 222/*
 223 * Sets the sample width in bits
 224 *
 225 * @param blc           samplewidth (size of sample in bits)
 226 * @param i2s_reg       i2s register address
 227 *
 228 * @return              int value 0 for success, -1 in case of error
 229 */
 230static int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
 231{
 232        unsigned int mod = readl(&i2s_reg->mod);
 233
 234        mod &= ~MOD_BLCP_MASK;
 235        mod &= ~MOD_BLC_MASK;
 236
 237        switch (blc) {
 238        case 8:
 239                mod |= MOD_BLCP_8BIT;
 240                mod |= MOD_BLC_8BIT;
 241                break;
 242        case 16:
 243                mod |= MOD_BLCP_16BIT;
 244                mod |= MOD_BLC_16BIT;
 245                break;
 246        case 24:
 247                mod |= MOD_BLCP_24BIT;
 248                mod |= MOD_BLC_24BIT;
 249                break;
 250        default:
 251                debug("%s: Invalid sample size input [0x%x]\n",
 252                      __func__, blc);
 253                return -ERANGE;
 254        }
 255        writel(mod, &i2s_reg->mod);
 256
 257        return 0;
 258}
 259
 260int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data,
 261                         uint data_size)
 262{
 263        struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address;
 264        u32 *ptr;
 265        int i;
 266        int start;
 267
 268        if (data_size < FIFO_LENGTH) {
 269                debug("%s : Invalid data size\n", __func__);
 270                return -ENODATA; /* invalid pcm data size */
 271        }
 272
 273        /* fill the tx buffer before stating the tx transmit */
 274        for (i = 0, ptr = data; i < FIFO_LENGTH; i++)
 275                writel(*ptr++, &i2s_reg->txd);
 276
 277        data_size -= sizeof(*ptr) * FIFO_LENGTH;
 278        i2s_txctrl(i2s_reg, I2S_TX_ON);
 279
 280        while (data_size > 0) {
 281                start = get_timer(0);
 282                if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
 283                        writel(*ptr++, &i2s_reg->txd);
 284                        data_size -= sizeof(*ptr);
 285                } else {
 286                        if (get_timer(start) > TIMEOUT_I2S_TX) {
 287                                i2s_txctrl(i2s_reg, I2S_TX_OFF);
 288                                debug("%s: I2S Transfer Timeout\n", __func__);
 289                                return -ETIMEDOUT;
 290                        }
 291                }
 292        }
 293        i2s_txctrl(i2s_reg, I2S_TX_OFF);
 294
 295        return 0;
 296}
 297
 298static int i2s_tx_init(struct i2s_uc_priv *pi2s_tx)
 299{
 300        int ret;
 301        struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address;
 302
 303        if (pi2s_tx->id == 0) {
 304                /* Initialize GPIO for I2S-0 */
 305                exynos_pinmux_config(PERIPH_ID_I2S0, 0);
 306
 307                /* Set EPLL Clock */
 308                ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4);
 309        } else if (pi2s_tx->id == 1) {
 310                /* Initialize GPIO for I2S-1 */
 311                exynos_pinmux_config(PERIPH_ID_I2S1, 0);
 312
 313                /* Set EPLL Clock */
 314                ret = set_epll_clk(pi2s_tx->audio_pll_clk);
 315        } else {
 316                debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id);
 317                return -ERANGE;
 318        }
 319
 320        if (ret) {
 321                debug("%s: epll clock set rate failed\n", __func__);
 322                return ret;
 323        }
 324
 325        /* Select Clk Source for Audio 0 or 1 */
 326        ret = set_i2s_clk_source(pi2s_tx->id);
 327        if (ret) {
 328                debug("%s: unsupported clock for i2s-%d\n", __func__,
 329                      pi2s_tx->id);
 330                return ret;
 331        }
 332
 333        if (pi2s_tx->id == 0) {
 334                /*Reset the i2s module */
 335                writel(CON_RESET, &i2s_reg->con);
 336
 337                writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
 338                /* set i2s prescaler */
 339                writel(PSREN | PSVAL, &i2s_reg->psr);
 340        } else {
 341                /* Set Prescaler to get MCLK */
 342                ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
