uboot/drivers/ata/fsl_sata.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
   4 * Copyright 2019 NXP
   5 * Author: Dave Liu <daveliu@freescale.com>
   6 */
   7
   8#include <common.h>
   9#include <ahci.h>
  10#include <blk.h>
  11#include <command.h>
  12#include <console.h>
  13#include <cpu_func.h>
  14#include <dm.h>
  15#include <dm/device-internal.h>
  16#include <log.h>
  17#include <asm/io.h>
  18#include <asm/processor.h>
  19#include <asm/fsl_serdes.h>
  20#include <malloc.h>
  21#include <libata.h>
  22#include <fis.h>
  23#include <sata.h>
  24#include <linux/delay.h>
  25#include "fsl_sata.h"
  26
  27static inline void sdelay(unsigned long sec)
  28{
  29        unsigned long i;
  30        for (i = 0; i < sec; i++)
  31                mdelay(1000);
  32}
  33
  34static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
  35{
  36        printf("Status FIS dump:\n\r");
  37        printf("fis_type:               %02x\n\r", s->fis_type);
  38        printf("pm_port_i:              %02x\n\r", s->pm_port_i);
  39        printf("status:                 %02x\n\r", s->status);
  40        printf("error:                  %02x\n\r", s->error);
  41        printf("lba_low:                %02x\n\r", s->lba_low);
  42        printf("lba_mid:                %02x\n\r", s->lba_mid);
  43        printf("lba_high:               %02x\n\r", s->lba_high);
  44        printf("device:                 %02x\n\r", s->device);
  45        printf("lba_low_exp:            %02x\n\r", s->lba_low_exp);
  46        printf("lba_mid_exp:            %02x\n\r", s->lba_mid_exp);
  47        printf("lba_high_exp:           %02x\n\r", s->lba_high_exp);
  48        printf("res1:                   %02x\n\r", s->res1);
  49        printf("sector_count:           %02x\n\r", s->sector_count);
  50        printf("sector_count_exp:       %02x\n\r", s->sector_count_exp);
  51}
  52
  53static int ata_wait_register(unsigned __iomem *addr, u32 mask,
  54                         u32 val, u32 timeout_msec)
  55{
  56        int i;
  57        u32 temp;
  58
  59        for (i = 0; (((temp = in_le32(addr)) & mask) != val)
  60                         && i < timeout_msec; i++)
  61                mdelay(1);
  62        return (i < timeout_msec) ? 0 : -1;
  63}
  64
  65static int init_sata(struct fsl_ata_priv *priv, int dev)
  66{
  67        u32 length, align;
  68        cmd_hdr_tbl_t *cmd_hdr;
  69        u32 cda;
  70        u32 val32;
  71        fsl_sata_reg_t __iomem *reg;
  72        u32 sig;
  73        int i;
  74        fsl_sata_t *sata;
  75
  76        if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
  77                printf("the sata index %d is out of ranges\n\r", dev);
  78                return -1;
  79        }
  80
  81#ifdef CONFIG_MPC85xx
  82        if ((dev == 0) && (!is_serdes_configured(SATA1))) {
  83                printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
  84                return -1;
  85        }
  86        if ((dev == 1) && (!is_serdes_configured(SATA2))) {
  87                printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
  88                return -1;
  89        }
  90#endif
  91
  92        /* Allocate SATA device driver struct */
  93        sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
  94        if (!sata) {
  95                printf("alloc the sata device struct failed\n\r");
  96                return -1;
  97        }
  98        /* Zero all of the device driver struct */
  99        memset((void *)sata, 0, sizeof(fsl_sata_t));
 100
 101        snprintf(sata->name, 12, "SATA%d:", dev);
 102
 103        /* Set the controller register base address to device struct */
 104        reg = (fsl_sata_reg_t *)(priv->base + priv->offset * dev);
 105        sata->dma_flag = priv->flag;
 106        priv->fsl_sata = sata;
 107        sata->reg_base = reg;
 108
 109        /* Allocate the command header table, 4 bytes aligned */
 110        length = sizeof(struct cmd_hdr_tbl);
 111        align = SATA_HC_CMD_HDR_TBL_ALIGN;
 112        sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
 113        if (!sata->cmd_hdr_tbl_offset) {
 114                printf("alloc the command header failed\n\r");
 115                return -1;
 116        }
 117
 118        cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
 119                                                & ~(align - 1));
 120        sata->cmd_hdr = cmd_hdr;
 121
 122        /* Zero all of the command header table */
