1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * Copyright (C) 2012 Samsung Electronics 4 * 5 * Author: InKi Dae <inki.dae@samsung.com> 6 * Author: Donghwa Lee <dh09.lee@samsung.com> 7 */ 8 9#ifndef _DSIM_H 10#define _DSIM_H 11 12#include <linux/list.h> 13#include <linux/fb.h> 14#include <lcd.h> 15 16#define PANEL_NAME_SIZE (32) 17 18enum mipi_dsim_interface_type { 19 DSIM_COMMAND, 20 DSIM_VIDEO 21}; 22 23enum mipi_dsim_virtual_ch_no { 24 DSIM_VIRTUAL_CH_0, 25 DSIM_VIRTUAL_CH_1, 26 DSIM_VIRTUAL_CH_2, 27 DSIM_VIRTUAL_CH_3 28}; 29 30enum mipi_dsim_burst_mode_type { 31 DSIM_NON_BURST_SYNC_EVENT, 32 DSIM_BURST_SYNC_EVENT, 33 DSIM_NON_BURST_SYNC_PULSE, 34 DSIM_BURST, 35 DSIM_NON_VIDEO_MODE 36}; 37 38enum mipi_dsim_no_of_data_lane { 39 DSIM_DATA_LANE_1, 40 DSIM_DATA_LANE_2, 41 DSIM_DATA_LANE_3, 42 DSIM_DATA_LANE_4 43}; 44 45enum mipi_dsim_byte_clk_src { 46 DSIM_PLL_OUT_DIV8, 47 DSIM_EXT_CLK_DIV8, 48 DSIM_EXT_CLK_BYPASS 49}; 50 51enum mipi_dsim_pixel_format { 52 DSIM_CMD_3BPP, 53 DSIM_CMD_8BPP, 54 DSIM_CMD_12BPP, 55 DSIM_CMD_16BPP, 56 DSIM_VID_16BPP_565, 57 DSIM_VID_18BPP_666PACKED, 58 DSIM_18BPP_666LOOSELYPACKED, 59 DSIM_24BPP_888 60}; 61 62/* MIPI DSI Processor-to-Peripheral transaction types */ 63enum { 64 MIPI_DSI_V_SYNC_START = 0x01, 65 MIPI_DSI_V_SYNC_END = 0x11, 66 MIPI_DSI_H_SYNC_START = 0x21, 67 MIPI_DSI_H_SYNC_END = 0x31, 68 69 MIPI_DSI_COLOR_MODE_OFF = 0x02, 70 MIPI_DSI_COLOR_MODE_ON = 0x12, 71 MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22, 72 MIPI_DSI_TURN_ON_PERIPHERAL = 0x32, 73 74 MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03, 75 MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13, 76 MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23, 77 78 MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04, 79 MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14, 80 MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24, 81 82 MIPI_DSI_DCS_SHORT_WRITE = 0x05, 83 MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15, 84 85 MIPI_DSI_DCS_READ = 0x06, 86 87 MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, 88 89 MIPI_DSI_END_OF_TRANSMISSION = 0x08, 90 91 MIPI_DSI_NULL_PACKET = 0x09, 92 MIPI_DSI_BLANKING_PACKET = 0x19, 93 MIPI_DSI_GENERIC_LONG_WRITE = 0x29, 94 MIPI_DSI_DCS_LONG_WRITE = 0x39, 95 96 MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c, 97 MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c, 98 MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c, 99 100 MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d, 101 MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d, 102 MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d, 103 104 MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e, 105 MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e, 106 MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e, 107 MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e, 108}; 109 110/* 111 * struct mipi_dsim_config - interface for configuring mipi-dsi controller. 112 * 113 * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse. 114 * @eot_disable: enable or disable EoT packet in HS mode. 115 * @auto_vertical_cnt: specifies auto vertical count mode. 116 * in Video mode, the vertical line transition uses line counter 117 * configured by VSA, VBP, and Vertical resolution. 118 * If this bit is set to '1', the line counter does not use VSA and VBP 119 * registers.(in command mode, this variable is ignored) 120 * @hse: set horizontal sync event mode. 121 * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC 122 * start packet to MIPI DSI slave at MIPI DSI spec1.1r02. 123 * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area 124 * (in mommand mode, this variable is ignored) 125 * @hfp: specifies HFP disable mode. 126 * if this variable is set, DSI master ignores HFP area in VIDEO mode. 127 * (in command mode, this variable is ignored) 128 * @hbp: specifies HBP disable mode. 129 * if this variable is set, DSI master ignores HBP area in VIDEO mode. 130 * (in command mode, this variable is ignored) 131 * @hsa: specifies HSA disable mode. 132 * if this variable is set, DSI master ignores HSA area in VIDEO mode. 133 * (in command mode, this variable is ignored) 134 * @e_interface: specifies interface to be used.(CPU or RGB interface) 135 * @e_virtual_ch: specifies virtual channel number that main or 136 * sub diaplsy uses. 137 * @e_pixel_format: specifies pixel stream format for main or sub display. 