1 2Summary 3======= 4 5This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based 6S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2 7(and other) boards [1]. 8 9Currently the following boards are supported: 10 11* FriendlyArm NanoPi2 [2] 12* FriendlyArm NanoPC-T2 [3] 13 14 15Build 16===== 17 18* NanoPi2 and NanoPC-T2 19 20make s5p4418_nanopi2_defconfig 21make 22 23 24Installation 25============ 26 27- Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android, 28 friendlyCore and LUbuntu) 29- Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card 30- Use dd in the directory where U-Boot has been built to update U-Boot: 31 (replace <SD-card> with the device used for the SD-card, e.g. sdc) 32 sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card> 33- Boot the board from this SD-card 34 35The source code for (the used?) LUbuntu 16.04 can be found at [5]. 36 37 38Links 39===== 40 41[1] FriendlyArm U-boot v2016.01: 42 43https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01 44 45 46[2] NanoPi2: 47 48http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2 49 50 51[3] NanoPC-T2: 52 53http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2 54 55 56[4] FriendlyArm image files for NanoPi2: 57 58http://download.friendlyarm.com//NanoPi2 59 60 61[5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2: 62 63https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y 64