LXR uboot/include/configs/pcl063.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright (C) 2018 Collabora Ltd.
   4 *
   5 * Based on include/configs/xpress.h:
   6 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
   7 */
   8#ifndef __PCL063_H
   9#define __PCL063_H
  10
  11#include <linux/sizes.h>
  12#include "mx6_common.h"
  13
  14/* SPL options */
  15#include "imx6_spl.h"
  16
  17/*
  18 * There is a bug in some i.MX6UL processors that results in the initial
  19 * portion of OCRAM being unavailable when booting from (at least) an SD
  20 * card.
  21 *
  22 * Tweak the SPL text base address to avoid this.
  23 */
  24
  25#define CONFIG_SYS_FSL_USDHC_NUM        1
  26
  27/* Size of malloc() pool */
  28#define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  29
  30/* Console configs */
  31#define CONFIG_MXC_UART_BASE            UART1_BASE
  32
  33/* MMC Configs */
  34
  35#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
  36
  37/* Miscellaneous configurable options */
  38
  39#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  40#define CONFIG_SYS_HZ                   1000
  41
  42/* Physical Memory Map */
  43#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  44#define PHYS_SDRAM_SIZE                 SZ_256M
  45
  46#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  47#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  48#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  49
  50#define CONFIG_SYS_INIT_SP_OFFSET \
  51        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  52#define CONFIG_SYS_INIT_SP_ADDR \
  53        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  54
  55/* NAND */
  56#define CONFIG_SYS_MAX_NAND_DEVICE      1
  57#define CONFIG_SYS_NAND_BASE            0x40000000
  58
  59/* USB Configs */
  60#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  61#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  62#define CONFIG_MXC_USB_FLAGS            0
  63#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  64
  65#define CONFIG_IMX_THERMAL
  66
  67#define CONFIG_EXTRA_ENV_SETTINGS \
  68        "console=ttymxc0,115200n8\0" \
  69        "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  70        "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  71        "fdt_addr_r=0x82000000\0" \
  72        "fdt_high=0xffffffff\0" \
  73        "initrd_high=0xffffffff\0" \
  74        "kernel_addr_r=0x81000000\0" \
  75        "pxefile_addr_r=0x87100000\0" \
  76        "ramdisk_addr_r=0x82100000\0" \
  77        "scriptaddr=0x87000000\0" \
  78        BOOTENV
  79
  80#define BOOT_TARGET_DEVICES(func) \
  81        func(MMC, mmc, 0) \
  82        func(UBIFS, ubifs, 0) \
  83        func(PXE, pxe, na) \
  84        func(DHCP, dhcp, na)
  85
  86#include <config_distro_bootcmd.h>
  87
  88#endif /* __PCL063_H */
  89