1
2
3
4
5#include <common.h>
6#include <dm.h>
7#include <image.h>
8#include <init.h>
9#include <log.h>
10#include <spl.h>
11#include <fsl_esdhc.h>
12#include <asm/global_data.h>
13
14#include <asm/io.h>
15#include <asm/gpio.h>
16#include <asm/arch/clock.h>
17#include <asm/arch/sci/sci.h>
18#include <asm/arch/imx8-pins.h>
19#include <asm/arch/iomux.h>
20
21DECLARE_GLOBAL_DATA_PTR;
22
23#define ESDHC_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
24 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
25 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
26 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
27
28#define ESDHC_CLK_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
29 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
30 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
31 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
32
33#define ENET_INPUT_PAD_CTRL ((SC_PAD_CONFIG_OD_IN << PADRING_CONFIG_SHIFT) | \
34 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
35 (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | \
36 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
37
38#define ENET_NORMAL_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
39 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
40 (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | \
41 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
42
43#define FSPI_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
44 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
45 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
46 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
47
48#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
49 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
50 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
51 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
52
53#define I2C_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
54 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
55 (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
56 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
57
58#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
59 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
60 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
61 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
62#ifdef CONFIG_FSL_ESDHC
63
64#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 22)
65#define USDHC2_CD_GPIO IMX_GPIO_NR(4, 12)
66
67static struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = {
68 {USDHC1_BASE_ADDR, 0, 8},
69 {USDHC2_BASE_ADDR, 0, 4},
70 {USDHC3_BASE_ADDR, 0, 4},
71};
72
73static iomux_cfg_t emmc0[] = {
74 SC_P_EMMC0_CLK | MUX_PAD_CTRL(ESDHC_CLK_PAD_CTRL),
75 SC_P_EMMC0_CMD | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
76 SC_P_EMMC0_DATA0 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
77 SC_P_EMMC0_DATA1 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
78 SC_P_EMMC0_DATA2 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
79 SC_P_EMMC0_DATA3 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
80 SC_P_EMMC0_DATA4 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
81 SC_P_EMMC0_DATA5 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
82 SC_P_EMMC0_DATA6 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
83 SC_P_EMMC0_DATA7 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
84 SC_P_EMMC0_RESET_B | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
85 SC_P_EMMC0_STROBE | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
86};
87
88static iomux_cfg_t usdhc2_sd[] = {
89 SC_P_USDHC2_CLK | MUX_PAD_CTRL(ESDHC_CLK_PAD_CTRL),
90 SC_P_USDHC2_CMD | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
91 SC_P_USDHC2_DATA0 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
92 SC_P_USDHC2_DATA1 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
93 SC_P_USDHC2_DATA2 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
94 SC_P_USDHC2_DATA3 | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
95 SC_P_USDHC2_RESET_B | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
96 SC_P_USDHC2_WP | MUX_MODE_ALT(3) | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
97 SC_P_USDHC2_CD_B | MUX_MODE_ALT(3) | MUX_PAD_CTRL(ESDHC_PAD_CTRL),
98};
99
100int board_mmc_init(struct bd_info *bis)
101{
102 int i, ret;
103
104
105
106
107
108
109
110
111 for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) {
112 switch (i) {
113 case 0:
114 ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_0, SC_PM_PW_MODE_ON);
115 if (ret != SC_ERR_NONE)
116 return ret;
117
118 imx8_iomux_setup_multiple_pads(emmc0, ARRAY_SIZE(emmc0));
119 init_clk_usdhc(0);
120 usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
121 break;
122 case 1:
123 ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_2, SC_PM_PW_MODE_ON);
124 if (ret != SC_ERR_NONE)
125 return ret;
126 ret = sc_pm_set_resource_power_mode(-1, SC_R_GPIO_4, SC_PM_PW_MODE_ON);
127 if (ret != SC_ERR_NONE)
128 return ret;
129
130 imx8_iomux_setup_multiple_pads(usdhc2_sd, ARRAY_SIZE(usdhc2_sd));
131 init_clk_usdhc(2);
132 usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
133 gpio_request(USDHC2_CD_GPIO, "sd2_cd");
134 gpio_direction_input(USDHC2_CD_GPIO);
135 break;
136 default:
137 printf("Warning: you configured more USDHC controllers"
138 "(%d) than supported by the board\n", i + 1);
139 return 0;
140 }
141 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
142 if (ret) {
143 printf("Warning: failed to initialize mmc dev %d\n", i);
144 return ret;
145 }
146 }
147
148 return 0;
149}
150
151int board_mmc_getcd(struct mmc *mmc)
152{
153 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
154 int ret = 0;
155
156 switch (cfg->esdhc_base) {
157 case USDHC1_BASE_ADDR:
158 ret = 1;
159 break;
160 case USDHC2_BASE_ADDR:
161 ret = !gpio_get_value(USDHC1_CD_GPIO);
162 break;
163 case USDHC3_BASE_ADDR:
164 ret = !gpio_get_value(USDHC2_CD_GPIO);
165 break;
166 }
167
168 return ret;
169}
170
171#endif
172
173void spl_board_init(void)
174{
175#if defined(CONFIG_SPL_SPI)
176 if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
177 if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_ON)) {
178 puts("Warning: failed to initialize FSPI0\n");
179 }
180 }
181#endif
182
183 puts("Normal Boot\n");
184}
185
186void spl_board_prepare_for_boot(void)
187{
188#if defined(CONFIG_SPL_SPI)
189 if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
190 if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_OFF)) {
191 puts("Warning: failed to turn off FSPI0\n");
192 }
193 }
194#endif
195}
196
197#ifdef CONFIG_SPL_LOAD_FIT
198int board_fit_config_name_match(const char *name)
199{
200
201 debug("%s: %s\n", __func__, name);
202
203 return 0;
204}
205#endif
206
207void board_init_f(ulong dummy)
208{
209
210 memset((void *)gd, 0, sizeof(gd_t));
211
212 arch_cpu_init();
213
214 board_early_init_f();
215
216 timer_init();
217
218 preloader_console_init();
219
220
221 memset(__bss_start, 0, __bss_end - __bss_start);
222
223 board_init_r(NULL, 0);
224}
225
