uboot/board/liebherr/mccmon6/spl.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2014 Wandboard
   4 * Author: Tungyi Lin <tungyilin1127@gmail.com>
   5 *         Richard Hu <hakahu@gmail.com>
   6 */
   7
   8#include <image.h>
   9#include <init.h>
  10#include <asm/arch/clock.h>
  11#include <asm/arch/imx-regs.h>
  12#include <asm/arch/iomux.h>
  13#include <asm/arch/mx6-pins.h>
  14#include <errno.h>
  15#include <asm/gpio.h>
  16#include <asm/mach-imx/iomux-v3.h>
  17#include <asm/mach-imx/video.h>
  18#include <mmc.h>
  19#include <fsl_esdhc_imx.h>
  20#include <asm/arch/crm_regs.h>
  21#include <asm/io.h>
  22#include <asm/arch/sys_proto.h>
  23#include <serial.h>
  24#include <spl.h>
  25#include <linux/delay.h>
  26
  27#include <asm/arch/mx6-ddr.h>
  28/*
  29 * Driving strength:
  30 *   0x30 == 40 Ohm
  31 *   0x28 == 48 Ohm
  32 */
  33
  34#define IMX6DQ_DRIVE_STRENGTH           0x30
  35#define IMX6SDL_DRIVE_STRENGTH          0x28
  36
  37/* configure MX6Q/DUAL mmdc DDR io registers */
  38static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
  39        .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
  40        .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
  41        .dram_cas = IMX6DQ_DRIVE_STRENGTH,
  42        .dram_ras = IMX6DQ_DRIVE_STRENGTH,
  43        .dram_reset = IMX6DQ_DRIVE_STRENGTH,
  44        .dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
  45        .dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
  46        .dram_sdba2 = 0x00000000,
  47        .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
  48        .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
  49        .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
  50        .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
  51        .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
  52        .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
  53        .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
  54        .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
  55        .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
  56        .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
  57        .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
  58        .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
  59        .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
  60        .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
  61        .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
  62        .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
  63        .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
  64        .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
  65};
  66
  67/* configure MX6Q/DUAL mmdc GRP io registers */
  68static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
  69        .grp_ddr_type = 0x000c0000,
  70        .grp_ddrmode_ctl = 0x00020000,
  71        .grp_ddrpke = 0x00000000,
  72        .grp_addds = IMX6DQ_DRIVE_STRENGTH,
  73        .grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
  74        .grp_ddrmode = 0x00020000,
  75        .grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
  76        .grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
  77        .grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
  78        .grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
  79        .grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
  80        .grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
  81        .grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
  82        .grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
  83};
  84
  85/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
  86struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
  87        .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
  88        .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
  89        .dram_cas = IMX6SDL_DRIVE_STRENGTH,
  90        .dram_ras = IMX6SDL_DRIVE_STRENGTH,
  91        .dram_reset = IMX6SDL_DRIVE_STRENGTH,
  92        .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
  93        .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
  94        .dram_sdba2 = 0x00000000,
  95        .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
  96        .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
  97        .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
  98        .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