 123        memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
 124
 125        /* Allocate command descriptor for all command */
 126        length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
 127        align = SATA_HC_CMD_DESC_ALIGN;
 128        sata->cmd_desc_offset = (void *)malloc(length + align);
 129        if (!sata->cmd_desc_offset) {
 130                printf("alloc the command descriptor failed\n\r");
 131                return -1;
 132        }
 133        sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
 134                                                & ~(align - 1));
 135        /* Zero all of command descriptor */
 136        memset((void *)sata->cmd_desc_offset, 0, length + align);
 137
 138        /* Link the command descriptor to command header */
 139        for (i = 0; i < SATA_HC_MAX_CMD; i++) {
 140                cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
 141                                         & ~(CMD_HDR_CDA_ALIGN - 1);
 142                cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
 143        }
 144
 145        /* To have safe state, force the controller offline */
 146        val32 = in_le32(&reg->hcontrol);
 147        val32 &= ~HCONTROL_ONOFF;
 148        val32 |= HCONTROL_FORCE_OFFLINE;
 149        out_le32(&reg->hcontrol, val32);
 150
 151        /* Wait the controller offline */
 152        ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
 153
 154        /* Set the command header base address to CHBA register to tell DMA */
 155        out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
 156
 157        /* Snoop for the command header */
 158        val32 = in_le32(&reg->hcontrol);
 159        val32 |= HCONTROL_HDR_SNOOP;
 160        out_le32(&reg->hcontrol, val32);
 161
 162        /* Disable all of interrupts */
 163        val32 = in_le32(&reg->hcontrol);
 164        val32 &= ~HCONTROL_INT_EN_ALL;
 165        out_le32(&reg->hcontrol, val32);
 166
 167        /* Clear all of interrupts */
 168        val32 = in_le32(&reg->hstatus);
 169        out_le32(&reg->hstatus, val32);
 170
 171        /* Set the ICC, no interrupt coalescing */
 172        out_le32(&reg->icc, 0x01000000);
 173
 174        /* No PM attatched, the SATA device direct connect */
 175        out_le32(&reg->cqpmp, 0);
 176
 177        /* Clear SError register */
 178        val32 = in_le32(&reg->serror);
 179        out_le32(&reg->serror, val32);
 180
 181        /* Clear CER register */
 182        val32 = in_le32(&reg->cer);
 183        out_le32(&reg->cer, val32);
 184
 185        /* Clear DER register */
 186        val32 = in_le32(&reg->der);
 187        out_le32(&reg->der, val32);
 188
 189        /* No device detection or initialization action requested */
 190        out_le32(&reg->scontrol, 0x00000300);
 191
 192        /* Configure the transport layer, default value */
 193        out_le32(&reg->transcfg, 0x08000016);
 194
 195        /* Configure the link layer, default value */
 196        out_le32(&reg->linkcfg, 0x0000ff34);
 197
 198        /* Bring the controller online */
 199        val32 = in_le32(&reg->hcontrol);
 200        val32 |= HCONTROL_ONOFF;
 201        out_le32(&reg->hcontrol, val32);
 202
 203        mdelay(100);
 204
 205        /* print sata device name */
 206        printf("%s ", sata->name);
 207
 208        /* Wait PHY RDY signal changed for 500ms */
 209        ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
 210                          HSTATUS_PHY_RDY, 500);
 211
 212        /* Check PHYRDY */
 213        val32 = in_le32(&reg->hstatus);
 214        if (val32 & HSTATUS_PHY_RDY) {
 215                sata->link = 1;
 216        } else {
 217                sata->link = 0;
 218                printf("(No RDY)\n\r");
 219                return -1;
 220        }
 221
 222        /* Wait for signature updated, which is 1st D2H */
 223        ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
 224                          HSTATUS_SIGNATURE, 10000);
 225
 226        if (val32 & HSTATUS_SIGNATURE) {
 227                sig = in_le32(&reg->sig);
 228                debug("Signature updated, the sig =%08x\n\r", sig);
 229                sata->ata_device_type = ata_dev_classify(sig);
 230        }
 231
 232        /* Check the speed */
 233        val32 = in_le32(&reg->sstatus);
 234        if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
 235                printf("(1.5 Gbps)\n\r");
