LXR uboot/configs/imx28_xea

   1CONFIG_ARM=y
   2CONFIG_SPL_SYS_THUMB_BUILD=y
   3CONFIG_ARCH_MX28=y
   4CONFIG_SYS_TEXT_BASE=0x40002000
   5CONFIG_SPL_GPIO=y
   6CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8CONFIG_SYS_MALLOC_F_LEN=0x800
   9CONFIG_NR_DRAM_BANKS=1
  10CONFIG_DM_GPIO=y
  11CONFIG_SPL_DM_SPI=y
  12CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
  13CONFIG_SPL_TEXT_BASE=0x1000
  14CONFIG_TARGET_XEA=y
  15CONFIG_SPL_MMC_SUPPORT=y
  16CONFIG_SPL_SERIAL_SUPPORT=y
  17CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
  18CONFIG_SPL=y
  19CONFIG_ENV_OFFSET_REDUND=0x90000
  20CONFIG_SPL_SPI_FLASH_SUPPORT=y
  21CONFIG_SPL_SPI_SUPPORT=y
  22CONFIG_SPL_PAYLOAD="u-boot.img"
  23CONFIG_FIT=y
  24CONFIG_OF_BOARD_SETUP=y
  25CONFIG_USE_BOOTARGS=y
  26CONFIG_BOOTARGS="console=ttyAMA0,115200n8"
  27CONFIG_USE_PREBOOT=y
  28CONFIG_PREBOOT="run prebootcmd"
  29CONFIG_BOARD_EARLY_INIT_F=y
  30CONFIG_SPL_BOARD_INIT=y
  31# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
  32CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  33CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
  34CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
  35CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
  36CONFIG_SPL_DMA=y
  37CONFIG_SPL_MMC_TINY=y
  38CONFIG_SPL_DM_SPI_FLASH=y
  39CONFIG_SPL_OS_BOOT=y
  40CONFIG_SPL_SPI_LOAD=y
  41CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
  42CONFIG_SPL_YMODEM_SUPPORT=y
  43CONFIG_HUSH_PARSER=y
  44CONFIG_CMD_SPL=y
  45CONFIG_CMD_ASKENV=y
  46CONFIG_CMD_GREPENV=y
  47CONFIG_CMD_DM=y
  48CONFIG_CMD_GPIO=y
  49CONFIG_CMD_MMC=y
  50CONFIG_CMD_MTD=y
  51# CONFIG_CMD_PINMUX is not set
  52CONFIG_CMD_SPI=y
  53CONFIG_CMD_DHCP=y
  54CONFIG_CMD_MII=y
  55CONFIG_CMD_PING=y
  56CONFIG_CMD_CACHE=y
  57CONFIG_CMD_REGULATOR=y
  58CONFIG_CMD_EXT4=y
  59CONFIG_CMD_FS_GENERIC=y
  60CONFIG_CMD_MTDPARTS=y
  61CONFIG_MTDIDS_DEFAULT="nor0=spi3.0"
  62CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),4096k(kernel),8192k(swupdate),-(unused2)"
  63CONFIG_DOS_PARTITION=y
  64CONFIG_OF_CONTROL=y
  65CONFIG_SPL_OF_CONTROL=y
  66CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts"
  67CONFIG_SPL_OF_PLATDATA=y
  68# CONFIG_SPL_OF_PLATDATA_PARENT is not set
  69CONFIG_ENV_OVERWRITE=y
  70CONFIG_ENV_IS_IN_SPI_FLASH=y
  71CONFIG_USE_ENV_SPI_BUS=y
  72CONFIG_ENV_SPI_BUS=3
  73CONFIG_USE_ENV_SPI_CS=y
  74CONFIG_ENV_SPI_CS=0
  75CONFIG_USE_ENV_SPI_MAX_HZ=y
  76CONFIG_ENV_SPI_MAX_HZ=40000000
  77CONFIG_USE_ENV_SPI_MODE=y
  78CONFIG_ENV_SPI_MODE=0x0
  79CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  80CONFIG_NET_RANDOM_ETHADDR=y
  81CONFIG_DM=y
  82CONFIG_SPL_DM=y
  83CONFIG_DEVRES=y
  84CONFIG_MXS_GPIO=y
  85CONFIG_SUPPORT_EMMC_BOOT=y
  86CONFIG_MMC_MXS=y
  87CONFIG_MTD=y
  88CONFIG_DM_SPI_FLASH=y
  89CONFIG_SF_DEFAULT_BUS=3
  90CONFIG_SF_DEFAULT_MODE=0x0
  91CONFIG_SF_DEFAULT_SPEED=40000000
  92CONFIG_SPI_FLASH_SFDP_SUPPORT=y
  93CONFIG_SPI_FLASH_ISSI=y
  94CONFIG_SPI_FLASH_SPANSION=y
  95CONFIG_SPI_FLASH_STMICRO=y
  96# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  97CONFIG_PHYLIB=y
  98CONFIG_PHY_ADDR_ENABLE=y
  99CONFIG_PHY_ADDR=1
 100CONFIG_PHY_FIXED=y
 101CONFIG_DM_ETH=y
 102CONFIG_FEC_MXC=y
 103CONFIG_MII=y
 104CONFIG_PINCTRL=y
 105CONFIG_PINCTRL_MXS=y
 106CONFIG_DM_REGULATOR=y
 107CONFIG_DM_REGULATOR_FIXED=y
 108CONFIG_DM_REGULATOR_GPIO=y
 109CONFIG_CONS_INDEX=0
 110CONFIG_SPI=y
 111CONFIG_DM_SPI=y
 112CONFIG_MXS_SPI=y
 113CONFIG_FS_FAT=y
 114# CONFIG_SPL_OF_LIBFDT is not set
 115