LXR uboot/include/configs/lx2160aqds.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright 2018-2020 NXP
   4 */
   5
   6#ifndef __LX2_QDS_H
   7#define __LX2_QDS_H
   8
   9#include "lx2160a_common.h"
  10
  11/* VID */
  12#define CONFIG_VID_FLS_ENV              "lx2160aqds_vdd_mv"
  13#define CONFIG_VID
  14#define CONFIG_VOL_MONITOR_LTC3882_SET
  15#define CONFIG_VOL_MONITOR_LTC3882_READ
  16
  17/* RTC */
  18#define CONFIG_SYS_RTC_BUS_NUM          0
  19
  20/*
  21 * MMC
  22 */
  23#ifdef CONFIG_MMC
  24#ifndef __ASSEMBLY__
  25u8 qixis_esdhc_detect_quirk(void);
  26#endif
  27#define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
  28#endif
  29
  30/* MAC/PHY configuration */
  31#if defined(CONFIG_FSL_MC_ENET)
  32#define CONFIG_MII
  33#define CONFIG_ETHPRIME         "DPMAC17@rgmii-id"
  34#endif
  35
  36/* EEPROM */
  37#define CONFIG_ID_EEPROM
  38#define CONFIG_SYS_I2C_EEPROM_NXID
  39#define CONFIG_SYS_EEPROM_BUS_NUM               0
  40#define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
  41#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
  42#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
  43#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
  44
  45/* Initial environment variables */
  46#define CONFIG_EXTRA_ENV_SETTINGS               \
  47        EXTRA_ENV_SETTINGS                      \
  48        "boot_scripts=lx2160aqds_boot.scr\0"    \
  49        "boot_script_hdr=hdr_lx2160aqds_bs.out\0"       \
  50        "BOARD=lx2160aqds\0"                    \
  51        "xspi_bootcmd=echo Trying load from flexspi..;"         \
  52                "sf probe 0:0 && sf read $load_addr "           \
  53                "$kernel_start $kernel_size ; env exists secureboot &&" \
  54                "sf read $kernelheader_addr_r $kernelheader_start "     \
  55                "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
  56                " bootm $load_addr#$BOARD\0"                    \
  57        "sd_bootcmd=echo Trying load from sd card..;"           \
  58                "mmc dev 0; mmcinfo; mmc read $load_addr "                      \
  59                "$kernel_addr_sd $kernel_size_sd ;"             \
  60                "env exists secureboot && mmc read $kernelheader_addr_r "\
  61                "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  62                " && esbc_validate ${kernelheader_addr_r};"     \
  63                "bootm $load_addr#$BOARD\0"                     \
  64        "sd2_bootcmd=echo Trying load from emmc card..;"        \
  65                "mmc dev 1; mmcinfo; mmc read $load_addr "      \
  66                "$kernel_addr_sd $kernel_size_sd ;"             \
  67                "env exists secureboot && mmc read $kernelheader_addr_r "\
  68                "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
  69                " && esbc_validate ${kernelheader_addr_r};"     \
  70                "bootm $load_addr#$BOARD\0"
  71
  72#include <asm/fsl_secure_boot.h>
  73
  74#endif /* __LX2_QDS_H */
  75