uboot/arch/arm/mach-zynqmp/Kconfig
<<
>>
Prefs
   1if ARCH_ZYNQMP
   2
   3config SPL_FS_FAT
   4        default y
   5
   6config SPL_LIBCOMMON_SUPPORT
   7        default y
   8
   9config SPL_LIBDISK_SUPPORT
  10        default y
  11
  12config SPL_LIBGENERIC_SUPPORT
  13        default y
  14
  15config SPL_MMC
  16        default y if MMC_SDHCI_ZYNQ
  17
  18config SPL_SERIAL
  19        default y
  20
  21config SPL_SPI_FLASH_SUPPORT
  22        default y if ZYNQ_QSPI
  23
  24config SPL_SPI
  25        default y if ZYNQ_QSPI
  26
  27config SYS_BOARD
  28        string "Board name"
  29        default "zynqmp"
  30
  31config SYS_VENDOR
  32        string "Vendor name"
  33        default "xilinx"
  34
  35config SYS_SOC
  36        default "zynqmp"
  37
  38config SYS_CONFIG_NAME
  39        string "Board configuration name"
  40        default "xilinx_zynqmp"
  41        help
  42          This option contains information about board configuration name.
  43          Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
  44          will be used for board configuration.
  45
  46config SYS_MEM_RSVD_FOR_MMU
  47        bool "Reserve memory for MMU Table"
  48        help
  49          If defined this option is used to setup different space for
  50          MMU table than the one which will be allocated during
  51          relocation.
  52
  53config BOOT_INIT_FILE
  54        string "boot.bin init register filename"
  55        depends on SPL
  56        default ""
  57        help
  58          Add register writes to boot.bin format (max 256 pairs).
  59          Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
  60
  61config PMUFW_INIT_FILE
  62        string "PMU firmware"
  63        depends on SPL
  64        default ""
  65        help
  66          Include external PMUFW (Platform Management Unit FirmWare) to
  67          a Xilinx bootable image (boot.bin).
  68
  69config ZYNQMP_SPL_PM_CFG_OBJ_FILE
  70        string "PMU firmware configuration object to load at runtime by SPL"
  71        depends on SPL
  72        help
  73          Path to a binary PMU firmware configuration object to be linked
  74          into U-Boot SPL and loaded at runtime into the PMU firmware.
  75
  76          The ZynqMP Power Management Unit (PMU) needs a configuration
  77          object for most SoC peripherals to work. To have it loaded by
  78          U-Boot SPL set here the file name (absolute path or relative to
  79          the top source tree) of your configuration, which must be a
  80          binary blob. It will be linked in the SPL binary and loaded
  81          into the PMU firmware by U-Boot SPL during board
  82          initialization.
  83
  84          Leave this option empty if your PMU firmware has a hard-coded
  85          configuration object or you are loading it by any other means.
  86
  87config ZYNQMP_USB
  88        bool "Configure ZynqMP USB"
  89
  90config ZYNQMP_NO_DDR
  91        bool "Disable DDR MMU mapping"
  92        help
  93          This option configures MMU with no DDR to avoid speculative
  94          access to DDR memory where DDR is not present.
  95
  96config SPL_ZYNQMP_DRAM_ECC_INIT
  97        bool "Initialize DRAM ECC"
  98        depends on SPL
  99        help
 100          This option initializes all memory to 0xdeadbeef. Must be set if your
 101          memory is of ECC type.
 102
 103config SPL_ZYNQMP_DRAM_BANK1_BASE
 104        depends on SPL_ZYNQMP_DRAM_ECC_INIT
 105        hex "DRAM Bank1 address"
 106       default 0x00000000
 107       help
 108         Start address of DRAM ECC bank1
 109
 110config SPL_ZYNQMP_DRAM_BANK1_LEN
 111        depends on SPL_ZYNQMP_DRAM_ECC_INIT
 112        hex "DRAM Bank1 size"
 113       default 0x80000000
 114       help
 115         Size in bytes of the DRAM ECC bank1
 116
 117config SPL_ZYNQMP_DRAM_BANK2_BASE
 118        depends on SPL_ZYNQMP_DRAM_ECC_INIT
 119        hex "DRAM Bank2 address"
 120       default 0x800000000
 121       help
 122         Start address of DRAM ECC bank2
 123
 124config SPL_ZYNQMP_DRAM_BANK2_LEN
 125        depends on SPL_ZYNQMP_DRAM_ECC_INIT
 126        hex "DRAM Bank2 size"
 127       default 0x0
 128       help
 129         Size in bytes of the DRAM ECC bank2. A null size takes no action.
 130
 131config SYS_MALLOC_F_LEN
 132        default 0x600
 133
 134config DEFINE_TCM_OCM_MMAP
 135        bool "Define TCM and OCM memory in MMU Table"
 136        default y if MP
 137        help
 138          This option if enabled defines the TCM and OCM memory and its
 139          memory attributes in MMU table entry.
 140
 141config ZYNQMP_PSU_INIT_ENABLED
 142        bool "Include psu_init"
 143        select BOARD_EARLY_INIT_F
 144        help
 145          Include psu_init to full u-boot. SPL include psu_init by default.
 146
 147config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
 148        bool "Overwrite SPL bootmode"
 149        depends on SPL
 150        help
 151          Overwrite bootmode selected via boot mode pins to tell SPL what should
 152          be the next boot device.
 153
 154config SPL_ZYNQMP_RESTORE_JTAG
 155        bool "Restore JTAG"
 156        depends on SPL
 157        help
 158          Booting SPL in secure mode causes the CSU to disable the JTAG interface
 159          even if no eFuses were burnt. This option restores the interface if
 160          possible.
 161
 162config ZYNQ_SDHCI_MAX_FREQ
 163        default 200000000
 164
 165config SPL_ZYNQMP_ALT_BOOTMODE
 166        hex
 167        default 0x0 if JTAG_MODE
 168        default 0x1 if QSPI_MODE_24BIT
 169        default 0x2 if QSPI_MODE_32BIT
 170        default 0x3 if SD_MODE
 171        default 0x4 if NAND_MODE
 172        default 0x5 if SD_MODE1
 173        default 0x6 if EMMC_MODE
 174        default 0x7 if USB_MODE
 175        default 0xa if SW_USBHOST_MODE
 176        default 0xb if SW_SATA_MODE
 177        default 0xe if SD1_LSHFT_MODE
 178
 179choice
 180        prompt "Boot mode"
 181        depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
 182        default JTAG_MODE
 183
 184config JTAG_MODE
 185        bool "JTAG_MODE"
 186
 187config QSPI_MODE_24BIT
 188        bool "QSPI_MODE_24BIT"
 189
 190config QSPI_MODE_32BIT
 191        bool "QSPI_MODE_32BIT"
 192
 193config SD_MODE
 194        bool "SD_MODE"
 195
 196config SD_MODE1
 197        bool "SD_MODE1"
 198
 199config NAND_MODE
 200        bool "NAND_MODE"
 201
 202config EMMC_MODE
 203        bool "EMMC_MODE"
 204
 205config USB_MODE
 206        bool "USB"
 207
 208config SW_USBHOST_MODE
 209        bool "SW USBHOST_MODE"
 210
 211config SW_SATA_MODE
 212        bool "SW SATA_MODE"
 213
 214config SD1_LSHFT_MODE
 215        bool "SD1_LSHFT_MODE"
 216
 217endchoice
 218
 219source "board/xilinx/Kconfig"
 220source "board/xilinx/zynqmp/Kconfig"
 221
 222endif
 223