1/* SPDX-License-Identifier: GPL-2.0 */ 2/****************************************************************** 3 * Copyright 2008 Mentor Graphics Corporation 4 * Copyright (C) 2008 by Texas Instruments 5 * 6 * This file is part of the Inventra Controller Driver for Linux. 7 ******************************************************************/ 8 9#ifndef __MUSB_HDRC_DEFS_H__ 10#define __MUSB_HDRC_DEFS_H__ 11 12#include <usb_defs.h> 13#include <asm/io.h> 14 15#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */ 16 17/* EP0 */ 18struct musb_ep0_regs { 19 u16 reserved4; 20 u16 csr0; 21 u16 reserved5; 22 u16 reserved6; 23 u16 count0; 24 u8 host_type0; 25 u8 host_naklimit0; 26 u8 reserved7; 27 u8 reserved8; 28 u8 reserved9; 29 u8 configdata; 30}; 31 32/* EP 1-15 */ 33struct musb_epN_regs { 34 u16 txmaxp; 35 u16 txcsr; 36 u16 rxmaxp; 37 u16 rxcsr; 38 u16 rxcount; 39 u8 txtype; 40 u8 txinterval; 41 u8 rxtype; 42 u8 rxinterval; 43 u8 reserved0; 44 u8 fifosize; 45}; 46 47/* Mentor USB core register overlay structure */ 48#ifndef musb_regs 49struct musb_regs { 50 /* common registers */ 51 u8 faddr; 52 u8 power; 53 u16 intrtx; 54 u16 intrrx; 55 u16 intrtxe; 56 u16 intrrxe; 57 u8 intrusb; 58 u8 intrusbe; 59 u16 frame; 60 u8 index; 61 u8 testmode; 62 /* indexed registers */ 63 u16 txmaxp; 64 u16 txcsr; 65 u16 rxmaxp; 66 u16 rxcsr; 67 u16 rxcount; 68 u8 txtype; 69 u8 txinterval; 70 u8 rxtype; 71 u8 rxinterval; 72 u8 reserved0; 73 u8 fifosize; 74 /* fifo */ 75 u32 fifox[16]; 76 /* OTG, dynamic FIFO, version & vendor registers */ 77 u8 devctl; 78 u8 reserved1; 79 u8 txfifosz; 80 u8 rxfifosz; 81 u16 txfifoadd; 82 u16 rxfifoadd; 83 u32 vcontrol; 84 u16 hwvers; 85 u16 reserved2a[1]; 86 u8 ulpi_busctl; 87 u8 reserved2b[1]; 88 u16 reserved2[3]; 89 u8 epinfo; 90 u8 raminfo; 91 u8 linkinfo; 92 u8 vplen; 93 u8 hseof1; 94 u8 fseof1; 95 u8 lseof1; 96 u8 reserved3; 97 /* target address registers */ 98 struct musb_tar_regs { 99 u8 txfuncaddr; 100 u8 reserved0; 101 u8 txhubaddr; 102 u8 txhubport; 103 u8 rxfuncaddr; 104 u8 reserved1; 105 u8 rxhubaddr; 106 u8 rxhubport; 107 } tar[16]; 108 /* 109 * endpoint registers 110 * ep0 elements are valid when array index is 0 111 * otherwise epN is valid 112 */ 113 union musb_ep_regs { 114 struct musb_ep0_regs ep0; 115 struct musb_epN_regs epN; 116 } ep[16]; 117 118} __attribute__((packed)); 119#endif 120 121/* 122 * MUSB Register bits 123 */ 124 125/* POWER */ 126#define MUSB_POWER_ISOUPDATE 0x80 127#define MUSB_POWER_SOFTCONN 0x40 128#define MUSB_POWER_HSENAB 0x20 129#define MUSB_POWER_HSMODE 0x10 130#define MUSB_POWER_RESET 0x08 131#define MUSB_POWER_RESUME 0x04 132#define MUSB_POWER_SUSPENDM 0x02 133#define MUSB_POWER_ENSUSPEND 0x01 134#define MUSB_POWER_HSMODE_SHIFT 4 135 136/* INTRUSB */ 137#define MUSB_INTR_SUSPEND 0x01 138#define MUSB_INTR_RESUME 0x02 139#define MUSB_INTR_RESET 0x04 140#define MUSB_INTR_BABBLE 0x04 141#define MUSB_INTR_SOF 0x08 142#define MUSB_INTR_CONNECT 0x10 143#define MUSB_INTR_DISCONNECT 0x20 144#define MUSB_INTR_SESSREQ 0x40 145#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */ 146 147/* DEVCTL */ 148#define MUSB_DEVCTL_BDEVICE 0x80 149#define MUSB_DEVCTL_FSDEV 0x40 150#define MUSB_DEVCTL_LSDEV 0x20 151#define MUSB_DEVCTL_VBUS 0x18 152#define MUSB_DEVCTL_VBUS_SHIFT 3 153#define MUSB_DEVCTL_HM 0x04 154#define