 343                                (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
 344                                pi2s_tx->id);
 345        }
 346        if (ret) {
 347                debug("%s: unsupported prescalar for i2s-%d\n", __func__,
 348                      pi2s_tx->id);
 349                return ret;
 350        }
 351
 352        /* Configure I2s format */
 353        ret = i2s_set_fmt(i2s_reg, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
 354                          SND_SOC_DAIFMT_CBM_CFM);
 355        if (ret == 0) {
 356                i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
 357                ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
 358                if (ret != 0) {
 359                        debug("%s:set sample rate failed\n", __func__);
 360                        return ret;
 361                }
 362
 363                i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
 364                /* disable i2s transfer flag and flush the fifo */
 365                i2s_txctrl(i2s_reg, I2S_TX_OFF);
 366                i2s_fifo(i2s_reg, FIC_TXFLUSH);
 367        } else {
 368                debug("%s: failed\n", __func__);
 369        }
 370
 371        return ret;
 372}
 373
 374static int samsung_i2s_tx_data(struct udevice *dev, void *data, uint data_size)
 375{
 376        struct i2s_uc_priv *priv = dev_get_uclass_priv(dev);
 377
 378        return i2s_transfer_tx_data(priv, data, data_size);
 379}
 380
 381static int samsung_i2s_probe(struct udevice *dev)
 382{
 383        struct i2s_uc_priv *priv = dev_get_uclass_priv(dev);
 384
 385        return i2s_tx_init(priv);
 386}
 387
 388static int samsung_i2s_ofdata_to_platdata(struct udevice *dev)
 389{
 390        struct i2s_uc_priv *priv = dev_get_uclass_priv(dev);
 391        ulong base;
 392
 393        /*
 394         * Get the pre-defined sound specific values from FDT.
 395         * All of these are expected to be correct otherwise
 396         * wrong register values in i2s setup parameters
 397         * may result in no sound play.
 398         */
 399        base = dev_read_addr(dev);
 400        if (base == FDT_ADDR_T_NONE) {
 401                debug("%s: Missing  i2s base\n", __func__);
 402                return -EINVAL;
 403        }
 404        priv->base_address = base;
 405
 406        if (dev_read_u32u(dev, "samsung,i2s-epll-clock-frequency",
 407                          &priv->audio_pll_clk))
 408                goto err;
 409        debug("audio_pll_clk = %d\n", priv->audio_pll_clk);
 410        if (dev_read_u32u(dev, "samsung,i2s-sampling-rate",
 411                          &priv->samplingrate))
 412                goto err;
 413        debug("samplingrate = %d\n", priv->samplingrate);
 414        if (dev_read_u32u(dev, "samsung,i2s-bits-per-sample",
 415                          &priv->bitspersample))
 416                goto err;
 417        debug("bitspersample = %d\n", priv->bitspersample);
 418        if (dev_read_u32u(dev, "samsung,i2s-channels", &priv->channels))
 419                goto err;
 420        debug("channels = %d\n", priv->channels);
 421        if (dev_read_u32u(dev, "samsung,i2s-lr-clk-framesize", &priv->rfs))
 422                goto err;
 423        debug("rfs = %d\n", priv->rfs);
 424        if (dev_read_u32u(dev, "samsung,i2s-bit-clk-framesize", &priv->bfs))
 425                goto err;
 426        debug("bfs = %d\n", priv->bfs);
 427
 428        if (dev_read_u32u(dev, "samsung,i2s-id", &priv->id))
 429                goto err;
 430        debug("id = %d\n", priv->id);
 431
 432        return 0;
 433
 434err:
 435        debug("fail to get sound i2s node properties\n");
 436
 437        return -EINVAL;
 438}
 439
 440static const struct i2s_ops samsung_i2s_ops = {
 441        .tx_data        = samsung_i2s_tx_data,
 442};
 443
 444static const struct udevice_id samsung_i2s_ids[] = {
 445        { .compatible = "samsung,s5pv210-i2s" },
 446        { }
 447};
 448
 449U_BOOT_DRIVER(samsung_i2s) = {
 450        .name           = "samsung_i2s",
 451        .id             = UCLASS_I2S,
 452        .of_match       = samsung_i2s_ids,
 453        .probe          = samsung_i2s_probe,
 454        .ofdata_to_platdata     = samsung_i2s_ofdata_to_platdata,
 455        .ops            = &samsung_i2s_ops,
 456};
 457