 236        else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
 237                printf("(3 Gbps)\n\r");
 238
 239        return 0;
 240}
 241
 242int reset_sata(int dev)
 243{
 244        return 0;
 245}
 246
 247static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
 248{
 249        printf("\n\rSATA:           %08x\n\r", (u32)reg);
 250        printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
 251        printf("CAR:            %08x\n\r", in_le32(&reg->car));
 252        printf("CCR:            %08x\n\r", in_le32(&reg->ccr));
 253        printf("CER:            %08x\n\r", in_le32(&reg->cer));
 254        printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
 255        printf("DER:            %08x\n\r", in_le32(&reg->der));
 256        printf("CHBA:           %08x\n\r", in_le32(&reg->chba));
 257        printf("HStatus:        %08x\n\r", in_le32(&reg->hstatus));
 258        printf("HControl:       %08x\n\r", in_le32(&reg->hcontrol));
 259        printf("CQPMP:          %08x\n\r", in_le32(&reg->cqpmp));
 260        printf("SIG:            %08x\n\r", in_le32(&reg->sig));
 261        printf("ICC:            %08x\n\r", in_le32(&reg->icc));
 262        printf("SStatus:        %08x\n\r", in_le32(&reg->sstatus));
 263        printf("SError:         %08x\n\r", in_le32(&reg->serror));
 264        printf("SControl:       %08x\n\r", in_le32(&reg->scontrol));
 265        printf("SNotification:  %08x\n\r", in_le32(&reg->snotification));
 266        printf("TransCfg:       %08x\n\r", in_le32(&reg->transcfg));
 267        printf("TransStatus:    %08x\n\r", in_le32(&reg->transstatus));
 268        printf("LinkCfg:        %08x\n\r", in_le32(&reg->linkcfg));
 269        printf("LinkCfg1:       %08x\n\r", in_le32(&reg->linkcfg1));
 270        printf("LinkCfg2:       %08x\n\r", in_le32(&reg->linkcfg2));
 271        printf("LinkStatus:     %08x\n\r", in_le32(&reg->linkstatus));
 272        printf("LinkStatus1:    %08x\n\r", in_le32(&reg->linkstatus1));
 273        printf("PhyCtrlCfg:     %08x\n\r", in_le32(&reg->phyctrlcfg));
 274        printf("SYSPR:          %08x\n\r", in_be32(&reg->syspr));
 275}
 276
 277static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 278                                int is_ncq, int tag, u8 *buffer, u32 len)
 279{
 280        cmd_hdr_entry_t *cmd_hdr;
 281        cmd_desc_t *cmd_desc;
 282        sata_fis_h2d_t *h2d;
 283        prd_entry_t *prde;
 284        u32 ext_c_ddc;
 285        u32 prde_count;
 286        u32 val32;
 287        u32 ttl;
 288        fsl_sata_reg_t __iomem *reg = sata->reg_base;
 289        int i;
 290
 291        /* Check xfer length */
 292        if (len > SATA_HC_MAX_XFER_LEN) {
 293                printf("max transfer length is 64MB\n\r");
 294                return 0;
 295        }
 296
 297        /* Setup the command descriptor */
 298        cmd_desc = sata->cmd_desc + tag;
 299
 300        /* Get the pointer cfis of command descriptor */
 301        h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
 302
 303        /* Zero the cfis of command descriptor */
 304        memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
 305
 306        /* Copy the cfis from user to command descriptor */
 307        h2d->fis_type = cfis->fis_type;
 308        h2d->pm_port_c = cfis->pm_port_c;
 309        h2d->command = cfis->command;
 310
 311        h2d->features = cfis->features;
 312        h2d->features_exp = cfis->features_exp;
 313
 314        h2d->lba_low = cfis->lba_low;
 315        h2d->lba_mid = cfis->lba_mid;
 316        h2d->lba_high = cfis->lba_high;
 317        h2d->lba_low_exp = cfis->lba_low_exp;
 318        h2d->lba_mid_exp = cfis->lba_mid_exp;
 319        h2d->lba_high_exp = cfis->lba_high_exp;
 320
 321        if (!is_ncq) {
 322                h2d->sector_count = cfis->sector_count;
 323                h2d->sector_count_exp = cfis->sector_count_exp;
 324        } else { /* NCQ */
 325                h2d->sector_count = (u8)(tag << 3);
 326        }
 327
 328        h2d->device = cfis->device;
 329        h2d->control = cfis->control;
 330
 331        /* Setup the PRD table */
 332        prde = (prd_entry_t *)cmd_desc->prdt;
 333        memset((void *)prde, 0, sizeof(struct prdt));
 334
 335        prde_count = 0;
 336        ttl = len;
 337        for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
 338                if (!len)
 339                        break;
 340                prde->dba = cpu_to_le32((u32)buffer & ~0x3);