  99        .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
 100        .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
 101        .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
 102        .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
 103        .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
 104        .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
 105        .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
 106        .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
 107        .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
 108        .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
 109        .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
 110        .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
 111        .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
 112        .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
 113};
 114
 115/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
 116struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
 117        .grp_ddr_type = 0x000c0000,
 118        .grp_ddrmode_ctl = 0x00020000,
 119        .grp_ddrpke = 0x00000000,
 120        .grp_addds = IMX6SDL_DRIVE_STRENGTH,
 121        .grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
 122        .grp_ddrmode = 0x00020000,
 123        .grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
 124        .grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
 125        .grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
 126        .grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
 127        .grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
 128        .grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
 129        .grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
 130        .grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
 131};
 132
 133/* H5T04G63AFR-PB */
 134static struct mx6_ddr3_cfg h5t04g63afr = {
 135        .mem_speed = 1600,
 136        .density = 4,
 137        .width = 16,
 138        .banks = 8,
 139        .rowaddr = 15,
 140        .coladdr = 10,
 141        .pagesz = 2,
 142        .trcd = 1375,
 143        .trcmin = 4875,
 144        .trasmin = 3500,
 145};
 146
 147/* H5TQ2G63DFR-H9 */
 148static struct mx6_ddr3_cfg h5tq2g63dfr = {
 149        .mem_speed = 1333,
 150        .density = 2,
 151        .width = 16,
 152        .banks = 8,
 153        .rowaddr = 14,
 154        .coladdr = 10,
 155        .pagesz = 2,
 156        .trcd = 1350,
 157        .trcmin = 4950,
 158        .trasmin = 3600,
 159};
 160
 161static struct mx6_mmdc_calibration mx6q_2g_mmdc_calib = {
 162        .p0_mpwldectrl0 = 0x001f001f,
 163        .p0_mpwldectrl1 = 0x001f001f,
 164        .p1_mpwldectrl0 = 0x001f001f,
 165        .p1_mpwldectrl1 = 0x001f001f,
 166        .p0_mpdgctrl0 = 0x4301030d,
 167        .p0_mpdgctrl1 = 0x03020277,
 168        .p1_mpdgctrl0 = 0x4300030a,
 169        .p1_mpdgctrl1 = 0x02780248,
 170        .p0_mprddlctl = 0x4536393b,
 171        .p1_mprddlctl = 0x36353441,
 172        .p0_mpwrdlctl = 0x41414743,
 173        .p1_mpwrdlctl = 0x462f453f,
 174};
 175
 176/* DDR 64bit 2GB */
 177static struct mx6_ddr_sysinfo mem_q = {
 178        .dsize          = 2,
 179        .cs1_mirror     = 0,
 180        /* config for full 4GB range so that get_mem_size() works */
 181        .cs_density     = 32,
 182        .ncs            = 1,
 183        .bi_on          = 1,
 184        .rtt_nom        = 1,
 185        .rtt_wr         = 0,
 186        .ralat          = 5,
 187        .walat          = 0,
 188        .mif3_mode      = 3,
 189        .rst_to_cke     = 0x23,
 190        .sde_to_rst     = 0x10,
 191};
 192
 193static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
 194        .p0_mpwldectrl0 = 0x001f001f,
 195        .p0_mpwldectrl1 = 0x001f001f,
 196        .p1_mpwldectrl0 = 0x001f001f,
 197        .p1_mpwldectrl1 = 0x001f001f,
 198        .p0_mpdgctrl0 = 0x420e020e,
 199        .p0_mpdgctrl1 = 0x02000200,
 200        .p1_mpdgctrl0 = 0x42020202,
 201        .p1_mpdgctrl1 = 0x01720172,
 202        .p0_mprddlctl = 0x494c4f4c,
 203        .p1_mprddlctl = 0x4a4c4c49,
 204        .p0_mpwrdlctl = 0x3f3f3133,
 205        .p1_mpwrdlctl = 0x39373f2e,
 206};
 207
 208static struct mx6_mmdc_calibration mx6s_512m_mmdc_calib = {
 209        .p0_mpwldectrl0 = 0x0040003c,
 210        .p0_mpwldectrl1 = 0x0032003e,
 211        .p0_mpdgctrl0 = 0x42350231,
 212        .p0_mpdgctrl1 = 0x021a0218,
 213        .p0_mprddlctl = 0x4b4b4e49,
