uboot/configs/at91sam9x5ek_spiflash_defconfig
<<
>>
Prefs
   1CONFIG_ARM=y
   2CONFIG_SKIP_LOWLEVEL_INIT=y
   3CONFIG_ARCH_AT91=y
   4CONFIG_SYS_TEXT_BASE=0x26f00000
   5CONFIG_SYS_MALLOC_LEN=0x81000
   6CONFIG_TARGET_AT91SAM9X5EK=y
   7CONFIG_ATMEL_LEGACY=y
   8CONFIG_NR_DRAM_BANKS=1
   9CONFIG_ENV_SIZE=0x3000
  10CONFIG_ENV_OFFSET=0x5000
  11CONFIG_ENV_SECT_SIZE=0x1000
  12CONFIG_DM_GPIO=y
  13CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
  14CONFIG_DEBUG_UART_BOARD_INIT=y
  15CONFIG_DEBUG_UART_BASE=0xfffff200
  16CONFIG_DEBUG_UART_CLOCK=132000000
  17CONFIG_SYS_LOAD_ADDR=0x22000000
  18CONFIG_DEBUG_UART=y
  19CONFIG_FIT=y
  20CONFIG_SPI_BOOT=y
  21CONFIG_BOOTDELAY=3
  22CONFIG_USE_BOOTARGS=y
  23CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
  24CONFIG_USE_BOOTCOMMAND=y
  25CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000"
  26# CONFIG_CONSOLE_MUX is not set
  27CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  28# CONFIG_DISPLAY_BOARDINFO is not set
  29CONFIG_HUSH_PARSER=y
  30CONFIG_SYS_PROMPT="U-Boot> "
  31CONFIG_CMD_BOOTZ=y
  32# CONFIG_CMD_FLASH is not set
  33CONFIG_CMD_MMC=y
  34CONFIG_CMD_NAND=y
  35CONFIG_CMD_NAND_TRIMFFS=y
  36CONFIG_CMD_USB=y
  37# CONFIG_CMD_SETEXPR is not set
  38CONFIG_CMD_DHCP=y
  39CONFIG_BOOTP_BOOTFILESIZE=y
  40CONFIG_CMD_PING=y
  41CONFIG_CMD_FAT=y
  42CONFIG_CMD_MTDPARTS=y
  43CONFIG_CMD_UBI=y
  44CONFIG_OF_CONTROL=y
  45CONFIG_ENV_IS_IN_SPI_FLASH=y
  46CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  47CONFIG_DM=y
  48CONFIG_CLK=y
  49CONFIG_CLK_AT91=y
  50CONFIG_AT91_GPIO=y
  51CONFIG_GENERIC_ATMEL_MCI=y
  52CONFIG_MTD=y
  53CONFIG_MTD_RAW_NAND=y
  54CONFIG_NAND_ATMEL=y
  55CONFIG_ATMEL_NAND_HW_PMECC=y
  56CONFIG_DM_SPI_FLASH=y
  57CONFIG_SF_DEFAULT_SPEED=30000000
  58CONFIG_SPI_FLASH_ATMEL=y
  59CONFIG_DM_ETH=y
  60CONFIG_MACB=y
  61CONFIG_PINCTRL=y
  62CONFIG_PINCTRL_AT91=y
  63CONFIG_DM_SERIAL=y
  64CONFIG_DEBUG_UART_ANNOUNCE=y
  65CONFIG_ATMEL_USART=y
  66CONFIG_SPI=y
  67CONFIG_DM_SPI=y
  68CONFIG_TIMER=y
  69CONFIG_ATMEL_PIT_TIMER=y
  70CONFIG_USB=y
  71CONFIG_USB_EHCI_HCD=y
  72CONFIG_USB_STORAGE=y
  73CONFIG_DM_VIDEO=y
  74# CONFIG_VIDEO_BPP8 is not set
  75# CONFIG_VIDEO_BPP32 is not set
  76CONFIG_ATMEL_HLCD=y
  77