 341                debug("dba = %08x\n\r", (u32)buffer);
 342
 343                if (len < PRD_ENTRY_MAX_XFER_SZ) {
 344                        ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
 345                        debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
 346                        prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
 347                        prde_count++;
 348                        prde++;
 349                        break;
 350                } else {
 351                        ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
 352                        debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
 353                        prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
 354                        buffer += PRD_ENTRY_MAX_XFER_SZ;
 355                        len -= PRD_ENTRY_MAX_XFER_SZ;
 356                        prde_count++;
 357                        prde++;
 358                }
 359        }
 360
 361        /* Setup the command slot of cmd hdr */
 362        cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
 363
 364        cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
 365
 366        val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
 367        val32 |= sizeof(sata_fis_h2d_t);
 368        cmd_hdr->prde_fis_len = cpu_to_le32(val32);
 369
 370        cmd_hdr->ttl = cpu_to_le32(ttl);
 371
 372        if (!is_ncq) {
 373                val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
 374        } else {
 375                val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
 376        }
 377
 378        tag &= CMD_HDR_ATTR_TAG;
 379        val32 |= tag;
 380
 381        debug("attribute = %08x\n\r", val32);
 382        cmd_hdr->attribute = cpu_to_le32(val32);
 383
 384        /* Make sure cmd desc and cmd slot valid before command issue */
 385        sync();
 386
 387        /* PMP*/
 388        val32 = (u32)(h2d->pm_port_c & 0x0f);
 389        out_le32(&reg->cqpmp, val32);
 390
 391        /* Wait no active */
 392        if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
 393                printf("Wait no active time out\n\r");
 394
 395        /* Issue command */
 396        if (!(in_le32(&reg->cqr) & (1 << tag))) {
 397                val32 = 1 << tag;
 398                out_le32(&reg->cqr, val32);
 399        }
 400
 401        /* Wait command completed for 10s */
 402        if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
 403                if (!is_ncq)
 404                        printf("Non-NCQ command time out\n\r");
 405                else
 406                        printf("NCQ command time out\n\r");
 407        }
 408
 409        val32 = in_le32(&reg->cer);
 410
 411        if (val32) {
 412                u32 der;
 413                fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
 414                printf("CE at device\n\r");
 415                fsl_sata_dump_regs(reg);
 416                der = in_le32(&reg->der);
 417                out_le32(&reg->cer, val32);
 418                out_le32(&reg->der, der);
 419        }
 420
 421        /* Clear complete flags */
 422        val32 = in_le32(&reg->ccr);
 423        out_le32(&reg->ccr, val32);
 424
 425        return len;
 426}
 427
 428static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 429                                 int tag, u8 *buffer, u32 len)
 430{
 431        return 0;
 432}
 433
 434static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 435                 enum cmd_type command_type, int tag, u8 *buffer, u32 len)
 436{
 437        int rc;
 438
 439        if (tag > SATA_HC_MAX_CMD || tag < 0) {
 440                printf("tag is out of range, tag=%d\n\r", tag);
 441                return -1;
 442        }
 443
 444        switch (command_type) {
 445        case CMD_ATA:
 446                rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
 447                return rc;
 448        case CMD_RESET:
 449                rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
 450                return rc;
 451        case CMD_NCQ:
 452                rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
 453                return rc;
 454        case CMD_ATAPI:
 455        case CMD_VENDOR_BIST:
 456        case CMD_BIST:
 457                printf("not support now\n\r");
 458                return -1;
 459        default:
 460                break;
