1
2
3
4
5
6
7
8
9
10
11#include <log.h>
12#include <version.h>
13#include <common.h>
14#include <env.h>
15#include <fdtdec.h>
16#include <i2c.h>
17#include <lcd.h>
18#include <asm/global_data.h>
19#include <linux/delay.h>
20#include "bur_common.h"
21
22DECLARE_GLOBAL_DATA_PTR;
23
24
25#if defined(CONFIG_LCD) && defined(CONFIG_AM335X_LCD) && \
26 !defined(CONFIG_DM_VIDEO) && !defined(CONFIG_SPL_BUILD)
27#include <asm/arch/hardware.h>
28#include <asm/arch/cpu.h>
29#include <asm/gpio.h>
30#include <power/tps65217.h>
31#include "../../../drivers/video/ti/am335x-fb.h"
32
33void lcdbacklight(int on)
34{
35 unsigned int driver = env_get_ulong("ds1_bright_drv", 16, 0UL);
36 unsigned int bright = env_get_ulong("ds1_bright_def", 10, 50);
37 unsigned int pwmfrq = env_get_ulong("ds1_pwmfreq", 10, ~0UL);
38 unsigned int tmp;
39 struct gptimer *timerhw;
40
41 if (on)
42 bright = bright != ~0UL ? bright : 50;
43 else
44 bright = 0;
45
46 switch (driver) {
47 case 2:
48 timerhw = (struct gptimer *)DM_TIMER5_BASE;
49 break;
50 default:
51 timerhw = (struct gptimer *)DM_TIMER6_BASE;
52 }
53
54 switch (driver) {
55 case 0:
56
57 tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
58 TPS65217_WLEDCTRL2, bright, 0xFF);
59
60 tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
61 TPS65217_WLEDCTRL1,
62 bright != 0 ? 0x0A : 0x02,
63 0xFF);
64 break;
65 case 1:
66 case 2:
67 if (pwmfrq != ~0UL) {
68 timerhw->tiocp_cfg = TCFG_RESET;
69 udelay(10);
70 while (timerhw->tiocp_cfg & TCFG_RESET)
71 ;
72 tmp = ~0UL-(V_OSCK/pwmfrq);
73 timerhw->tldr = tmp;
74 timerhw->tcrr = tmp;
75 tmp = tmp + ((V_OSCK/pwmfrq)/100) * bright;
76 timerhw->tmar = tmp;
77 timerhw->tclr = (TCLR_PT | (2 << TCLR_TRG_SHIFT) |
78 TCLR_CE | TCLR_AR | TCLR_ST);
79 } else {
80 puts("invalid pwmfrq in env/dtb! skip PWM-setup.\n");
81 }
82 break;
83 default:
84 puts("no suitable backlightdriver in env/dtb!\n");
85 break;
86 }
87}
88
89int load_lcdtiming(struct am335x_lcdpanel *panel)
90{
91 struct am335x_lcdpanel pnltmp;
92
93 pnltmp.hactive = env_get_ulong("ds1_hactive", 10, ~0UL);
94 pnltmp.vactive = env_get_ulong("ds1_vactive", 10, ~0UL);
95 pnltmp.bpp = env_get_ulong("ds1_bpp", 10, ~0UL);
96 pnltmp.hfp = env_get_ulong("ds1_hfp", 10, ~0UL);
97 pnltmp.hbp = env_get_ulong("ds1_hbp", 10, ~0UL);
98 pnltmp.hsw = env_get_ulong("ds1_hsw", 10, ~0UL);
99 pnltmp.vfp = env_get_ulong("ds1_vfp", 10, ~0UL);
100 pnltmp.vbp = env_get_ulong("ds1_vbp", 10, ~0UL);
101 pnltmp.vsw = env_get_ulong("ds1_vsw", 10, ~0UL);
102 pnltmp.pxl_clk = env_get_ulong("ds1_pxlclk", 10, ~0UL);
103 pnltmp.pol = env_get_ulong("ds1_pol", 16, ~0UL);
104 pnltmp.pup_delay = env_get_ulong("ds1_pupdelay", 10, ~0UL);
105 pnltmp.pon_delay = env_get_ulong("ds1_tondelay", 10, ~0UL);
106 panel_info.vl_rot = env_get_ulong("ds1_rotation", 10, 0);
107
108 if (
109 ~0UL == (pnltmp.hactive) ||
110 ~0UL == (pnltmp.vactive) ||
111 ~0UL == (pnltmp.bpp) ||
112 ~0UL == (pnltmp.hfp) ||
113 ~0UL == (pnltmp.hbp) ||
114 ~0UL == (pnltmp.hsw) ||
115 ~0UL == (pnltmp.vfp) ||
116 ~0UL == (pnltmp.vbp) ||
117 ~0UL == (pnltmp.vsw) ||
118 ~0UL == (pnltmp.pxl_clk) ||
119 ~0UL == (pnltmp.pol) ||
120 ~0UL == (pnltmp.pup_delay) ||
121 ~0UL == (pnltmp.pon_delay)
122 ) {
123 puts("lcd-settings in env/dtb incomplete!\n");
124 printf("display-timings:\n"
125 "================\n"
126 "hactive: %d\n"
127 "vactive: %d\n"
128 "bpp : %d\n"
129 "hfp : %d\n"
