uboot/cmd/ubi.c
<<
>>
Prefs
   1/*
   2 * Unsorted Block Image commands
   3 *
   4 *  Copyright (C) 2008 Samsung Electronics
   5 *  Kyungmin Park <kyungmin.park@samsung.com>
   6 *
   7 * Copyright 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 */
  13
  14#include <common.h>
  15#include <command.h>
  16#include <env.h>
  17#include <exports.h>
  18#include <malloc.h>
  19#include <memalign.h>
  20#include <mtd.h>
  21#include <nand.h>
  22#include <onenand_uboot.h>
  23#include <dm/devres.h>
  24#include <linux/mtd/mtd.h>
  25#include <linux/mtd/partitions.h>
  26#include <linux/err.h>
  27#include <ubi_uboot.h>
  28#include <linux/errno.h>
  29#include <jffs2/load_kernel.h>
  30
  31#undef ubi_msg
  32#define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
  33
  34/* Private own data */
  35static struct ubi_device *ubi;
  36
  37#ifdef CONFIG_CMD_UBIFS
  38#include <ubifs_uboot.h>
  39#endif
  40
  41static void display_volume_info(struct ubi_device *ubi)
  42{
  43        int i;
  44
  45        for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
  46                if (!ubi->volumes[i])
  47                        continue;       /* Empty record */
  48                ubi_dump_vol_info(ubi->volumes[i]);
  49        }
  50}
  51
  52static void display_ubi_info(struct ubi_device *ubi)
  53{
  54        ubi_msg("MTD device name:            \"%s\"", ubi->mtd->name);
  55        ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
  56        ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
  57                        ubi->peb_size, ubi->peb_size >> 10);
  58        ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
  59        ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
  60        ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
  61        ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
  62        ubi_msg("VID header offset:          %d (aligned %d)",
  63                        ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
  64        ubi_msg("data offset:                %d", ubi->leb_start);
  65        ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
  66        ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
  67        ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
  68        ubi_msg("number of user volumes:     %d",
  69                        ubi->vol_count - UBI_INT_VOL_COUNT);
  70        ubi_msg("available PEBs:             %d", ubi->avail_pebs);
  71        ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
  72        ubi_msg("number of PEBs reserved for bad PEB handling: %d",
  73                        ubi->beb_rsvd_pebs);
  74        ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
  75}
  76
  77static int ubi_info(int layout)
  78{
  79        if (layout)
  80                display_volume_info(ubi);
  81        else
  82                display_ubi_info(ubi);
  83
  84        return 0;
  85}
  86
  87static int ubi_check_volumename(const struct ubi_volume *vol, char *name)
  88{
  89        return strcmp(vol->name, name);
  90}
  91
  92static int ubi_check(char *name)
  93{
  94        int i;
  95
  96        for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
  97                if (!ubi->volumes[i])
  98                        continue;       /* Empty record */
  99
 100                if (!ubi_check_volumename(ubi->volumes[i], name))
 101                        return 0;
 102        }
 103
 104        return 1;
 105}
 106
 107static int verify_mkvol_req(const struct ubi_device *ubi,
 108                            const struct ubi_mkvol_req *req)
 109{
 110        int n, err = EINVAL;
 111
 112        if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
 113            req->name_len < 0)
 114                goto bad;
 115
 116        if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
 117            req->vol_id != UBI_VOL_NUM_AUTO)
 118                goto bad;
 119
 120        if (req->alignment == 0)