 214        .p0_mpwrdlctl = 0x3f3f3035,
 215};
 216
 217/* DDR 64bit 1GB */
 218static struct mx6_ddr_sysinfo mem_dl = {
 219        .dsize          = 2,
 220        .cs1_mirror     = 0,
 221        /* config for full 4GB range so that get_mem_size() works */
 222        .cs_density     = 32,
 223        .ncs            = 1,
 224        .bi_on          = 1,
 225        .rtt_nom        = 1,
 226        .rtt_wr         = 0,
 227        .ralat          = 5,
 228        .walat          = 0,
 229        .mif3_mode      = 3,
 230        .rst_to_cke     = 0x23,
 231        .sde_to_rst     = 0x10,
 232};
 233
 234/* DDR 32bit 512MB */
 235static struct mx6_ddr_sysinfo mem_s = {
 236        .dsize          = 1,
 237        .cs1_mirror     = 0,
 238        /* config for full 4GB range so that get_mem_size() works */
 239        .cs_density     = 32,
 240        .ncs            = 1,
 241        .bi_on          = 1,
 242        .rtt_nom        = 1,
 243        .rtt_wr         = 0,
 244        .ralat          = 5,
 245        .walat          = 0,
 246        .mif3_mode      = 3,
 247        .rst_to_cke     = 0x23,
 248        .sde_to_rst     = 0x10,
 249};
 250
 251static void ccgr_init(void)
 252{
 253        struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 254
 255        writel(0x00C03F3F, &ccm->CCGR0);
 256        writel(0x0030FC03, &ccm->CCGR1);
 257        writel(0x0FFFC000, &ccm->CCGR2);
 258        writel(0x3FF00000, &ccm->CCGR3);
 259        writel(0x00FFF300, &ccm->CCGR4);
 260        writel(0x0F0000C3, &ccm->CCGR5);
 261        writel(0x000003FF, &ccm->CCGR6);
 262}
 263
 264static void spl_dram_init(void)
 265{
 266        if (is_cpu_type(MXC_CPU_MX6SOLO)) {
 267                mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
 268                mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63dfr);
 269        } else if (is_cpu_type(MXC_CPU_MX6DL)) {
 270                mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
 271                mx6_dram_cfg(&mem_dl, &mx6dl_1g_mmdc_calib, &h5tq2g63dfr);
 272        } else if (is_cpu_type(MXC_CPU_MX6Q)) {
 273                mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
 274                mx6_dram_cfg(&mem_q, &mx6q_2g_mmdc_calib, &h5t04g63afr);
 275        }
 276
 277        udelay(100);
 278}
 279
 280static void setup_spi(void)
 281{
 282        enable_spi_clk(true, 2);
 283}
 284
 285#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                   \
 286        PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
 287        PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 288
 289static iomux_v3_cfg_t const uart1_pads[] = {
 290        IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 291        IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 292};
 293
 294static void setup_iomux_uart(void)
 295{
 296        SETUP_IOMUX_PADS(uart1_pads);
 297}
 298
 299void board_init_f(ulong dummy)
 300{
 301        ccgr_init();
 302
 303        /* setup AIPS and disable watchdog */
 304        arch_cpu_init();
 305
 306        gpr_init();
 307
 308        /* iomux */
 309        setup_iomux_uart();
 310
 311        /* setup GP timer */
 312        timer_init();
 313
 314        /* UART clocks enabled and gd valid - init serial console */
 315        preloader_console_init();
 316
 317        /* enable ECSPI clocks */
 318        setup_spi();
 319
 320        /* DDR initialization */
 321        spl_dram_init();
 322}
 323
 324void board_boot_order(u32 *spl_boot_list)
 325{
 326        switch (spl_boot_device()) {
 327        case BOOT_DEVICE_MMC2:
 328        case BOOT_DEVICE_MMC1:
 329                spl_boot_list[0] = BOOT_DEVICE_MMC2;
 330                spl_boot_list[1] = BOOT_DEVICE_MMC1;
 331                break;
 332
 333        case BOOT_DEVICE_NOR:
 334                spl_boot_list[0] = BOOT_DEVICE_NOR;
 335                break;
 336        }
 337}
 338
 339#ifdef CONFIG_SPL_LOAD_FIT
 340int board_fit_config_name_match(const char *name)
 341{
 342        return 0;
 343}
 344#endif
 345
 346#ifdef CONFIG_SPL_OS_BOOT
 347int spl_start_uboot(void)
 348{
 349        char s[16];
 350        int ret;
 351        /*
 352         * We use BOOT_DEVICE_MMC1, but SD card is connected
 353         * to MMC2
 354         *
 355         * Correct "mapping" is delivered in board defined
 356         * board_boot_order() function.
 357         *
 358         * SD card boot is regarded as a "development" one,
 359         * hence we _always_ go through the u-boot.
