1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * Copyright (C) 2012 Freescale Semiconductor, Inc. 4 * 5 * Configuration settings for the Freescale i.MX6Q SabreSD board. 6 */ 7 8#ifndef __MX6SABRESD_CONFIG_H 9#define __MX6SABRESD_CONFIG_H 10 11#ifdef CONFIG_SPL 12#include "imx6_spl.h" 13#endif 14 15#define CONFIG_MACH_TYPE 3980 16#define CONFIG_MXC_UART_BASE UART1_BASE 17#define CONSOLE_DEV "ttymxc0" 18 19#include "mx6sabre_common.h" 20 21/* Falcon Mode */ 22#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" 23#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 24#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 25 26/* Falcon Mode - MMC support: args@1MB kernel@2MB */ 27#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ 28#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) 29#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ 30 31#define CONFIG_SYS_FSL_USDHC_NUM 3 32 33#ifdef CONFIG_CMD_PCI 34#define CONFIG_PCI_SCAN_SHOW 35#define CONFIG_PCIE_IMX 36#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 37#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) 38#endif 39 40/* I2C Configs */ 41#define CONFIG_SYS_I2C_LEGACY 42#define CONFIG_SYS_I2C_MXC 43#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 44#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 45#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 46#define CONFIG_SYS_I2C_SPEED 100000 47 48/* PMIC */ 49#define CONFIG_POWER 50#define CONFIG_POWER_I2C 51#define CONFIG_POWER_PFUZE100 52#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 53 54/* USB Configs */ 55#ifdef CONFIG_CMD_USB 56#define CONFIG_EHCI_HCD_INIT_AFTER_RESET 57#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 58#define CONFIG_MXC_USB_FLAGS 0 59#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 60#endif 61 62#endif /* __MX6SABRESD_CONFIG_H */ 63