LXR uboot/include/configs/synquacer.h

   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * Copyright (C) 2016-2017 Socionext Inc.
   4 */
   5#ifndef __CONFIG_H
   6#define __CONFIG_H
   7
   8/* Timers for fasp(TIMCLK) */
   9#define CONFIG_SYS_TIMERBASE            0x31080000      /* AP Timer 1 (ARM-SP804) */
  10
  11/*
  12 * SDRAM (for initialize)
  13 */
  14#define CONFIG_SYS_SDRAM_BASE           (0x80000000)    /* Start address of DDR3 */
  15#define PHYS_SDRAM_SIZE                 (0x7c000000)    /* Default size (2GB - Secure memory) */
  16
  17#define CONFIG_VERY_BIG_RAM                             /* SynQuacer supports up to 64GB */
  18#define CONFIG_MAX_MEM_MAPPED           PHYS_SDRAM_SIZE
  19
  20#define SQ_DRAMINFO_BASE                (0x2e00ffc0)    /* DRAM info from TF-A */
  21
  22/*
  23 * Boot info
  24 */
  25
  26/*
  27 * Hardware drivers support
  28 */
  29
  30/* RTC */
  31#define CONFIG_SYS_I2C_RTC_ADDR         0x51
  32
  33/* Serial (pl011)       */
  34#define UART_CLK                        (62500000)
  35#define CONFIG_PL011_CLOCK              UART_CLK
  36#define CONFIG_PL01x_PORTS              {(void *)(0x2a400000)}
  37
  38/* Support MTD */
  39#define CONFIG_SYS_FLASH_BASE           (0x08000000)
  40#define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
  41
  42/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
  43
  44#define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                            \
  45                        "mtd nor1=u-boot.bin raw 200000 100000;"        \
  46                        "fip.bin raw 180000 78000;"                     \
  47                        "optee.bin raw 500000 100000\0"
  48
  49/* GUIDs for capsule updatable firmware images */
  50#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
  51        EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
  52                 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
  53
  54#define DEVELOPERBOX_FIP_IMAGE_GUID \
  55        EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
  56                 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
  57
  58#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
  59        EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
  60                 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
  61
  62/* Distro boot settings */
  63#ifdef CONFIG_CMD_USB
  64#define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  65#else
  66#define BOOT_TARGET_DEVICE_USB(func)
  67#endif
  68
  69#ifdef CONFIG_CMD_MMC
  70#define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0)
  71#else
  72#define BOOT_TARGET_DEVICE_MMC(func)
  73#endif
  74
  75#ifdef CONFIG_CMD_NVME
  76#define BOOT_TARGET_DEVICE_NVME(func)   func(NVME, nvme, 0)
  77#else
  78#define BOOT_TARGET_DEVICE_NVME(func)
  79#endif
  80
  81#ifdef CONFIG_CMD_SCSI
  82#define BOOT_TARGET_DEVICE_SCSI(func)   func(SCSI, scsi, 0) func(SCSI, scsi, 1)
  83#else
  84#define BOOT_TARGET_DEVICE_SCSI(func)
  85#endif
  86
  87#define BOOT_TARGET_DEVICES(func)       \
  88        BOOT_TARGET_DEVICE_USB(func)    \
  89        BOOT_TARGET_DEVICE_MMC(func)    \
  90        BOOT_TARGET_DEVICE_SCSI(func)   \
  91        BOOT_TARGET_DEVICE_NVME(func)   \
  92
  93#include <config_distro_bootcmd.h>
  94
  95#define CONFIG_EXTRA_ENV_SETTINGS               \
  96        "fdt_addr_r=0x9fe00000\0"               \
  97        "kernel_addr_r=0x90000000\0"            \
  98        "ramdisk_addr_r=0xa0000000\0"           \
  99        "scriptaddr=0x88000000\0"               \
 100        "pxefile_addr_r=0x88100000\0"           \
 101        DEFAULT_DFU_ALT_INFO                    \
 102        BOOTENV
 103
 104#endif /* __CONFIG_H */
 105