LXR uboot/arch/arm/mach-lpc32xx/dram.c

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * LPC32xx dram init
   4 *
   5 * (C) Copyright 2014  DENX Software Engineering GmbH
   6 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
   7 *
   8 * This is called by SPL to gain access to the SDR DRAM.
   9 *
  10 * This code runs from SRAM.
  11 */
  12
  13#include <common.h>
  14#include <netdev.h>
  15#include <asm/arch/cpu.h>
  16#include <asm/arch/clk.h>
  17#include <asm/arch/wdt.h>
  18#include <asm/arch/emc.h>
  19#include <asm/io.h>
  20#include <linux/delay.h>
  21
  22static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
  23static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
  24
  25void ddr_init(struct emc_dram_settings *dram)
  26{
  27        uint32_t ck;
  28
  29        /* Enable EMC interface and choose little endian mode */
  30        writel(1, &emc->ctrl);
  31        writel(0, &emc->config);
  32        /* Select maximum EMC Dynamic Memory Refresh Time */
  33        writel(0x7FF, &emc->refresh);
  34        /* Determine CLK */
  35        ck = get_sdram_clk_rate();
  36        /* Configure SDRAM */
  37        writel(dram->cmddelay, &clk->sdramclk_ctrl);
  38        writel(dram->config0, &emc->config0);
  39        writel(dram->rascas0, &emc->rascas0);
  40        writel(dram->rdconfig, &emc->read_config);
  41        /* Set timings */
  42        writel((ck / dram->trp) & 0x0000000F, &emc->t_rp);
  43        writel((ck / dram->tras) & 0x0000000F, &emc->t_ras);
  44        writel((ck / dram->tsrex) & 0x0000007F, &emc->t_srex);
  45        writel((ck / dram->twr) & 0x0000000F, &emc->t_wr);
  46        writel((ck / dram->trc) & 0x0000001F, &emc->t_rc);
  47        writel((ck / dram->trfc) & 0x0000001F, &emc->t_rfc);
  48        writel((ck / dram->txsr) & 0x000000FF, &emc->t_xsr);
  49        writel(dram->trrd, &emc->t_rrd);
  50        writel(dram->tmrd, &emc->t_mrd);
  51        writel(dram->tcdlr, &emc->t_cdlr);
  52        /* Dynamic refresh */
  53        writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
  54        udelay(10);
  55        /* Force all clocks, enable inverted ck, issue NOP command */
  56        writel(0x00000193, &emc->control);
  57        udelay(100);
  58        /* Keep all clocks enabled, issue a PRECHARGE ALL command */
  59        writel(0x00000113, &emc->control);
  60        /* Fast dynamic refresh for at least a few SDRAM ck cycles */
  61        writel((((128) >> 4) & 0x7FF), &emc->refresh);
  62        udelay(10);
  63        /* set correct dynamic refresh timing */
  64        writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
  65        udelay(10);
  66        /* set normal mode to CAS=3 */
  67        writel(0x00000093, &emc->control);
  68        readl(EMC_DYCS0_BASE | dram->mode);
  69        /* set extended mode to all zeroes */
  70        writel(0x00000093, &emc->control);
  71        readl(EMC_DYCS0_BASE | dram->emode);
  72        /* stop forcing clocks, keep inverted clock, issue normal mode */
  73        writel(0x00000010, &emc->control);
  74}
  75