1
2
3
4
5
6
7
8#include <common.h>
9#include <lcd.h>
10#include <log.h>
11#include <asm/gpio.h>
12#include <asm/arch/pinmux.h>
13#include <asm/arch/power.h>
14#include <asm/arch/mipi_dsim.h>
15#include <linux/delay.h>
16#include <power/pmic.h>
17#include <power/max77686_pmic.h>
18#include <power/battery.h>
19#include <power/max77693_pmic.h>
20#include <power/max77693_muic.h>
21#include <power/max77693_fg.h>
22#include <libtizen.h>
23#include <errno.h>
24#include <usb.h>
25#include <usb/dwc2_udc.h>
26#include <usb_mass_storage.h>
27
28static unsigned int board_rev = -1;
29
30static inline u32 get_model_rev(void);
31
32static void check_hw_revision(void)
33{
34 int modelrev = 0;
35 char str[12];
36 int i;
37
38
39
40
41
42
43
44 for (i = 0; i < 2; i++) {
45 int pin = i + EXYNOS4X12_GPIO_M10;
46
47 sprintf(str, "model_rev%d", i);
48 gpio_request(pin, str);
49 gpio_cfg_pin(pin, S5P_GPIO_INPUT);
50 }
51
52
53 for (i = 0; i < 4; i++) {
54 int pin = i + EXYNOS4X12_GPIO_M12;
55
56 sprintf(str, "hw_rev%d", i);
57 gpio_request(pin, str);
58 gpio_cfg_pin(pin, S5P_GPIO_INPUT);
59 gpio_set_pull(pin, S5P_GPIO_PULL_NONE);
60 }
61
62
63 for (i = 0; i < 2; i++)
64 modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i);
65
66
67 board_rev = modelrev << 8;
68}
69
70u32 get_board_rev(void)
71{
72 return board_rev;
73}
74
75static inline u32 get_model_rev(void)
76{
77 return (board_rev >> 8) & 0xff;
78}
79
80static void board_external_gpio_init(void)
81{
82
83
84
85
86
87
88 gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE);
89 gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE);
90 gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE);
91 gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE);
92 gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE);
93 gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE);
94 gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE);
95 gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE);
96 gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE);
97 gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE);
98 gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE);
99 gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE);
100}
101
102int exynos_early_init_f(void)
103{
104 board_external_gpio_init();
105
106 return 0;
107}
108
109int exynos_init(void)
110{
111 struct exynos4_power *pwr =
112 (struct exynos4_power *)samsung_get_base_power();
113
114 check_hw_revision();
115 printf("HW Revision:\t0x%04x\n", board_rev);
116
117
118
119
120
121
122
123
124 writel(0, &pwr->inform4);
125 writel(0, &pwr->inform5);
126
127 return 0;
128}
129
130int exynos_power_init(void)
131{
132#if !CONFIG_IS_ENABLED(DM_I2C)
133 int chrg;
134 struct power_battery *pb;
135 struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
136
137 pmic_init_max77693(I2C_10);
138 power_muic_init(I2C_10);
139 power_fg_init(I2C_9);
140 power_bat_init(0);
141
142 p_chrg = pmic_get("MAX77693_PMIC");
143 if (!p_chrg) {
144 puts("MAX77693_PMIC: Not found\n");
145 return -ENODEV;
146 }
147
148 p_muic = pmic_get("MAX77693_MUIC");
149 if (!p_muic) {
150 puts("MAX77693_MUIC: Not found\n");
151 return -ENODEV;
152 }
153
154 p_fg = pmic_get("MAX77693_FG");
155 if (!p_fg) {
156 puts("MAX17042_FG: Not found\n");
157 return -ENODEV;
158 }
159
160 if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0)
161 puts("No battery detected\n");
162
163 p_bat = pmic_get("BAT_TRATS2");
164 if (!p_bat) {
165 puts("BAT_TRATS2: Not found\n");
166 return -ENODEV;
167 }
168
169 p_fg->parent = p_bat;
170 p_chrg->parent = p_bat;
