uboot/configs/vf610twr_defconfig
<<
>>
Prefs
   1CONFIG_ARM=y
   2CONFIG_SKIP_LOWLEVEL_INIT=y
   3CONFIG_SYS_THUMB_BUILD=y
   4CONFIG_ARCH_VF610=y
   5CONFIG_SYS_TEXT_BASE=0x3f401000
   6CONFIG_SYS_MALLOC_LEN=0x202000
   7CONFIG_SYS_MALLOC_F_LEN=0x400
   8CONFIG_NR_DRAM_BANKS=1
   9CONFIG_ENV_SIZE=0x2000
  10CONFIG_ENV_OFFSET=0xC0000
  11CONFIG_SYS_I2C_MXC_I2C1=y
  12CONFIG_SYS_I2C_MXC_I2C2=y
  13CONFIG_DM_GPIO=y
  14CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
  15CONFIG_SYS_LOAD_ADDR=0x82000000
  16CONFIG_SYS_MEMTEST_START=0x80010000
  17CONFIG_SYS_MEMTEST_END=0x87c00000
  18CONFIG_HAS_BOARD_SIZE_LIMIT=y
  19CONFIG_BOARD_SIZE_LIMIT=520192
  20CONFIG_BOOTDELAY=3
  21CONFIG_USE_BOOTCOMMAND=y
  22CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
  23CONFIG_LOGLEVEL=3
  24CONFIG_BOARD_EARLY_INIT_F=y
  25CONFIG_HUSH_PARSER=y
  26# CONFIG_CMDLINE_EDITING is not set
  27# CONFIG_AUTO_COMPLETE is not set
  28CONFIG_CMD_BOOTZ=y
  29CONFIG_CMD_MEMTEST=y
  30CONFIG_CMD_FUSE=y
  31CONFIG_CMD_GPIO=y
  32CONFIG_CMD_I2C=y
  33CONFIG_CMD_MMC=y
  34CONFIG_CMD_NAND_TRIMFFS=y
  35# CONFIG_CMD_SETEXPR is not set
  36CONFIG_CMD_DHCP=y
  37CONFIG_CMD_MII=y
  38CONFIG_CMD_PING=y
  39CONFIG_CMD_FAT=y
  40CONFIG_MTDIDS_DEFAULT="nand0=fsl_nfc"
  41CONFIG_MTDPARTS_DEFAULT="mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),4m(kernel),512k(fdt),-(rootfs)"
  42CONFIG_CMD_UBI=y
  43CONFIG_OF_CONTROL=y
  44CONFIG_ENV_OVERWRITE=y
  45CONFIG_ENV_IS_IN_MMC=y
  46CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  47CONFIG_DM=y
  48CONFIG_VYBRID_GPIO=y
  49CONFIG_SYS_I2C_LEGACY=y
  50CONFIG_SYS_I2C_MXC=y
  51CONFIG_FSL_ESDHC_IMX=y
  52CONFIG_MTD=y
  53CONFIG_NAND_VF610_NFC=y
  54CONFIG_SYS_NAND_ONFI_DETECTION=y
  55CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
  56CONFIG_PHYLIB=y
  57CONFIG_PHY_MICREL=y
  58CONFIG_PHY_MICREL_KSZ8XXX=y
  59CONFIG_DM_ETH=y
  60CONFIG_FEC_MXC=y
  61CONFIG_MII=y
  62CONFIG_DM_SERIAL=y
  63CONFIG_FSL_LPUART=y
  64