 121                goto bad;
 122
 123        if (req->bytes == 0) {
 124                printf("No space left in UBI device!\n");
 125                err = ENOMEM;
 126                goto bad;
 127        }
 128
 129        if (req->vol_type != UBI_DYNAMIC_VOLUME &&
 130            req->vol_type != UBI_STATIC_VOLUME)
 131                goto bad;
 132
 133        if (req->alignment > ubi->leb_size)
 134                goto bad;
 135
 136        n = req->alignment % ubi->min_io_size;
 137        if (req->alignment != 1 && n)
 138                goto bad;
 139
 140        if (req->name_len > UBI_VOL_NAME_MAX) {
 141                printf("Name too long!\n");
 142                err = ENAMETOOLONG;
 143                goto bad;
 144        }
 145
 146        return 0;
 147bad:
 148        return err;
 149}
 150
 151static int ubi_create_vol(char *volume, int64_t size, int dynamic, int vol_id,
 152                          bool skipcheck)
 153{
 154        struct ubi_mkvol_req req;
 155        int err;
 156
 157        if (dynamic)
 158                req.vol_type = UBI_DYNAMIC_VOLUME;
 159        else
 160                req.vol_type = UBI_STATIC_VOLUME;
 161
 162        req.vol_id = vol_id;
 163        req.alignment = 1;
 164        req.bytes = size;
 165
 166        strcpy(req.name, volume);
 167        req.name_len = strlen(volume);
 168        req.name[req.name_len] = '\0';
 169        req.flags = 0;
 170        if (skipcheck)
 171                req.flags |= UBI_VOL_SKIP_CRC_CHECK_FLG;
 172
 173        /* It's duplicated at drivers/mtd/ubi/cdev.c */
 174        err = verify_mkvol_req(ubi, &req);
 175        if (err) {
 176                printf("verify_mkvol_req failed %d\n", err);
 177                return err;
 178        }
 179        printf("Creating %s volume %s of size %lld\n",
 180                dynamic ? "dynamic" : "static", volume, size);
 181        /* Call real ubi create volume */
 182        return ubi_create_volume(ubi, &req);
 183}
 184
 185static struct ubi_volume *ubi_find_volume(char *volume)
 186{
 187        struct ubi_volume *vol = NULL;
 188        int i;
 189
 190        for (i = 0; i < ubi->vtbl_slots; i++) {
 191                vol = ubi->volumes[i];
 192                if (vol && !strcmp(vol->name, volume))
 193                        return vol;
 194        }
 195
 196        printf("Volume %s not found!\n", volume);
 197        return NULL;
 198}
 199
 200static int ubi_remove_vol(char *volume)
 201{
 202        int err, reserved_pebs, i;
 203        struct ubi_volume *vol;
 204
 205        vol = ubi_find_volume(volume);
 206        if (vol == NULL)
 207                return ENODEV;
 208
 209        printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
 210
 211        if (ubi->ro_mode) {
 212                printf("It's read-only mode\n");
 213                err = EROFS;
 214                goto out_err;
 215        }
 216
 217        err = ubi_change_vtbl_record(ubi, vol->vol_id, NULL);
 218        if (err) {
 219                printf("Error changing Vol tabel record err=%x\n", err);
 220                goto out_err;
 221        }
 222        reserved_pebs = vol->reserved_pebs;
 223        for (i = 0; i < vol->reserved_pebs; i++) {
 224                err = ubi_eba_unmap_leb(ubi, vol, i);
 225                if (err)
 226                        goto out_err;
 227        }
 228
 229        kfree(vol->eba_tbl);
 230        ubi->volumes[vol->vol_id]->eba_tbl = NULL;
 231        ubi->volumes[vol->vol_id] = NULL;
 232
 233        ubi->rsvd_pebs -= reserved_pebs;
 234        ubi->avail_pebs += reserved_pebs;
 235        i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
 236        if (i > 0) {
 237                i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
 238                ubi->avail_pebs -= i;
 239                ubi->rsvd_pebs += i;
 240                ubi->beb_rsvd_pebs += i;
 241                if (i > 0)