 360         *
 361         */
 362        if (spl_boot_device() == BOOT_DEVICE_MMC1)
 363                return 1;
 364
 365        /* break into full u-boot on 'c' */
 366        if (serial_tstc() && serial_getc() == 'c')
 367                return 1;
 368
 369        env_init();
 370        ret = env_get_f("boot_os", s, sizeof(s));
 371        if ((ret != -1) && (strcmp(s, "no") == 0))
 372                return 1;
 373
 374        /*
 375         * Check if SWUpdate recovery needs to be started
 376         *
 377         * recovery_status = NULL (not set - ret == -1) -> normal operation
 378         *
 379         * recovery_status = progress or
 380         * recovery_status = failed   or
 381         * recovery_status = <any value> -> start SWUpdate
 382         *
 383         */
 384        ret = env_get_f("recovery_status", s, sizeof(s));
 385        if (ret != -1)
 386                return 1;
 387
 388        return 0;
 389}
 390#endif /* CONFIG_SPL_OS_BOOT */
 391
 392#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |          \
 393        PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
 394        PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST)
 395
 396#define NOR_WP                  IMX_GPIO_NR(1, 1)
 397
 398static iomux_v3_cfg_t const eimnor_pads[] = {
 399        IOMUX_PADS(PAD_EIM_D16__EIM_DATA16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 400        IOMUX_PADS(PAD_EIM_D17__EIM_DATA17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 401        IOMUX_PADS(PAD_EIM_D18__EIM_DATA18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 402        IOMUX_PADS(PAD_EIM_D19__EIM_DATA19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 403        IOMUX_PADS(PAD_EIM_D20__EIM_DATA20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 404        IOMUX_PADS(PAD_EIM_D21__EIM_DATA21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 405        IOMUX_PADS(PAD_EIM_D22__EIM_DATA22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 406        IOMUX_PADS(PAD_EIM_D23__EIM_DATA23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 407        IOMUX_PADS(PAD_EIM_D24__EIM_DATA24 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 408        IOMUX_PADS(PAD_EIM_D25__EIM_DATA25 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 409        IOMUX_PADS(PAD_EIM_D26__EIM_DATA26 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 410        IOMUX_PADS(PAD_EIM_D27__EIM_DATA27 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 411        IOMUX_PADS(PAD_EIM_D28__EIM_DATA28 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 412        IOMUX_PADS(PAD_EIM_D29__EIM_DATA29 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 413        IOMUX_PADS(PAD_EIM_D30__EIM_DATA30 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 414        IOMUX_PADS(PAD_EIM_D31__EIM_DATA31 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 415        IOMUX_PADS(PAD_EIM_DA0__EIM_AD00   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 416        IOMUX_PADS(PAD_EIM_DA1__EIM_AD01   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 417        IOMUX_PADS(PAD_EIM_DA2__EIM_AD02   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 418        IOMUX_PADS(PAD_EIM_DA3__EIM_AD03   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 419        IOMUX_PADS(PAD_EIM_DA4__EIM_AD04   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 420        IOMUX_PADS(PAD_EIM_DA5__EIM_AD05   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 421        IOMUX_PADS(PAD_EIM_DA6__EIM_AD06   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 422        IOMUX_PADS(PAD_EIM_DA7__EIM_AD07   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 423        IOMUX_PADS(PAD_EIM_DA8__EIM_AD08   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 424        IOMUX_PADS(PAD_EIM_DA9__EIM_AD09   | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 425        IOMUX_PADS(PAD_EIM_DA10__EIM_AD10  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 426        IOMUX_PADS(PAD_EIM_DA11__EIM_AD11  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 427        IOMUX_PADS(PAD_EIM_DA12__EIM_AD12  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 428        IOMUX_PADS(PAD_EIM_DA13__EIM_AD13  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 429        IOMUX_PADS(PAD_EIM_DA14__EIM_AD14  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 430        IOMUX_PADS(PAD_EIM_DA15__EIM_AD15  | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 431        IOMUX_PADS(PAD_EIM_A16__EIM_ADDR16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 432        IOMUX_PADS(PAD_EIM_A17__EIM_ADDR17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 433        IOMUX_PADS(PAD_EIM_A18__EIM_ADDR18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 434        IOMUX_PADS(PAD_EIM_A19__EIM_ADDR19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 435        IOMUX_PADS(PAD_EIM_A20__EIM_ADDR20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 436        IOMUX_PADS(PAD_EIM_A21__EIM_ADDR21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 437        IOMUX_PADS(PAD_EIM_A22__EIM_ADDR22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 438        IOMUX_PADS(PAD_EIM_A23__EIM_ADDR23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 439        IOMUX_PADS(PAD_EIM_A24__EIM_ADDR24 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 440        IOMUX_PADS(PAD_EIM_A25__EIM_ADDR25 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