MUSB_DEVCTL_HR 0x02 155#define MUSB_DEVCTL_SESSION 0x01 156 157/* ULPI VBUSCONTROL */ 158#define ULPI_USE_EXTVBUS 0x01 159#define ULPI_USE_EXTVBUSIND 0x02 160 161/* TESTMODE */ 162#define MUSB_TEST_FORCE_HOST 0x80 163#define MUSB_TEST_FIFO_ACCESS 0x40 164#define MUSB_TEST_FORCE_FS 0x20 165#define MUSB_TEST_FORCE_HS 0x10 166#define MUSB_TEST_PACKET 0x08 167#define MUSB_TEST_K 0x04 168#define MUSB_TEST_J 0x02 169#define MUSB_TEST_SE0_NAK 0x01 170 171/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */ 172#define MUSB_FIFOSZ_DPB 0x10 173/* Allocation size (8, 16, 32, ... 4096) */ 174#define MUSB_FIFOSZ_SIZE 0x0f 175 176/* CSR0 */ 177#define MUSB_CSR0_FLUSHFIFO 0x0100 178#define MUSB_CSR0_TXPKTRDY 0x0002 179#define MUSB_CSR0_RXPKTRDY 0x0001 180 181/* CSR0 in Peripheral mode */ 182#define MUSB_CSR0_P_SVDSETUPEND 0x0080 183#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040 184#define MUSB_CSR0_P_SENDSTALL 0x0020 185#define MUSB_CSR0_P_SETUPEND 0x0010 186#define MUSB_CSR0_P_DATAEND 0x0008 187#define MUSB_CSR0_P_SENTSTALL 0x0004 188 189/* CSR0 in Host mode */ 190#define MUSB_CSR0_H_DIS_PING 0x0800 191#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */ 192#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */ 193#define MUSB_CSR0_H_NAKTIMEOUT 0x0080 194#define MUSB_CSR0_H_STATUSPKT 0x0040 195#define MUSB_CSR0_H_REQPKT 0x0020 196#define MUSB_CSR0_H_ERROR 0x0010 197#define MUSB_CSR0_H_SETUPPKT 0x0008 198#define MUSB_CSR0_H_RXSTALL 0x0004 199 200/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */ 201#define MUSB_CSR0_P_WZC_BITS \ 202 (MUSB_CSR0_P_SENTSTALL) 203#define MUSB_CSR0_H_WZC_BITS \ 204 (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \ 205 | MUSB_CSR0_RXPKTRDY) 206 207/* TxType/RxType */ 208#define MUSB_TYPE_SPEED 0xc0 209#define MUSB_TYPE_SPEED_SHIFT 6 210#define MUSB_TYPE_SPEED_HIGH 1 211#define MUSB_TYPE_SPEED_FULL 2 212#define MUSB_TYPE_SPEED_LOW 3 213#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */ 214#define MUSB_TYPE_PROTO_SHIFT 4 215#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */ 216#define MUSB_TYPE_PROTO_BULK 2 217#define MUSB_TYPE_PROTO_INTR 3 218 219/* CONFIGDATA */ 220#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */ 221#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */ 222#define MUSB_CONFIGDATA_BIGENDIAN 0x20 223#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */ 224#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */ 225#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */ 226#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */ 227#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */ 228 229/* TXCSR in Peripheral and Host mode */ 230#define MUSB_TXCSR_AUTOSET 0x8000 231#define MUSB_TXCSR_MODE 0x2000 232#define MUSB_TXCSR_DMAENAB 0x1000 233#define MUSB_TXCSR_FRCDATATOG 0x0800 234#define MUSB_TXCSR_DMAMODE 0x0400 235#define MUSB_TXCSR_CLRDATATOG 0x0040 236#define MUSB_TXCSR_FLUSHFIFO 0x0008 237#define MUSB_TXCSR_FIFONOTEMPTY 0x0002 238#define MUSB_TXCSR_TXPKTRDY 0x0001 239 240/* TXCSR in Peripheral mode */ 241#define MUSB_TXCSR_P_ISO 0x4000 242#define MUSB_TXCSR_P_INCOMPTX 0x0080 243#define MUSB_TXCSR_P_SENTSTALL 0x0020 244#define MUSB_TXCSR_P_SENDSTALL 0x0010 245#define MUSB_TXCSR_P_UNDERRUN 0x0004 246 247/* TXCSR in Host mode */ 