 242                        ubi_msg("reserve more %d PEBs", i);
 243        }
 244        ubi->vol_count -= 1;
 245
 246        return 0;
 247out_err:
 248        ubi_err(ubi, "cannot remove volume %s, error %d", volume, err);
 249        if (err < 0)
 250                err = -err;
 251        return err;
 252}
 253
 254static int ubi_rename_vol(char *oldname, char *newname)
 255{
 256        struct ubi_volume *vol;
 257        struct ubi_rename_entry rename;
 258        struct ubi_volume_desc desc;
 259        struct list_head list;
 260
 261        vol = ubi_find_volume(oldname);
 262        if (!vol) {
 263                printf("%s: volume %s doesn't exist\n", __func__, oldname);
 264                return ENODEV;
 265        }
 266
 267        if (!ubi_check(newname)) {
 268                printf("%s: volume %s already exist\n", __func__, newname);
 269                return EINVAL;
 270        }
 271
 272        printf("Rename UBI volume %s to %s\n", oldname, newname);
 273
 274        if (ubi->ro_mode) {
 275                printf("%s: ubi device is in read-only mode\n", __func__);
 276                return EROFS;
 277        }
 278
 279        rename.new_name_len = strlen(newname);
 280        strcpy(rename.new_name, newname);
 281        rename.remove = 0;
 282        desc.vol = vol;
 283        desc.mode = 0;
 284        rename.desc = &desc;
 285        INIT_LIST_HEAD(&rename.list);
 286        INIT_LIST_HEAD(&list);
 287        list_add(&rename.list, &list);
 288
 289        return ubi_rename_volumes(ubi, &list);
 290}
 291
 292static int ubi_volume_continue_write(char *volume, void *buf, size_t size)
 293{
 294        int err = 1;
 295        struct ubi_volume *vol;
 296
 297        vol = ubi_find_volume(volume);
 298        if (vol == NULL)
 299                return ENODEV;
 300
 301        err = ubi_more_update_data(ubi, vol, buf, size);
 302        if (err < 0) {
 303                printf("Couldnt or partially wrote data\n");
 304                return -err;
 305        }
 306
 307        if (err) {
 308                size = err;
 309
 310                err = ubi_check_volume(ubi, vol->vol_id);
 311                if (err < 0)
 312                        return -err;
 313
 314                if (err) {
 315                        ubi_warn(ubi, "volume %d on UBI device %d is corrupt",
 316                                 vol->vol_id, ubi->ubi_num);
 317                        vol->corrupted = 1;
 318                }
 319
 320                vol->checked = 1;
 321                ubi_gluebi_updated(vol);
 322        }
 323
 324        return 0;
 325}
 326
 327int ubi_volume_begin_write(char *volume, void *buf, size_t size,
 328        size_t full_size)
 329{
 330        int err = 1;
 331        int rsvd_bytes = 0;
 332        struct ubi_volume *vol;
 333
 334        vol = ubi_find_volume(volume);
 335        if (vol == NULL)
 336                return ENODEV;
 337
 338        rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad);
 339        if (size > rsvd_bytes) {
 340                printf("size > volume size! Aborting!\n");
 341                return EINVAL;
 342        }
 343
 344        err = ubi_start_update(ubi, vol, full_size);
 345        if (err < 0) {
 346                printf("Cannot start volume update\n");
 347                return -err;
 348        }
 349
 350        return ubi_volume_continue_write(volume, buf, size);
 351}
 352
 353int ubi_volume_write(char *volume, void *buf, size_t size)
 354{
 355        return ubi_volume_begin_write(volume, buf, size, size);
 356}
 357
 358int ubi_volume_read(char *volume, char *buf, size_t size)
 359{
 360        int err, lnum, off, len, tbuf_size;
 361        void *tbuf;
 362        unsigned long long tmp;
 363        struct ubi_volume *vol;
 364        loff_t offp = 0;
 365        size_t len_read;
 366
 367        vol = ubi_find_volume(volume);
 368        if (vol == NULL)
 369                return ENODEV;
 370
 371        if (vol->updating) {