 441        IOMUX_PADS(PAD_EIM_OE__EIM_OE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
 442        IOMUX_PADS(PAD_EIM_RW__EIM_RW           | MUX_PAD_CTRL(NO_PAD_CTRL)),
 443        IOMUX_PADS(PAD_EIM_CS0__EIM_CS0_B       | MUX_PAD_CTRL(NO_PAD_CTRL)),
 444        IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01       | MUX_PAD_CTRL(NO_PAD_CTRL)),
 445};
 446
 447static void eimnor_cs_setup(void)
 448{
 449        struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
 450
 451        /* NOR configuration */
 452        writel(0x00620181, &weim_regs->cs0gcr1);
 453        writel(0x00000001, &weim_regs->cs0gcr2);
 454        writel(0x0b020000, &weim_regs->cs0rcr1);
 455        writel(0x0000b000, &weim_regs->cs0rcr2);
 456        writel(0x0804a240, &weim_regs->cs0wcr1);
 457        writel(0x00000000, &weim_regs->cs0wcr2);
 458
 459        writel(0x00000120, &weim_regs->wcr);
 460        writel(0x00000010, &weim_regs->wiar);
 461        writel(0x00000000, &weim_regs->ear);
 462
 463        set_chipselect_size(CS0_128);
 464}
 465
 466static void setup_eimnor(void)
 467{
 468        SETUP_IOMUX_PADS(eimnor_pads);
 469        gpio_direction_output(NOR_WP, 1);
 470
 471        enable_eim_clk(1);
 472        eimnor_cs_setup();
 473}
 474
 475#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                    \
 476        PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
 477        PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 478
 479#define USDHC2_CD_GPIO          IMX_GPIO_NR(1, 4)
 480
 481static iomux_v3_cfg_t const usdhc2_pads[] = {
 482        IOMUX_PADS(PAD_SD2_CLK__SD2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 483        IOMUX_PADS(PAD_SD2_CMD__SD2_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 484        IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 485        IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 486        IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 487        IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 488        /* Carrier MicroSD Card Detect */
 489        IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04  | MUX_PAD_CTRL(NO_PAD_CTRL)),
 490};
 491
 492static iomux_v3_cfg_t const usdhc3_pads[] = {
 493        IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 494        IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 495        IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 496        IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 497        IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 498        IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 499        IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 500        IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 501        IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 502        IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 503        IOMUX_PADS(PAD_SD3_RST__SD3_RESET  | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 504};
 505
 506static struct fsl_esdhc_cfg usdhc_cfg[2] = {
 507        {USDHC3_BASE_ADDR},
 508        {USDHC2_BASE_ADDR},
 509};
 510
 511int board_mmc_getcd(struct mmc *mmc)
 512{
 513        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 514        int ret = 0;
 515
 516        switch (cfg->esdhc_base) {
 517        case USDHC2_BASE_ADDR:
 518                ret = !gpio_get_value(USDHC2_CD_GPIO);
 519                break;
 520        case USDHC3_BASE_ADDR:
 521                /*
 522                 * eMMC don't have card detect pin - since it is soldered to the
 523                 * PCB board
 524                 */
 525                ret = 1;
 526                break;
 527        }
 528        return ret;
 529}
 530
 531int board_mmc_init(struct bd_info *bis)
 532{
 533        int ret;
 534        u32 index = 0;
 535
 536        /*
 537         * MMC MAP
 538         * (U-Boot device node)    (Physical Port)
 539         * mmc0                    Soldered on board eMMC device
 540         * mmc1                    MicroSD card
 541         */
 542        for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 543                switch (index) {
 544                case 0:
 545                        SETUP_IOMUX_PADS(usdhc3_pads);
 546                        usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 547                        usdhc_cfg[0].max_bus_width = 8;
 548                        break;
 549                case 1:
 550                        SETUP_IOMUX_PADS(usdhc2_pads);
 551                        usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 552                        usdhc_cfg[1].max_bus_width = 4;
 553                        gpio_direction_input(USDHC2_CD_GPIO);
 554                        break;
 555                default:
 556                        printf("Warning: More USDHC controllers (%d) than supported (%d)\n",
 557                               index + 1, CONFIG_SYS_FSL_USDHC_NUM);
 558                        return -EINVAL;
 559                }
 560
 561                ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
 562                if (ret)
 563                        return ret;
 564        }
 565
 566        return 0;
 567}
 568
 569#ifdef CONFIG_SPL_BOARD_INIT
 570#define DISPLAY_EN              IMX_GPIO_NR(1, 2)
 571void spl_board_init(void)
 572{
 573        setup_eimnor();
 574
 575        gpio_direction_output(DISPLAY_EN, 1);
 576}
 577#endif /* CONFIG_SPL_BOARD_INIT */
 578