138 * @e_burst_mode: selects Burst mode in Video mode. 139 * in Non-burst mode, RGB data area is filled with RGB data and NULL 140 * packets, according to input bandwidth of RGB interface. 141 * In Burst mode, RGB data area is filled with RGB data only. 142 * @e_no_data_lane: specifies data lane count to be used by Master. 143 * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8) 144 * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported. 145 * @pll_stable_time: specifies the PLL Timer for stability of the ganerated 146 * clock(System clock cycle base) 147 * if the timer value goes to 0x00000000, the clock stable bit of status 148 * and interrupt register is set. 149 * @esc_clk: specifies escape clock frequency for getting the escape clock 150 * prescaler value. 151 * @stop_holding_cnt: specifies the interval value between transmitting 152 * read packet(or write "set_tear_on" command) and BTA request. 153 * after transmitting read packet or write "set_tear_on" command, 154 * BTA requests to D-PHY automatically. this counter value specifies 155 * the interval between them. 156 * @bta_timeout: specifies the timer for BTA. 157 * this register specifies time out from BTA request to change 158 * the direction with respect to Tx escape clock. 159 * @rx_timeout: specifies the timer for LP Rx mode timeout. 160 * this register specifies time out on how long RxValid deasserts, 161 * after RxLpdt asserts with respect to Tx escape clock. 162 * - RxValid specifies Rx data valid indicator. 163 * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode. 164 * - RxValid and RxLpdt specifies signal from D-PHY. 165 */ 166struct mipi_dsim_config { 167 unsigned char auto_flush; 168 unsigned char eot_disable; 169 170 unsigned char auto_vertical_cnt; 171 unsigned char hse; 172 unsigned char hfp; 173 unsigned char hbp; 174 unsigned char hsa; 175 176 enum mipi_dsim_interface_type e_interface; 177 enum mipi_dsim_virtual_ch_no e_virtual_ch; 178 enum mipi_dsim_pixel_format e_pixel_format; 179 enum mipi_dsim_burst_mode_type e_burst_mode; 180 enum mipi_dsim_no_of_data_lane e_no_data_lane; 181 enum mipi_dsim_byte_clk_src e_byte_clk; 182 183 /* 184 * =========================================== 185 * | P | M | S | MHz | 186 * ------------------------------------------- 187 * | 3 | 100 | 3 | 100 | 188 * | 3 | 100 | 2 | 200 | 189 * | 3 | 63 | 1 | 252 | 190 * | 4 | 100 | 1 | 300 | 191 * | 4 | 110 | 1 | 330 | 192 * | 12 | 350 | 1 | 350 | 193 * | 3 | 100 | 1 | 400 | 194 * | 4 | 150 | 1 | 450 | 195 * | 6 | 118 | 1 | 472 | 196 * | 3 | 120 | 1 | 480 | 197 * | 12 | 250 | 0 | 500 | 198 * | 4 | 100 | 0 | 600 | 199 * | 3 | 81 | 0 | 648 | 200 * | 3 | 88 | 0 | 704 | 201 * | 3 | 90 | 0 | 720 | 202 * | 3 | 100 | 0 | 800 | 203 * | 12 | 425 | 0 | 850 | 204 * | 4 | 150 | 0 | 900 | 205 * | 12 | 475 | 0 | 950 | 206 * | 6 | 250 | 0 | 1000 | 207 * ------------------------------------------- 208 */ 209 210 /* 211 * pms could be calculated as the following. 212 * M * 24 / P * 2 ^ S = MHz 213 */ 214 unsigned char p; 215 unsigned short m; 216 unsigned char s; 217 218 unsigned int pll_stable_time; 219 unsigned long esc_clk; 220 221 unsigned short stop_holding_cnt; 222 unsigned char bta_timeout; 223 unsigned short rx_timeout; 224}; 225 226/* 227 * struct mipi_dsim_device - global interface for mipi-dsi driver. 228 * 229 * @dsim_config: infomation for configuring mipi-dsi controller. 230 * @master_ops: callbacks to mipi-dsi operations. 231 * @dsim_lcd_dev: pointer to activated ddi device. 232 * (it would be registered by mipi-dsi driver.) 233 * @dsim_lcd_drv: pointer to activated_ddi driver. 234 * (it would be registered by mipi-dsi driver.) 235 * @state: specifies status of MIPI-DSI controller. 236 * the status could be RESET, INIT, STOP, HSCLKEN and ULPS. 237 * @data_lane: specifiec enabled data lane number. 238 * this variable would be set by driver according to e_no_data_lane 239 * automatically. 240 * @e_clk_src: select byte clock source. 241 * @pd: pointer to MIPI-DSI driver platform data. 242 */ 243struct mipi_dsim_device { 244 struct mipi_dsim_config *dsim_config; 245 struct mipi_dsim_master_ops *master_ops; 246 struct mipi_dsim_lcd_device *dsim_lcd_dev; 247 struct mipi_dsim_lcd_driver *dsim_lcd_drv; 248 249 unsigned int state; 250 unsigned int data_lane; 251 enum mipi_dsim_byte_clk_src e_clk_src; 252 253 struct exynos_platform_mipi_dsim *pd; 254}; 255 256/* 257 * struct exynos_platform_mipi_dsim - interface to platform data 258 * for mipi-dsi driver. 