130 "hbp : %d\n"
131 "hsw : %d\n"
132 "vfp : %d\n"
133 "vbp : %d\n"
134 "vsw : %d\n"
135 "pxlclk : %d\n"
136 "pol : 0x%08x\n"
137 "pondly : %d\n",
138 pnltmp.hactive, pnltmp.vactive, pnltmp.bpp,
139 pnltmp.hfp, pnltmp.hbp, pnltmp.hsw,
140 pnltmp.vfp, pnltmp.vbp, pnltmp.vsw,
141 pnltmp.pxl_clk, pnltmp.pol, pnltmp.pon_delay);
142
143 return -1;
144 }
145 debug("lcd-settings in env complete, taking over.\n");
146 memcpy((void *)panel,
147 (void *)&pnltmp,
148 sizeof(struct am335x_lcdpanel));
149
150 return 0;
151}
152
153static void br_summaryscreen_printenv(char *prefix,
154 char *name, char *altname,
155 char *suffix)
156{
157 char *envval = env_get(name);
158 if (0 != envval) {
159 lcd_printf("%s %s %s", prefix, envval, suffix);
160 } else if (0 != altname) {
161 envval = env_get(altname);
162 if (0 != envval)
163 lcd_printf("%s %s %s", prefix, envval, suffix);
164 } else {
165 lcd_printf("\n");
166 }
167}
168
169void br_summaryscreen(void)
170{
171 br_summaryscreen_printenv(" - B&R -", "br_orderno", 0, "-\n");
172 br_summaryscreen_printenv(" Serial/Rev :", "br_serial", 0, "\n");
173 br_summaryscreen_printenv(" MAC1 :", "br_mac1", "ethaddr", "\n");
174 br_summaryscreen_printenv(" MAC2 :", "br_mac2", 0, "\n");
175 lcd_puts(" Bootloader : " PLAIN_VERSION "\n");
176 lcd_puts("\n");
177}
178
179void lcdpower(int on)
180{
181 u32 pin, swval, i;
182 char buf[16] = { 0 };
183
184 pin = env_get_ulong("ds1_pwr", 16, ~0UL);
185
186 if (pin == ~0UL) {
187 puts("no pwrpin in dtb/env, cannot powerup display!\n");
188 return;
189 }
190
191 for (i = 0; i < 3; i++) {
192 if (pin != 0) {
193 snprintf(buf, sizeof(buf), "ds1_pwr#%d", i);
194 if (gpio_request(pin & 0x7F, buf) != 0) {
195 printf("%s: not able to request gpio %s",
196 __func__, buf);
197 continue;
198 }
199 swval = pin & 0x80 ? 0 : 1;
200 if (on)
201 gpio_direction_output(pin & 0x7F, swval);
202 else
203 gpio_direction_output(pin & 0x7F, !swval);
204
205 debug("switched pin %d to %d\n", pin & 0x7F, swval);
206 }
207 pin >>= 8;
208 }
209}
210
211vidinfo_t panel_info = {
212 .vl_col = 1366,
213
214
215
216 .vl_row = 768,
217 .vl_bpix = 5,
218 .priv = 0
219};
220
221void lcd_ctrl_init(void *lcdbase)
222{
223 struct am335x_lcdpanel lcd_panel;
224
225 memset(&lcd_panel, 0, sizeof(struct am335x_lcdpanel));
226 if (load_lcdtiming(&lcd_panel) != 0)
227 return;
228
229 lcd_panel.panel_power_ctrl = &lcdpower;
230
231 if (0 != am335xfb_init(&lcd_panel))
232 printf("ERROR: failed to initialize video!");
233
234
235
236
237 panel_info.vl_col = lcd_panel.hactive;
238 panel_info.vl_row = lcd_panel.vactive;
239
240 lcd_set_flush_dcache(1);
241}
242
243void lcd_enable(void)
244{
245 br_summaryscreen();
246 lcdbacklight(1);
247}
248#endif
249
250int ft_board_setup(void *blob, struct bd_info *bd)
251{
252 int nodeoffset;
253
254 nodeoffset = fdt_path_offset(blob, "/factory-settings");
255 if (nodeoffset < 0) {
256 printf("%s: cannot find /factory-settings, trying /fset\n",
257 __func__);
258 nodeoffset = fdt_path_offset(blob, "/fset");
259 if (nodeoffset < 0) {
260 printf("%s: cannot find /fset.\n", __func__);
261 return 0;
262 }
263 }
264
265 if (fdt_setprop(blob, nodeoffset, "bl-version",
266 PLAIN_VERSION, strlen(PLAIN_VERSION)) != 0) {
267 printf("%s: no 'bl-version' prop in fdt!\n", __func__);
268 return 0;
269 }
270 return 0;
271}
272
273int brdefaultip_setup(int bus, int chip)
274{
275 int rc;