 372                printf("updating");
 373                return EBUSY;
 374        }
 375        if (vol->upd_marker) {
 376                printf("damaged volume, update marker is set");
 377                return EBADF;
 378        }
 379        if (offp == vol->used_bytes)
 380                return 0;
 381
 382        if (size == 0) {
 383                printf("No size specified -> Using max size (%lld)\n", vol->used_bytes);
 384                size = vol->used_bytes;
 385        }
 386
 387        printf("Read %zu bytes from volume %s to %p\n", size, volume, buf);
 388
 389        if (vol->corrupted)
 390                printf("read from corrupted volume %d", vol->vol_id);
 391        if (offp + size > vol->used_bytes)
 392                size = vol->used_bytes - offp;
 393
 394        tbuf_size = vol->usable_leb_size;
 395        if (size < tbuf_size)
 396                tbuf_size = ALIGN(size, ubi->min_io_size);
 397        tbuf = malloc_cache_aligned(tbuf_size);
 398        if (!tbuf) {
 399                printf("NO MEM\n");
 400                return ENOMEM;
 401        }
 402        len = size > tbuf_size ? tbuf_size : size;
 403
 404        tmp = offp;
 405        off = do_div(tmp, vol->usable_leb_size);
 406        lnum = tmp;
 407        len_read = size;
 408        do {
 409                if (off + len >= vol->usable_leb_size)
 410                        len = vol->usable_leb_size - off;
 411
 412                err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0);
 413                if (err) {
 414                        printf("read err %x\n", err);
 415                        err = -err;
 416                        break;
 417                }
 418                off += len;
 419                if (off == vol->usable_leb_size) {
 420                        lnum += 1;
 421                        off -= vol->usable_leb_size;
 422                }
 423
 424                size -= len;
 425                offp += len;
 426
 427                memcpy(buf, tbuf, len);
 428
 429                buf += len;
 430                len = size > tbuf_size ? tbuf_size : size;
 431        } while (size);
 432
 433        if (!size)
 434                env_set_hex("filesize", len_read);
 435
 436        free(tbuf);
 437        return err;
 438}
 439
 440static int ubi_dev_scan(struct mtd_info *info, const char *vid_header_offset)
 441{
 442        char ubi_mtd_param_buffer[80];
 443        int err;
 444
 445        if (!vid_header_offset)
 446                sprintf(ubi_mtd_param_buffer, "%s", info->name);
 447        else
 448                sprintf(ubi_mtd_param_buffer, "%s,%s", info->name,
 449                        vid_header_offset);
 450
 451        err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
 452        if (err)
 453                return -err;
 454
 455        err = ubi_init();
 456        if (err)
 457                return -err;
 458
 459        return 0;
 460}
 461
 462static int ubi_set_skip_check(char *volume, bool skip_check)
 463{
 464        struct ubi_vtbl_record vtbl_rec;
 465        struct ubi_volume *vol;
 466
 467        vol = ubi_find_volume(volume);
 468        if (!vol)
 469                return ENODEV;
 470
 471        printf("%sing skip_check on volume %s\n",
 472               skip_check ? "Sett" : "Clear", volume);
 473
 474        vtbl_rec = ubi->vtbl[vol->vol_id];
 475        if (skip_check) {
 476                vtbl_rec.flags |= UBI_VTBL_SKIP_CRC_CHECK_FLG;
 477                vol->skip_check = 1;
 478        } else {
 479                vtbl_rec.flags &= ~UBI_VTBL_SKIP_CRC_CHECK_FLG;
 480                vol->skip_check = 0;
 481        }
 482
 483        return ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
 484}
 485
 486static int ubi_detach(void)
 487{
 488#ifdef CONFIG_CMD_UBIFS
 489        /*
 490         * Automatically unmount UBIFS partition when user
 491         * changes the UBI device. Otherwise the following
 492         * UBIFS commands will crash.