259 * 260 * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver. 261 * lcd panel driver searched would be actived. 262 * @dsim_config: pointer of structure for configuring mipi-dsi controller. 263 * @lcd_panel_info: pointer for lcd panel specific structure. 264 * this structure specifies width, height, timing and polarity and so on. 265 * @lcd_power: callback pointer for enabling or disabling lcd power. 266 * @mipi_power: callback pointer for enabling or disabling mipi power. 267 * @phy_enable: pointer to a callback controlling D-PHY enable/reset 268 */ 269struct exynos_platform_mipi_dsim { 270 char lcd_panel_name[PANEL_NAME_SIZE]; 271 272 struct mipi_dsim_config *dsim_config; 273 void *lcd_panel_info; 274 275 int (*lcd_power)(void); 276 int (*mipi_power)(void); 277 void (*phy_enable)(unsigned int dev_index, unsigned int enable); 278}; 279 280/* 281 * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations. 282 * 283 * @cmd_write: transfer command to lcd panel at LP mode. 284 * @cmd_read: read command from rx register. 285 * @get_dsim_frame_done: get the status that all screen data have been 286 * transferred to mipi-dsi. 287 * @clear_dsim_frame_done: clear frame done status. 288 * @get_fb_frame_done: get frame done status of display controller. 289 * @trigger: trigger display controller. 290 * - this one would be used only in case of CPU mode. 291 */ 292struct mipi_dsim_master_ops { 293 int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, 294 const unsigned char *data0, unsigned int data1); 295 int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, 296 unsigned int data0, unsigned int data1); 297 int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); 298 int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim); 299 300 int (*get_fb_frame_done)(void); 301 void (*trigger)(struct fb_info *info); 302}; 303 304/* 305 * device structure for mipi-dsi based lcd panel. 306 * 307 * @name: name of the device to use with this device, or an 308 * alias for that name. 309 * @id: id of device to be registered. 310 * @bus_id: bus id for identifing connected bus 311 * and this bus id should be same as id of mipi_dsim_device. 312 * @master: pointer to mipi-dsi master device object. 313 * @platform_data: lcd panel specific platform data. 314 */ 315struct mipi_dsim_lcd_device { 316 char *name; 317 int id; 318 int bus_id; 319 int reverse_panel; 320 321 struct mipi_dsim_device *master; 322 struct exynos_platform_mipi_dsim *platform_data; 323}; 324 325/* 326 * driver structure for mipi-dsi based lcd panel. 327 * 328 * this structure should be registered by lcd panel driver. 329 * mipi-dsi driver seeks lcd panel registered through name field 330 * and calls these callback functions in appropriate time. 331 * 332 * @name: name of the driver to use with this device, or an 333 * alias for that name. 334 * @id: id of driver to be registered. 335 * this id would be used for finding device object registered. 336 * @mipi_panel_init: callback pointer for initializing lcd panel based on mipi 337 * dsi interface. 338 * @mipi_display_on: callback pointer for lcd panel display on. 339 */ 340struct mipi_dsim_lcd_driver { 341 char *name; 342 int id; 343 344 int (*mipi_panel_init)(struct mipi_dsim_device *dsim_dev); 345 void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev); 346}; 347 348#ifdef CONFIG_EXYNOS_MIPI_DSIM 349int exynos_mipi_dsi_init(struct exynos_platform_mipi_dsim *dsim_pd); 350#else 351static inline int exynos_mipi_dsi_init( 352 struct exynos_platform_mipi_dsim *dsim_pd) 353{ 354 return 0; 355} 356#endif 357 358/* 359 * register mipi_dsim_lcd_driver object defined by lcd panel driver 360 * to mipi-dsi driver. 361 */ 362int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver 363 *lcd_drv); 364 365/* 366 * register mipi_dsim_lcd_device to mipi-dsi master. 367 */ 368int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device 369 *lcd_dev); 370 371void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd); 372struct vidinfo; 373void exynos_init_dsim_platform_data(struct vidinfo *vid); 374 375/* panel driver init based on mipi dsi interface */ 376void s6e8ax0_init(void); 377 378extern int mipi_power(void); 379#endif /* _DSIM_H */ 380