248#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200 249#define MUSB_TXCSR_H_DATATOGGLE 0x0100 250#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080 251#define MUSB_TXCSR_H_RXSTALL 0x0020 252#define MUSB_TXCSR_H_ERROR 0x0004 253#define MUSB_TXCSR_H_DATATOGGLE_SHIFT 8 254 255/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */ 256#define MUSB_TXCSR_P_WZC_BITS \ 257 (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \ 258 | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY) 259#define MUSB_TXCSR_H_WZC_BITS \ 260 (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \ 261 | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY) 262 263/* RXCSR in Peripheral and Host mode */ 264#define MUSB_RXCSR_AUTOCLEAR 0x8000 265#define MUSB_RXCSR_DMAENAB 0x2000 266#define MUSB_RXCSR_DISNYET 0x1000 267#define MUSB_RXCSR_PID_ERR 0x1000 268#define MUSB_RXCSR_DMAMODE 0x0800 269#define MUSB_RXCSR_INCOMPRX 0x0100 270#define MUSB_RXCSR_CLRDATATOG 0x0080 271#define MUSB_RXCSR_FLUSHFIFO 0x0010 272#define MUSB_RXCSR_DATAERROR 0x0008 273#define MUSB_RXCSR_FIFOFULL 0x0002 274#define MUSB_RXCSR_RXPKTRDY 0x0001 275 276/* RXCSR in Peripheral mode */ 277#define MUSB_RXCSR_P_ISO 0x4000 278#define MUSB_RXCSR_P_SENTSTALL 0x0040 279#define MUSB_RXCSR_P_SENDSTALL 0x0020 280#define MUSB_RXCSR_P_OVERRUN 0x0004 281 282/* RXCSR in Host mode */ 283#define MUSB_RXCSR_H_AUTOREQ 0x4000 284#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400 285#define MUSB_RXCSR_H_DATATOGGLE 0x0200 286#define MUSB_RXCSR_H_RXSTALL 0x0040 287#define MUSB_RXCSR_H_REQPKT 0x0020 288#define MUSB_RXCSR_H_ERROR 0x0004 289#define MUSB_S_RXCSR_H_DATATOGGLE 9 290 291/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */ 292#define MUSB_RXCSR_P_WZC_BITS \ 293 (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \ 294 | MUSB_RXCSR_RXPKTRDY) 295#define MUSB_RXCSR_H_WZC_BITS \ 296 (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \ 297 | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY) 298 299/* HUBADDR */ 300#define MUSB_HUBADDR_MULTI_TT 0x80 301 302/* Endpoint configuration information. Note: The value of endpoint fifo size 303 * element should be either 8,16,32,64,128,256,512,1024,2048 or 4096. Other 304 * values are not supported 305 */ 306struct musb_epinfo { 307 u8 epnum; /* endpoint number */ 308 u8 epdir; /* endpoint direction */ 309 u16 epsize; /* endpoint FIFO size */ 310}; 311 312/* 313 * Platform specific MUSB configuration. Any platform using the musb 314 * functionality should create one instance of this structure in the 315 * platform specific file. 316 */ 317struct musb_config { 318 struct musb_regs *regs; 319 u32 timeout; 320 u8 musb_speed; 321 u8 extvbus; 322}; 323 324/* externally defined data */ 325extern struct musb_config musb_cfg; 326extern struct musb_regs *musbr; 327 328/* exported functions */ 329extern void musb_start(void); 330extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt); 331extern void write_fifo(u8 ep, u32 length, void *fifo_data); 332extern void read_fifo(u8 ep, u32 length, void *fifo_data); 333 334static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr) 335{ 336 return readb(&musbr->ulpi_busctl); 337} 338static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val) 339{ 340 writeb(val, &musbr->ulpi_busctl); 341} 342 343#endif /* __MUSB_HDRC_DEFS_H__ */ 344