LXR uboot/include/console.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (C) Copyright 2000-2009
   4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5 */
   6
   7#ifndef __CONSOLE_H
   8#define __CONSOLE_H
   9
  10#include <stdbool.h>
  11#include <stdio_dev.h>
  12#include <linux/errno.h>
  13
  14extern char console_buffer[];
  15
  16/* common/console.c */
  17int console_init_f(void);       /* Before relocation; uses the serial  stuff */
  18int console_init_r(void);       /* After  relocation; uses the console stuff */
  19int console_start(int file, struct stdio_dev *sdev);    /* Start a console device */
  20void console_stop(int file, struct stdio_dev *sdev);    /* Stop a console device */
  21int console_assign(int file, const char *devname);      /* Assign the console */
  22int ctrlc(void);
  23int had_ctrlc(void);    /* have we had a Control-C since last clear? */
  24void clear_ctrlc(void); /* clear the Control-C condition */
  25int disable_ctrlc(int); /* 1 to disable, 0 to enable Control-C detect */
  26int confirm_yesno(void);        /*  1 if input is "y", "Y", "yes" or "YES" */
  27
  28/**
  29 * console_search_dev() - search for stdio device with given flags and name
  30 * @flags: device flags as per input/output/system
  31 * @name: device name
  32 *
  33 * Iterates over registered STDIO devices and match them with given @flags
  34 * and @name.
  35 *
  36 * @return pointer to the &struct stdio_dev if found, or NULL otherwise
  37 */
  38struct stdio_dev *console_search_dev(int flags, const char *name);
  39
  40#ifdef CONFIG_CONSOLE_RECORD
  41/**
  42 * console_record_init() - set up the console recording buffers
  43 *
  44 * This should be called as soon as malloc() is available so that the maximum
  45 * amount of console output can be recorded.
  46 *
  47 * @return 0 if OK, -ENOMEM if out of memory
  48 */
  49int console_record_init(void);
  50
  51/**
  52 * console_record_reset() - reset the console recording buffers
  53 *
  54 * Removes any data in the buffers
  55 */
  56void console_record_reset(void);
  57
  58/**
  59 * console_record_reset_enable() - reset and enable the console buffers
  60 *
  61 * This should be called to enable the console buffer.
  62 *
  63 * @return 0 (always)
  64 */
  65int console_record_reset_enable(void);
  66
  67/**
  68 * console_record_readline() - Read a line from the console output
  69 *
  70 * This reads the next available line from the console output previously
  71 * recorded.
  72 *
  73 * @str: Place to put string
  74 * @maxlen: Maximum length of @str including nul terminator
  75 * @return length of string returned
  76 */
  77int console_record_readline(char *str, int maxlen);
  78
  79/**
  80 * console_record_avail() - Get the number of available bytes in console output
  81 *
  82 * @return available bytes (0 if empty)
  83 */
  84int console_record_avail(void);
  85#else
  86static inline int console_record_init(void)
  87{
  88        /* Always succeed, since it is not enabled */
  89
  90        return 0;
  91}
  92
  93static inline void console_record_reset(void)
  94{
  95        /* Nothing to do here */
  96}
  97
  98static inline int console_record_reset_enable(void)
  99{
 100        /* Cannot enable it as it is not supported */
 101        return -ENOSYS;
 102}
 103
 104static inline int console_record_readline(char *str, int maxlen)
 105{
 106        /* Nothing to read */
 107        return 0;
 108}
 109
 110static inline int console_record_avail(void)
 111{
 112        /* There is never anything available */
 113        return 0;
 114}
 115
 116#endif /* !CONFIG_CONSOLE_RECORD */
 117
 118/**
 119 * console_announce_r() - print a U-Boot console on non-serial consoles
 120 *
 121 * When U-Boot starts up with a display it generally does not announce itself
 122 * on the display. The banner is instead emitted on the UART before relocation.
 123 * This function prints a banner on devices which (we assume) did not receive
 124 * it before relocation.
 125 *
 126 * @return 0 (meaning no errors)
 127 */
 128int console_announce_r(void);
 129
 130/**
 131 * console_puts_select_stderr() - Output a string to selected console devices
 132 *
 133 * This writes to stderr only. It is useful for outputting errors
 134 *
 135 * @serial_only: true to output only to serial, false to output to everything
 136 *      else
 137 * @s: String to output
 138 */
 139void console_puts_select_stderr(bool serial_only, const char *s);
 140
 141/*
 142 * CONSOLE multiplexing.
 143 */
 144#ifdef CONFIG_CONSOLE_MUX
 145#include <iomux.h>
 146#endif
 147
 148#endif
 149