 461        }
 462
 463        return -1;
 464}
 465
 466static void fsl_sata_xfer_mode(fsl_sata_t *sata, u16 *id)
 467{
 468        sata->pio = id[ATA_ID_PIO_MODES];
 469        sata->mwdma = id[ATA_ID_MWDMA_MODES];
 470        sata->udma = id[ATA_ID_UDMA_MODES];
 471        debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
 472}
 473
 474static void fsl_sata_set_features(fsl_sata_t *sata)
 475{
 476        struct sata_fis_h2d h2d, *cfis = &h2d;
 477        u8 udma_cap;
 478
 479        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 480
 481        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 482        cfis->pm_port_c = 0x80; /* is command */
 483        cfis->command = ATA_CMD_SET_FEATURES;
 484        cfis->features = SETFEATURES_XFER;
 485
 486        /* First check the device capablity */
 487        udma_cap = (u8)(sata->udma & 0xff);
 488        debug("udma_cap %02x\n\r", udma_cap);
 489
 490        if (udma_cap == ATA_UDMA6)
 491                cfis->sector_count = XFER_UDMA_6;
 492        if (udma_cap == ATA_UDMA5)
 493                cfis->sector_count = XFER_UDMA_5;
 494        if (udma_cap == ATA_UDMA4)
 495                cfis->sector_count = XFER_UDMA_4;
 496        if (udma_cap == ATA_UDMA3)
 497                cfis->sector_count = XFER_UDMA_3;
 498
 499        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 500}
 501
 502static u32 fsl_sata_rw_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt, u8 *buffer,
 503                           int is_write)
 504{
 505        struct sata_fis_h2d h2d, *cfis = &h2d;
 506        u32 block;
 507
 508        block = start;
 509
 510        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 511
 512        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 513        cfis->pm_port_c = 0x80; /* is command */
 514        cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
 515        cfis->device = ATA_LBA;
 516
 517        cfis->device |= (block >> 24) & 0xf;
 518        cfis->lba_high = (block >> 16) & 0xff;
 519        cfis->lba_mid = (block >> 8) & 0xff;
 520        cfis->lba_low = block & 0xff;
 521        cfis->sector_count = (u8)(blkcnt & 0xff);
 522
 523        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
 524        return blkcnt;
 525}
 526
 527static void fsl_sata_flush_cache(fsl_sata_t *sata)
 528{
 529        struct sata_fis_h2d h2d, *cfis = &h2d;
 530
 531        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 532
 533        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 534        cfis->pm_port_c = 0x80; /* is command */
 535        cfis->command = ATA_CMD_FLUSH;
 536
 537        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 538}
 539
 540static u32 fsl_sata_rw_cmd_ext(fsl_sata_t *sata, u32 start, u32 blkcnt,
 541                               u8 *buffer, int is_write)
 542{
 543        struct sata_fis_h2d h2d, *cfis = &h2d;
 544        u64 block;
 545
 546        block = (u64)start;
 547
 548        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 549
 550        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 551        cfis->pm_port_c = 0x80; /* is command */
 552
 553        cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
 554                                 : ATA_CMD_READ_EXT;
 555
 556        cfis->lba_high_exp = (block >> 40) & 0xff;
 557        cfis->lba_mid_exp = (block >> 32) & 0xff;
 558        cfis->lba_low_exp = (block >> 24) & 0xff;
 559        cfis->lba_high = (block >> 16) & 0xff;
 560        cfis->lba_mid = (block >> 8) & 0xff;
 561        cfis->lba_low = block & 0xff;
 562        cfis->device = ATA_LBA;
 563        cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
 564        cfis->sector_count = blkcnt & 0xff;
 565
 566        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
 567        return blkcnt;
 568}
 569
 570static u32 fsl_sata_rw_ncq_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
 571                               u8 *buffer, int is_write)
 572{
 573        struct sata_fis_h2d h2d, *cfis = &h2d;
 574        int ncq_channel;
 575        u64 block;
 576
 577        if (sata->lba48 != 1) {
 578                printf("execute FPDMA command on non-LBA48 hard disk\n\r");
 579                return -1;
 580        }
 581
 582        block = (u64)start;
 583
 584        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 585
 586        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 587        cfis->pm_port_c = 0x80; /* is command */