 493         */
 494        if (ubifs_is_mounted())
 495                cmd_ubifs_umount();
 496#endif
 497
 498        /*
 499         * Call ubi_exit() before re-initializing the UBI subsystem
 500         */
 501        if (ubi)
 502                ubi_exit();
 503
 504        ubi = NULL;
 505
 506        return 0;
 507}
 508
 509int ubi_part(char *part_name, const char *vid_header_offset)
 510{
 511        struct mtd_info *mtd;
 512        int err = 0;
 513
 514        ubi_detach();
 515
 516        mtd_probe_devices();
 517        mtd = get_mtd_device_nm(part_name);
 518        if (IS_ERR(mtd)) {
 519                printf("Partition %s not found!\n", part_name);
 520                return 1;
 521        }
 522        put_mtd_device(mtd);
 523
 524        err = ubi_dev_scan(mtd, vid_header_offset);
 525        if (err) {
 526                printf("UBI init error %d\n", err);
 527                printf("Please check, if the correct MTD partition is used (size big enough?)\n");
 528                return err;
 529        }
 530
 531        ubi = ubi_devices[0];
 532
 533        return 0;
 534}
 535
 536static int do_ubi(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 537{
 538        int64_t size = 0;
 539        ulong addr = 0;
 540        bool skipcheck = false;
 541
 542        if (argc < 2)
 543                return CMD_RET_USAGE;
 544
 545        if (strcmp(argv[1], "detach") == 0)
 546                return ubi_detach();
 547
 548        if (strcmp(argv[1], "part") == 0) {
 549                const char *vid_header_offset = NULL;
 550
 551                /* Print current partition */
 552                if (argc == 2) {
 553                        if (!ubi) {
 554                                printf("Error, no UBI device selected!\n");
 555                                return 1;
 556                        }
 557
 558                        printf("Device %d: %s, MTD partition %s\n",
 559                               ubi->ubi_num, ubi->ubi_name, ubi->mtd->name);
 560                        return 0;
 561                }
 562
 563                if (argc < 3)
 564                        return CMD_RET_USAGE;
 565
 566                if (argc > 3)
 567                        vid_header_offset = argv[3];
 568
 569                return ubi_part(argv[2], vid_header_offset);
 570        }
 571
 572        if ((strcmp(argv[1], "part") != 0) && !ubi) {
 573                printf("Error, no UBI device selected!\n");
 574                return 1;
 575        }
 576
 577        if (strcmp(argv[1], "info") == 0) {
 578                int layout = 0;
 579                if (argc > 2 && !strncmp(argv[2], "l", 1))
 580                        layout = 1;
 581                return ubi_info(layout);
 582        }
 583
 584        if (strcmp(argv[1], "check") == 0) {
 585                if (argc > 2)
 586                        return ubi_check(argv[2]);
 587
 588                printf("Error, no volume name passed\n");
 589                return 1;
 590        }
 591
 592        if (strncmp(argv[1], "create", 6) == 0) {
 593                int dynamic = 1;        /* default: dynamic volume */
 594                int id = UBI_VOL_NUM_AUTO;
 595
 596                /* Use maximum available size */
 597                size = 0;
 598
 599                /* E.g., create volume with "skipcheck" bit set */
 600                if (argc == 7) {
 601                        skipcheck = strncmp(argv[6], "--skipcheck", 11) == 0;
 602                        argc--;
 603                }
 604
 605                /* E.g., create volume size type vol_id */
 606                if (argc == 6) {
 607                        id = simple_strtoull(argv[5], NULL, 16);
 608                        argc--;
 609                }
 610
 611                /* E.g., create volume size type */
 612                if (argc == 5) {
 613                        if (strncmp(argv[4], "s", 1) == 0)
 614                                dynamic = 0;
 615                        else if (strncmp(argv[4], "d", 1) != 0) {
 616                                printf("Incorrect type\n");
 617                                return 1;
 618                        }
 619                        argc--;
 620                }
 621                /* E.g., create volume size */
 622                if (argc == 4) {
 623                        if (argv[3][0] != '-')
 624                                size = simple_strtoull(argv[3], NULL, 16);
 625                        argc--;
 626                }
 627                /* Use maximum available size */
 628                if (!size) {
 629                        size = (int64_t)ubi->avail_pebs * ubi->leb_size;
