LXR uboot/board/freescale/ls1046ardb/cpld.c

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright 2016 Freescale Semiconductor
   4 *
   5 * Freescale LS1046ARDB board-specific CPLD controlling supports.
   6 */
   7
   8#include <common.h>
   9#include <command.h>
  10#include <asm/io.h>
  11#include "cpld.h"
  12
  13u8 cpld_read(unsigned int reg)
  14{
  15        void *p = (void *)CONFIG_SYS_CPLD_BASE;
  16
  17        return in_8(p + reg);
  18}
  19
  20void cpld_write(unsigned int reg, u8 value)
  21{
  22        void *p = (void *)CONFIG_SYS_CPLD_BASE;
  23
  24        out_8(p + reg, value);
  25}
  26
  27/* Set the boot bank to the alternate bank */
  28void cpld_set_altbank(void)
  29{
  30        u16 reg = CPLD_CFG_RCW_SRC_QSPI;
  31        u8 reg4 = CPLD_READ(soft_mux_on);
  32        u8 reg5 = (u8)(reg >> 1);
  33        u8 reg6 = (u8)(reg & 1);
  34        u8 reg7 = CPLD_READ(vbank);
  35
  36        cpld_rev_bit(&reg5);
  37
  38        CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
  39
  40        CPLD_WRITE(cfg_rcw_src1, reg5);
  41        CPLD_WRITE(cfg_rcw_src2, reg6);
  42
  43        reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
  44        CPLD_WRITE(vbank, reg7);
  45
  46        CPLD_WRITE(system_rst, 1);
  47}
  48
  49/* Set the boot bank to the default bank */
  50void cpld_set_defbank(void)
  51{
  52        u16 reg = CPLD_CFG_RCW_SRC_QSPI;
  53        u8 reg4 = CPLD_READ(soft_mux_on);
  54        u8 reg5 = (u8)(reg >> 1);
  55        u8 reg6 = (u8)(reg & 1);
  56
  57        cpld_rev_bit(&reg5);
  58
  59        CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
  60
  61        CPLD_WRITE(cfg_rcw_src1, reg5);
  62        CPLD_WRITE(cfg_rcw_src2, reg6);
  63
  64        CPLD_WRITE(vbank, 0);
  65
  66        CPLD_WRITE(system_rst, 1);
  67}
  68
  69void cpld_set_sd(void)
  70{
  71        u16 reg = CPLD_CFG_RCW_SRC_SD;
  72        u8 reg5 = (u8)(reg >> 1);
  73        u8 reg6 = (u8)(reg & 1);
  74
  75        cpld_rev_bit(&reg5);
  76
  77        CPLD_WRITE(soft_mux_on, 1);
  78
  79        CPLD_WRITE(cfg_rcw_src1, reg5);
  80        CPLD_WRITE(cfg_rcw_src2, reg6);
  81
  82        CPLD_WRITE(system_rst, 1);
  83}
  84
  85void cpld_select_core_volt(bool en_0v9)
  86{
  87        u8 reg17 = en_0v9;
  88
  89        CPLD_WRITE(vdd_en, 1);
  90        CPLD_WRITE(vdd_sel, reg17);
  91}
  92
  93#ifdef DEBUG
  94static void cpld_dump_regs(void)
  95{
  96        printf("cpld_ver        = %x\n", CPLD_READ(cpld_ver));
  97        printf("cpld_ver_sub    = %x\n", CPLD_READ(cpld_ver_sub));
  98        printf("pcba_ver        = %x\n", CPLD_READ(pcba_ver));
  99        printf("soft_mux_on     = %x\n", CPLD_READ(soft_mux_on));
 100        printf("cfg_rcw_src1    = %x\n", CPLD_READ(cfg_rcw_src1));
 101        printf("cfg_rcw_src2    = %x\n", CPLD_READ(cfg_rcw_src2));
 102        printf("vbank           = %x\n", CPLD_READ(vbank));
 103        printf("sysclk_sel      = %x\n", CPLD_READ(sysclk_sel));
 104        printf("uart_sel        = %x\n", CPLD_READ(uart_sel));
 105        printf("sd1refclk_sel   = %x\n", CPLD_READ(sd1refclk_sel));
 106        printf("rgmii_1588_sel  = %x\n", CPLD_READ(rgmii_1588_sel));
 107        printf("1588_clk_sel    = %x\n", CPLD_READ(reg_1588_clk_sel));
 108        printf("status_led      = %x\n", CPLD_READ(status_led));
 109        printf("sd_emmc         = %x\n", CPLD_READ(sd_emmc));
 110        printf("vdd_en          = %x\n", CPLD_READ(vdd_en));
 111        printf("vdd_sel         = %x\n", CPLD_READ(vdd_sel));
 112        putc('\n');
 113}
 114#endif
 115
 116void cpld_rev_bit(unsigned char *value)
 117{
 118        u8 rev_val, val;
 119        int i;
 120
 121        val = *value;
 122        rev_val = val & 1;
 123        for (i = 1; i <= 7; i++) {
 124                val >>= 1;
 125                rev_val <<= 1;
 126                rev_val |= val & 1;
 127        }
 128
 129        *value = rev_val;
 130}
 131
 132int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 133{
 134        int rc = 0;
 135
 136        if (argc <= 1)
 137                return cmd_usage(cmdtp);
 138
 139        if (strcmp(argv[1], "reset") == 0) {
 140                if (strcmp(argv[2], "altbank") == 0)
 141                        cpld_set_altbank();
 142                else if (strcmp(argv[2], "sd") == 0)
 143                        cpld_set_sd();
 144                else
 145                        cpld_set_defbank();
 146#ifdef DEBUG
 147        } else if (strcmp(argv[1], "dump") == 0) {
 148                cpld_dump_regs();
 149#endif
 150        } else {
 151                rc = cmd_usage(cmdtp);
 152        }
 153
 154        return rc;
 155}
 156
 157U_BOOT_CMD(
 158        cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
 159        "Reset the board or alternate bank",
 160        "reset: reset to default bank\n"
 161        "cpld reset altbank: reset to alternate bank\n"
 162        "cpld reset sd: reset to boot from SD card\n"
 163#ifdef DEBUG
 164        "cpld dump - display the CPLD registers\n"
 165#endif
 166);
 167