LXR uboot/include/power/pfuze3000

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 *  Copyright (C) 2015 Freescale Semiconductor, Inc
   4 *  Peng Fan <Peng.Fan@freescale.com>
   5 */
   6#ifndef __PFUZE3000_PMIC_H_
   7#define __PFUZE3000_PMIC_H_
   8
   9/* PFUZE3000 registers */
  10enum {
  11        PFUZE3000_DEVICEID      = 0x00,
  12
  13        PFUZE3000_REVID         = 0x03,
  14        PFUZE3000_FABID         = 0x04,
  15        PFUZE3000_INTSTAT0      = 0x05,
  16        PFUZE3000_INTMASK0      = 0x06,
  17        PFUZE3000_INTSENSE0     = 0x07,
  18        PFUZE3000_INTSTAT1      = 0x08,
  19        PFUZE3000_INTMASK1      = 0x09,
  20        PFUZE3000_INTSENSE1     = 0x0A,
  21
  22        PFUZE3000_INTSTAT3      = 0x0E,
  23        PFUZE3000_INTMASK3      = 0x0F,
  24        PFUZE3000_INTSENSE3     = 0x10,
  25        PFUZE3000_INTSTAT4      = 0x11,
  26        PFUZE3000_INTMASK4      = 0x12,
  27        PFUZE3000_INTSENSE4     = 0x13,
  28
  29        PFUZE3000_COINCTL       = 0x1A,
  30        PFUZE3000_PWRCTL        = 0x1B,
  31        PFUZE3000_MEMA          = 0x1C,
  32        PFUZE3000_MEMB          = 0x1D,
  33        PFUZE3000_MEMC          = 0x1E,
  34        PFUZE3000_MEMD          = 0x1F,
  35
  36        PFUZE3000_SW1AVOLT      = 0x20,
  37        PFUZE3000_SW1ASTBY      = 0x21,
  38        PFUZE3000_SW1AOFF       = 0x22,
  39        PFUZE3000_SW1AMODE      = 0x23,
  40        PFUZE3000_SW1ACONF      = 0x24,
  41
  42        PFUZE3000_SW1BVOLT      = 0x2E,
  43        PFUZE3000_SW1BSTBY      = 0x2F,
  44        PFUZE3000_SW1BOFF       = 0x30,
  45        PFUZE3000_SW1BMODE      = 0x31,
  46        PFUZE3000_SW1BCONF      = 0x32,
  47
  48        PFUZE3000_SW2VOLT       = 0x35,
  49        PFUZE3000_SW2STBY       = 0x36,
  50        PFUZE3000_SW2OFF        = 0x37,
  51        PFUZE3000_SW2MODE       = 0x38,
  52        PFUZE3000_SW2CONF       = 0x39,
  53
  54        PFUZE3000_SW3VOLT       = 0x3C,
  55        PFUZE3000_SW3STBY       = 0x3D,
  56        PFUZE3000_SW3OFF        = 0x3E,
  57        PFUZE3000_SW3MODE       = 0x3F,
  58        PFUZE3000_SW3CONF       = 0x40,
  59
  60        PFUZE3000_SWBSTCTL      = 0x66,
  61
  62        PFUZE3000_LDOGCTL       = 0x69,
  63        PFUZE3000_VREFDDRCTL    = 0x6A,
  64        PFUZE3000_VSNVSCTL      = 0x6B,
  65        PFUZE3000_VLDO1CTL      = 0x6C,
  66        PFUZE3000_VLDO2CTL      = 0x6D,
  67        PFUZE3000_VCC_SDCTL     = 0x6E,
  68        PFUZE3000_V33CTL        = 0x6F,
  69        PFUZE3000_VLDO3CTL      = 0x70,
  70        PFUZE3000_VLD4CTL       = 0x71,
  71
  72        PFUZE3000_NUM_OF_REGS   = 0x100,
  73};
  74
  75int power_pfuze3000_init(unsigned char bus);
  76
  77/* Voltage Configuration */
  78#define PFUZE3000_SW1AB_SETP(x)    ((x - 7000) / 250)
  79#define PFUZE3000_SW3_SETP(x)      ((x - 9000) / 500)
  80#define PFUZE3000_VLDO_SETP(x)     ((x - 8000) / 500)
  81
  82#endif
  83