 630                        printf("No size specified -> Using max size (%lld)\n", size);
 631                }
 632                /* E.g., create volume */
 633                if (argc == 3) {
 634                        return ubi_create_vol(argv[2], size, dynamic, id,
 635                                              skipcheck);
 636                }
 637        }
 638
 639        if (strncmp(argv[1], "remove", 6) == 0) {
 640                /* E.g., remove volume */
 641                if (argc == 3)
 642                        return ubi_remove_vol(argv[2]);
 643        }
 644
 645        if (IS_ENABLED(CONFIG_CMD_UBI_RENAME) && !strncmp(argv[1], "rename", 6))
 646                return ubi_rename_vol(argv[2], argv[3]);
 647
 648        if (strncmp(argv[1], "skipcheck", 9) == 0) {
 649                /* E.g., change skip_check flag */
 650                if (argc == 4) {
 651                        skipcheck = strncmp(argv[3], "on", 2) == 0;
 652                        return ubi_set_skip_check(argv[2], skipcheck);
 653                }
 654        }
 655
 656        if (strncmp(argv[1], "write", 5) == 0) {
 657                int ret;
 658
 659                if (argc < 5) {
 660                        printf("Please see usage\n");
 661                        return 1;
 662                }
 663
 664                addr = hextoul(argv[2], NULL);
 665                size = hextoul(argv[4], NULL);
 666
 667                if (strlen(argv[1]) == 10 &&
 668                    strncmp(argv[1] + 5, ".part", 5) == 0) {
 669                        if (argc < 6) {
 670                                ret = ubi_volume_continue_write(argv[3],
 671                                                (void *)addr, size);
 672                        } else {
 673                                size_t full_size;
 674                                full_size = hextoul(argv[5], NULL);
 675                                ret = ubi_volume_begin_write(argv[3],
 676                                                (void *)addr, size, full_size);
 677                        }
 678                } else {
 679                        ret = ubi_volume_write(argv[3], (void *)addr, size);
 680                }
 681                if (!ret) {
 682                        printf("%lld bytes written to volume %s\n", size,
 683                               argv[3]);
 684                }
 685
 686                return ret;
 687        }
 688
 689        if (strncmp(argv[1], "read", 4) == 0) {
 690                size = 0;
 691
 692                /* E.g., read volume size */
 693                if (argc == 5) {
 694                        size = hextoul(argv[4], NULL);
 695                        argc--;
 696                }
 697
 698                /* E.g., read volume */
 699                if (argc == 4) {
 700                        addr = hextoul(argv[2], NULL);
 701                        argc--;
 702                }
 703
 704                if (argc == 3) {
 705                        return ubi_volume_read(argv[3], (char *)addr, size);
 706                }
 707        }
 708
 709        printf("Please see usage\n");
 710        return 1;
 711}
 712
 713U_BOOT_CMD(
 714        ubi, 7, 1, do_ubi,
 715        "ubi commands",
 716        "detach"
 717                " - detach ubi from a mtd partition\n"
 718        "ubi part [part] [offset]\n"
 719                " - Show or set current partition (with optional VID"
 720                " header offset)\n"
 721        "ubi info [l[ayout]]"
 722                " - Display volume and ubi layout information\n"
 723        "ubi check volumename"
 724                " - check if volumename exists\n"
 725        "ubi create[vol] volume [size] [type] [id] [--skipcheck]\n"
 726                " - create volume name with size ('-' for maximum"
 727                " available size)\n"
 728        "ubi write[vol] address volume size"
 729                " - Write volume from address with size\n"
 730        "ubi write.part address volume size [fullsize]\n"
 731                " - Write part of a volume from address\n"
 732        "ubi read[vol] address volume [size]"
 733                " - Read volume to address with size\n"
 734        "ubi remove[vol] volume"
 735                " - Remove volume\n"
 736#if IS_ENABLED(CONFIG_CMD_UBI_RENAME)
 737        "ubi rename oldname newname\n"
 738#endif
 739        "ubi skipcheck volume on/off - Set or clear skip_check flag in volume header\n"
 740        "[Legends]\n"
 741        " volume: character name\n"
 742        " size: specified in bytes\n"
 743        " type: s[tatic] or d[ynamic] (default=dynamic)"
 744);
 745