 588
 589        cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
 590                                 : ATA_CMD_FPDMA_READ;
 591
 592        cfis->lba_high_exp = (block >> 40) & 0xff;
 593        cfis->lba_mid_exp = (block >> 32) & 0xff;
 594        cfis->lba_low_exp = (block >> 24) & 0xff;
 595        cfis->lba_high = (block >> 16) & 0xff;
 596        cfis->lba_mid = (block >> 8) & 0xff;
 597        cfis->lba_low = block & 0xff;
 598
 599        cfis->device = ATA_LBA;
 600        cfis->features_exp = (blkcnt >> 8) & 0xff;
 601        cfis->features = blkcnt & 0xff;
 602
 603        if (sata->queue_depth >= SATA_HC_MAX_CMD)
 604                ncq_channel = SATA_HC_MAX_CMD - 1;
 605        else
 606                ncq_channel = sata->queue_depth - 1;
 607
 608        /* Use the latest queue */
 609        fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
 610        return blkcnt;
 611}
 612
 613static void fsl_sata_flush_cache_ext(fsl_sata_t *sata)
 614{
 615        struct sata_fis_h2d h2d, *cfis = &h2d;
 616
 617        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 618
 619        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 620        cfis->pm_port_c = 0x80; /* is command */
 621        cfis->command = ATA_CMD_FLUSH_EXT;
 622
 623        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 624}
 625
 626static void fsl_sata_init_wcache(fsl_sata_t *sata, u16 *id)
 627{
 628        if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
 629                sata->wcache = 1;
 630        if (ata_id_has_flush(id))
 631                sata->flush = 1;
 632        if (ata_id_has_flush_ext(id))
 633                sata->flush_ext = 1;
 634}
 635
 636static u32 ata_low_level_rw_lba48(fsl_sata_t *sata, u32 blknr, lbaint_t blkcnt,
 637                                  const void *buffer, int is_write)
 638{
 639        u32 start, blks;
 640        u8 *addr;
 641        int max_blks;
 642
 643        start = blknr;
 644        blks = blkcnt;
 645        addr = (u8 *)buffer;
 646
 647        max_blks = ATA_MAX_SECTORS_LBA48;
 648        do {
 649                if (blks > max_blks) {
 650                        if (sata->dma_flag != FLAGS_FPDMA)
 651                                fsl_sata_rw_cmd_ext(sata, start, max_blks, addr,
 652                                                    is_write);
 653                        else
 654                                fsl_sata_rw_ncq_cmd(sata, start, max_blks, addr,
 655                                                    is_write);
 656                        start += max_blks;
 657                        blks -= max_blks;
 658                        addr += ATA_SECT_SIZE * max_blks;
 659                } else {
 660                        if (sata->dma_flag != FLAGS_FPDMA)
 661                                fsl_sata_rw_cmd_ext(sata, start, blks, addr,
 662                                                    is_write);
 663                        else
 664                                fsl_sata_rw_ncq_cmd(sata, start, blks, addr,
 665                                                    is_write);
 666                        start += blks;
 667                        blks = 0;
 668                        addr += ATA_SECT_SIZE * blks;
 669                }
 670        } while (blks != 0);
 671
 672        return blkcnt;
 673}
 674
 675static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt,
 676                                  const void *buffer, int is_write)
 677{
 678        u32 start, blks;
 679        u8 *addr;
 680        int max_blks;
 681
 682        start = blknr;
 683        blks = blkcnt;
 684        addr = (u8 *)buffer;
 685
 686        max_blks = ATA_MAX_SECTORS;
 687        do {
 688                if (blks > max_blks) {
 689                        fsl_sata_rw_cmd(sata, start, max_blks, addr, is_write);
 690                        start += max_blks;
 691                        blks -= max_blks;
 692                        addr += ATA_SECT_SIZE * max_blks;
 693                } else {
 694                        fsl_sata_rw_cmd(sata, start, blks, addr, is_write);
 695                        start += blks;
 696                        blks = 0;
 697                        addr += ATA_SECT_SIZE * blks;
 698                }
 699        } while (blks != 0);
 700
 701        return blkcnt;
 702}
 703
 704/*
 705 * SATA interface between low level driver and command layer
 706 */