171 p_muic->parent = p_bat;
172
173 p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
174
175 pb = p_bat->pbat;
176 chrg = p_muic->chrg->chrg_type(p_muic);
177 debug("CHARGER TYPE: %d\n", chrg);
178
179 if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
180 puts("No battery detected\n");
181 return 0;
182 }
183
184 p_fg->fg->fg_battery_check(p_fg, p_bat);
185
186 if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
187 puts("CHARGE Battery !\n");
188#endif
189 return 0;
190}
191
192#ifdef CONFIG_USB_GADGET
193static int s5pc210_phy_control(int on)
194{
195#if !CONFIG_IS_ENABLED(DM_I2C)
196 int ret = 0;
197 unsigned int val;
198 struct pmic *p, *p_pmic, *p_muic;
199
200 p_pmic = pmic_get("MAX77686_PMIC");
201 if (!p_pmic)
202 return -ENODEV;
203
204 if (pmic_probe(p_pmic))
205 return -1;
206
207 p_muic = pmic_get("MAX77693_MUIC");
208 if (!p_muic)
209 return -ENODEV;
210
211 if (pmic_probe(p_muic))
212 return -1;
213
214 if (on) {
215 ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
216 if (ret)
217 return -1;
218
219 p = pmic_get("MAX77693_PMIC");
220 if (!p)
221 return -ENODEV;
222
223 if (pmic_probe(p))
224 return -1;
225
226
227 ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
228 if (ret)
229 return -1;
230
231 val |= MAX77693_ENSAFEOUT1;
232 ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
233 if (ret)
234 return -1;
235
236
237 ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
238 MAX77693_MUIC_CTRL1_DN1DP2);
239
240 } else {
241 ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
242 if (ret)
243 return -1;
244
245
246 ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
247 MAX77693_MUIC_CTRL1_UT1UR2);
248 }
249
250 if (ret)
251 return -1;
252#endif
253 return 0;
254}
255
256struct dwc2_plat_otg_data s5pc210_otg_data = {
257 .phy_control = s5pc210_phy_control,
258 .regs_phy = EXYNOS4X12_USBPHY_BASE,
259 .regs_otg = EXYNOS4X12_USBOTG_BASE,
260 .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
261 .usb_flags = PHY0_SLEEP,
262};
263
264int board_usb_init(int index, enum usb_init_type init)
265{
266 debug("USB_udc_probe\n");
267 return dwc2_udc_probe(&s5pc210_otg_data);
268}
269
270int g_dnl_board_usb_cable_connected(void)
271{
272#if !CONFIG_IS_ENABLED(DM_I2C)
273 struct pmic *muic = pmic_get("MAX77693_MUIC");
274 if (!muic)
275 return 0;
276
277 return !!muic->chrg->chrg_type(muic);
278#else
279 return false;
280#endif
281}
282#endif
283
284
285
286
287
288#ifdef CONFIG_LCD
289int mipi_power(void)
290{
291#if !CONFIG_IS_ENABLED(DM_I2C)
292 struct pmic *p = pmic_get("MAX77686_PMIC");
293
294
295 max77686_set_ldo_mode(p, 8, OPMODE_ON);
296
297 max77686_set_ldo_mode(p, 10, OPMODE_ON);
298#endif
299
300 return 0;
301}
302
303void exynos_lcd_power_on(void)
304{
305#if !CONFIG_IS_ENABLED(DM_I2C)
306 struct pmic *p = pmic_get("MAX77686_PMIC");
307
308
309 gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en");
310 gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP);
311 gpio_direction_output(EXYNOS4X12_GPIO_C01, 1);
312
313
314 pmic_probe(p);
315 max77686_set_ldo_voltage(p, 25, 3100000);
316 max77686_set_ldo_mode(p, 25, OPMODE_LPM);
317#endif
318}
319
320void exynos_reset_lcd(void)
321{
322
323 gpio_request(EXYNOS4X12_GPIO_F21, "lcd_reset");
324 gpio_direction_output(EXYNOS4X12_GPIO_F21, 0);
325 udelay(10);
326 gpio_set_value(EXYNOS4X12_GPIO_F21, 1);
327}
328
329void exynos_lcd_misc_init(vidinfo_t *vid)
330{
331#ifdef CONFIG_TIZEN
332 get_tizen_logo_info(vid);
333#endif
334#ifdef CONFIG_S6E8AX0
335 s6e8ax0_init();
336#endif
337}
338#endif
339