276 struct udevice *i2cdev;
277 u8 u8buf = 0;
278 char defip[256] = { 0 };
279
280 rc = i2c_get_chip_for_busnum(bus, chip, 2, &i2cdev);
281 if (rc != 0) {
282 printf("WARN: cannot probe baseboard EEPROM!\n");
283 return -1;
284 }
285
286 rc = dm_i2c_read(i2cdev, 0, &u8buf, 1);
287 if (rc != 0) {
288 printf("WARN: cannot read baseboard EEPROM!\n");
289 return -1;
290 }
291
292 if (u8buf != 0xFF)
293 snprintf(defip, sizeof(defip),
294 "if test -r ${ipaddr}; then; else setenv ipaddr 192.168.60.%d; setenv serverip 192.168.60.254; setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;",
295 u8buf);
296 else
297 strncpy(defip,
298 "if test -r ${ipaddr}; then; else setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254; setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;",
299 sizeof(defip));
300
301 env_set("brdefaultip", defip);
302 env_set_hex("board_id", u8buf);
303
304 return 0;
305}
306
307int overwrite_console(void)
308{
309 return 1;
310}
311
312#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_AM33XX)
313#include <asm/arch/hardware.h>
314#include <asm/arch/omap.h>
315#include <asm/arch/clock.h>
316#include <asm/arch/sys_proto.h>
317#include <power/tps65217.h>
318
319static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
320
321void pmicsetup(u32 mpupll, unsigned int bus)
322{
323 int mpu_vdd;
324 int usb_cur_lim;
325
326 if (power_tps65217_init(bus)) {
327 printf("WARN: cannot setup PMIC 0x24 @ bus #%d, not found!.\n",
328 bus);
329 return;
330 }
331
332
333 dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
334 printf("detected max. frequency: %d - ", dpll_mpu_opp100.m);
335
336 if (0 != mpupll) {
337 dpll_mpu_opp100.m = mpupll;
338 printf("retuning MPU-PLL to: %d MHz.\n", dpll_mpu_opp100.m);
339 } else {
340 puts("ok.\n");
341 }
342
343
344
345
346 if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
347 usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
348 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
349 } else {
350 usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
351 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
352 }
353
354 if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_POWER_PATH,
355 usb_cur_lim, TPS65217_USB_INPUT_CUR_LIMIT_MASK))
356 puts("tps65217_reg_write failure\n");
357
358
359 if (tps65217_voltage_update(TPS65217_DEFDCDC3,
360 TPS65217_DCDC_VOLT_SEL_1125MV)) {
361 puts("tps65217_voltage_update failure\n");
362 return;
363 }
364
365
366 do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
367
368
369 if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
370 puts("tps65217_voltage_update failure\n");
371 return;
372 }
373
374
375 if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
376 TPS65217_DEFLS1,
377 TPS65217_LDO_VOLTAGE_OUT_1_8,
378 TPS65217_LDO_MASK))
379 puts("tps65217_reg_write failure\n");
380
381 if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
382 TPS65217_DEFLS2,
383 TPS65217_LDO_VOLTAGE_OUT_3_3,
384 TPS65217_LDO_MASK))
385 puts("tps65217_reg_write failure\n");
386
387
388 do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
389
390 tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
391 TPS65217_STATUS, TPS65217_PWR_OFF, TPS65217_PWR_OFF);
392}
393
394void set_uart_mux_conf(void)
395{
396 enable_uart0_pin_mux();
397}
398
399void set_mux_conf_regs(void)
400{
401 enable_board_pin_mux();
402}
403
404#endif
405