 707static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
 708                       void *buffer)
 709{
 710        struct fsl_ata_priv *priv = dev_get_plat(dev);
 711        fsl_sata_t *sata = priv->fsl_sata;
 712        u32 rc;
 713
 714        if (sata->lba48)
 715                rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
 716                                            READ_CMD);
 717        else
 718                rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
 719                                            READ_CMD);
 720        return rc;
 721}
 722
 723static ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
 724                        const void *buffer)
 725{
 726        struct fsl_ata_priv *priv = dev_get_plat(dev);
 727        fsl_sata_t *sata = priv->fsl_sata;
 728        u32 rc;
 729
 730        if (sata->lba48) {
 731                rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
 732                                            WRITE_CMD);
 733                if (sata->wcache && sata->flush_ext)
 734                        fsl_sata_flush_cache_ext(sata);
 735        } else {
 736                rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
 737                                            WRITE_CMD);
 738                if (sata->wcache && sata->flush)
 739                        fsl_sata_flush_cache(sata);
 740        }
 741        return rc;
 742}
 743
 744static void fsl_sata_identify(fsl_sata_t *sata, u16 *id)
 745{
 746        struct sata_fis_h2d h2d, *cfis = &h2d;
 747
 748        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 749
 750        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 751        cfis->pm_port_c = 0x80; /* is command */
 752        cfis->command = ATA_CMD_ID_ATA;
 753
 754        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
 755        ata_swap_buf_le16(id, ATA_ID_WORDS);
 756}
 757
 758static int scan_sata(struct udevice *dev)
 759{
 760        struct blk_desc *desc = dev_get_uclass_plat(dev);
 761        struct fsl_ata_priv *priv = dev_get_plat(dev);
 762        fsl_sata_t *sata = priv->fsl_sata;
 763
 764        unsigned char serial[ATA_ID_SERNO_LEN + 1];
 765        unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
 766        unsigned char product[ATA_ID_PROD_LEN + 1];
 767        u16 *id;
 768        u64 n_sectors;
 769
 770        /* if no detected link */
 771        if (!sata->link)
 772                return -1;
 773
 774        id = (u16 *)malloc(ATA_ID_WORDS * 2);
 775        if (!id) {
 776                printf("id malloc failed\n\r");
 777                return -1;
 778        }
 779
 780        /* Identify device to get information */
 781        fsl_sata_identify(sata, id);
 782
 783        /* Serial number */
 784        ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
 785
 786        /* Firmware version */
 787        ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
 788
 789        /* Product model */
 790        ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
 791
 792        /* Totoal sectors */
 793        n_sectors = ata_id_n_sectors(id);
 794
 795#ifdef CONFIG_LBA48
 796        /* Check if support LBA48 */
 797        if (ata_id_has_lba48(id)) {
 798                sata->lba48 = 1;
 799                debug("Device support LBA48\n\r");
 800        } else
 801                debug("Device supports LBA28\n\r");
 802#endif
 803
 804        memcpy(desc->product, serial, sizeof(serial));
 805        memcpy(desc->revision, firmware, sizeof(firmware));
 806        memcpy(desc->vendor, product, sizeof(product));
 807        desc->lba = n_sectors;
 808#ifdef CONFIG_LBA48
 809        desc->lba48 = sata->lba48;
 810#endif
 811
 812        /* Get the NCQ queue depth from device */
 813        sata->queue_depth = ata_id_queue_depth(id);
 814
 815        /* Get the xfer mode from device */
 816        fsl_sata_xfer_mode(sata, id);
 817
 818        /* Get the write cache status from device */
 819        fsl_sata_init_wcache(sata, id);
 820
 821        /* Set the xfer mode to highest speed */
 822        fsl_sata_set_features(sata);
 823
 824#ifdef DEBUG
 825        ata_dump_id(id);
 826#endif
 827        free((void *)id);
 828        return 0;
 829}
 830
 831static const struct blk_ops sata_fsl_blk_ops = {
 832        .read   = sata_read,
 833        .write  = sata_write,
 834};
 835
 836U_BOOT_DRIVER(sata_fsl_driver) = {
 837        .name = "sata_fsl_blk",
 838        .id = UCLASS_BLK,
 839        .ops = &sata_fsl_blk_ops,
 840        .plat_auto      = sizeof(struct fsl_ata_priv),
 841};
 842
 843static int fsl_ata_of_to_plat(struct udevice *dev)
 844{
 845        struct fsl_ata_priv *priv = dev_get_priv(dev);
 846
 847        priv->number = dev_read_u32_default(dev, "sata-number", -1);
 848        priv->flag = dev_read_u32_default(dev, "sata-fpdma", -1);
 849        priv->offset = dev_read_u32_default(dev, "sata-offset", -1);
 850
 851        priv->base = dev_read_addr(dev);
 852        if (priv->base == FDT_ADDR_T_NONE)
 853                return -EINVAL;
 854
 855        return 0;
 856}
 857
 858static int fsl_unbind_device(struct udevice *dev)
 859{
 860        int ret;
 861
 862        ret = device_remove(dev, DM_REMOVE_NORMAL);
 863        if (ret)
 864                return ret;
 865
 866        ret = device_unbind(dev);
 867        if (ret)
 868                return ret;
 869
 870        return 0;
 871}
 872
 873static int fsl_ata_probe(struct udevice *dev)
 874{
 875        struct fsl_ata_priv *blk_priv, *priv;
 876        struct udevice *blk;
 877        int failed_number;
 878        char sata_name[10];
 879        int nr_ports;
 880        int ret;
 881        int i;
 882
 883        failed_number = 0;
 884        priv = dev_get_priv(dev);
 885        nr_ports = priv->number;
 886        nr_ports = min(nr_ports, CONFIG_SYS_SATA_MAX_DEVICE);
 887
 888        for (i = 0; i < nr_ports; i++) {
 889                snprintf(sata_name, sizeof(sata_name), "fsl_sata%d", i);
 890                ret = blk_create_devicef(dev, "sata_fsl_blk", sata_name,
 891                                         UCLASS_AHCI, -1, 512, 0, &blk);
 892                if (ret) {
 893                        debug("Can't create device\n");
 894                        return ret;
 895                }
 896
 897                /* Init SATA port */
 898                ret = init_sata(priv, i);
 899                if (ret) {
 900                        debug("%s: Failed to init sata\n", __func__);
 901                        ret = fsl_unbind_device(blk);
 902                        if (ret)
 903                                return ret;
 904
 905                        failed_number++;
 906                        continue;
 907                }
 908
 909                blk_priv = dev_get_plat(blk);
 910                blk_priv->fsl_sata = priv->fsl_sata;
 911                /* Scan SATA port */
 912                ret = scan_sata(blk);
 913                if (ret) {
 914                        debug("%s: Failed to scan bus\n", __func__);
 915                        ret = fsl_unbind_device(blk);
 916                        if (ret)
 917                                return ret;
 918
 919                        failed_number++;
 920                        continue;
 921                }
 922
 923                ret = device_probe(dev);
 924                if (ret < 0) {
 925                        debug("Probing %s failed (%d)\n", dev->name, ret);
 926                        ret = fsl_unbind_device(blk);
 927                        if (ret)
 928                                return ret;
 929
 930                        failed_number++;
 931                        continue;
 932                }
 933        }
 934
 935        if (failed_number == nr_ports)
 936                return -ENODEV;
 937        else
 938                return 0;
 939}
 940
 941static int fsl_ata_remove(struct udevice *dev)
 942{
 943        fsl_sata_t *sata;
 944        struct fsl_ata_priv *priv;
 945
 946        priv = dev_get_priv(dev);
 947        sata = priv->fsl_sata;
 948
 949        free(sata->cmd_hdr_tbl_offset);
 950        free(sata->cmd_desc_offset);
 951        free(sata);
 952
 953        return 0;
 954}
 955
 956static int sata_fsl_scan(struct udevice *dev)
 957{
 958        /* Nothing to do here */
 959
 960        return 0;
 961}
 962
 963struct ahci_ops sata_fsl_ahci_ops = {
 964        .scan = sata_fsl_scan,
 965};
 966
 967static const struct udevice_id fsl_ata_ids[] = {
 968        { .compatible = "fsl,pq-sata-v2" },
 969        { }
 970};
 971
 972U_BOOT_DRIVER(fsl_ahci) = {
 973        .name   = "fsl_ahci",
 974        .id = UCLASS_AHCI,
 975        .of_match = fsl_ata_ids,
 976        .ops = &sata_fsl_ahci_ops,
 977        .of_to_plat = fsl_ata_of_to_plat,
 978        .probe  = fsl_ata_probe,
 979        .remove = fsl_ata_remove,
 980        .priv_auto      = sizeof(struct fsl_ata_priv),
 981};
 982