// SPDX-License-Identifier: Intel
/*
 * Copyright (C) 2013, Intel Corporation
 * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
 *
 * Ported from Intel released Quark UEFI BIOS
 * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
 */

#include <common.h>
#include <hang.h>
#include <asm/arch/device.h>
#include <asm/arch/mrc.h>
#include <asm/arch/msg_port.h>
#include <asm/arch/quark.h>
#include "mrc_util.h"
#include "hte.h"
#include "smc.h"

static const uint8_t vref_codes[64] = {
        /* lowest to highest */
        0x3f, 0x3e, 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38,
        0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x30,
        0x2f, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28,
        0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20,
        0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
        0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
        0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
        0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
};

void mrc_write_mask(u32 unit, u32 addr, u32 data, u32 mask)
{
        msg_port_write(unit, addr,
                       (msg_port_read(unit, addr) & ~(mask)) |
                       ((data) & (mask)));
}

void mrc_alt_write_mask(u32 unit, u32 addr, u32 data, u32 mask)
{
        msg_port_alt_write(unit, addr,
                           (msg_port_alt_read(unit, addr) & ~(mask)) |
                           ((data) & (mask)));
}

void mrc_post_code(uint8_t major, uint8_t minor)
{
        /* send message to UART */
        DPF(D_INFO, "POST: 0x%01x%02x\n", major, minor);

        /* error check */
        if (major == 0xee)
                hang();
}

/* Delay number of nanoseconds */
void delay_n(uint32_t ns)
{
        /* 1000 MHz clock has 1ns period --> no conversion required */
        uint64_t final_tsc = rdtsc();

        final_tsc += ((get_tbclk_mhz() * ns) / 1000);

        while (rdtsc() < final_tsc)
                ;
}

/* Delay number of microseconds */
void delay_u(uint32_t ms)
{
        /* 64-bit math is not an option, just use loops */
        while (ms--)
                delay_n(1000);
}

/* Select Memory Manager as the source for PRI interface */
void select_mem_mgr(void)
{
        u32 dco;

        ENTERFN();

        dco = msg_port_read(MEM_CTLR, DCO);
        dco &= ~DCO_PMICTL;
        msg_port_write(MEM_CTLR, DCO, dco);

        LEAVEFN();
}

/* Select HTE as the source for PRI interface */
void select_hte(void)
{
        u32 dco;

        ENTERFN();

        dco = msg_port_read(MEM_CTLR, DCO);
        dco |= DCO_PMICTL;
        msg_port_write(MEM_CTLR, DCO, dco);

        LEAVEFN();
}

/*
 * Send DRAM command
 * data should be formated using DCMD_Xxxx macro or emrsXCommand structure
 */
void dram_init_command(uint32_t data)
{
        qrk_pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, data);
        qrk_pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG, 0);
        msg_port_setup(MSG_OP_DRAM_INIT, MEM_CTLR, 0);

        DPF(D_REGWR, "WR32 %03X %08X %08X\n", MEM_CTLR, 0, data);
}

/* Send DRAM wake command using special MCU side-band WAKE opcode */
void dram_wake_command(void)
{
        ENTERFN();

        msg_port_setup(MSG_OP_DRAM_WAKE, MEM_CTLR, 0);

        LEAVEFN();
}

void training_message(uint8_t channel, uint8_t rank, uint8_t byte_lane)
{
        /* send message to UART */
        DPF(D_INFO, "CH%01X RK%01X BL%01X\n", channel, rank, byte_lane);
}

/*
 * This function will program the RCVEN delays
 *
 * (currently doesn't comprehend rank)
 */
void set_rcvn(uint8_t channel, uint8_t rank,
              uint8_t byte_lane, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        DPF(D_TRN, "Rcvn ch%d rnk%d ln%d : pi=%03X\n",
            channel, rank, byte_lane, pi_count);

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[11:08] (0x0-0xF)
         * BL1 -> B01PTRCTL0[23:20] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = (byte_lane & 1) ? 0xf00000 : 0xf00;
        temp = (byte_lane & 1) ? (pi_count / HALF_CLK) << 20 :
                (pi_count / HALF_CLK) << 8;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        msk = 0x3f000000;
        temp = pi_count << 24;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * BL0/1 -> B01DBCTL1[08/11] (+1 select)
         * BL0/1 -> B01DBCTL1[02/05] (enable)
         */
        reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= (byte_lane & 1) ? (1 << 5) : (1 << 2);
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= (byte_lane & 1) ? (1 << 11) : (1 << 8);
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f) {
                training_message(channel, rank, byte_lane);
                mrc_post_code(0xee, 0xe0);
        }

        LEAVEFN();
}

/*
 * This function will return the current RCVEN delay on the given
 * channel, rank, byte_lane as an absolute PI count.
 *
 * (currently doesn't comprehend rank)
 */
uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[11:08] (0x0-0xF)
         * BL1 -> B01PTRCTL0[23:20] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= (byte_lane & 1) ? 20 : 8;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = temp * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 24;
        temp &= 0x3f;

        /* Adjust PI_COUNT */
        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the RDQS delays based on an absolute
 * amount of PIs.
 *
 * (currently doesn't comprehend rank)
 */
void set_rdqs(uint8_t channel, uint8_t rank,
              uint8_t byte_lane, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();
        DPF(D_TRN, "Rdqs ch%d rnk%d ln%d : pi=%03X\n",
            channel, rank, byte_lane, pi_count);

        /*
         * PI (1/128 MCLK)
         * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47)
         * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47)
         */
        reg = (byte_lane & 1) ? B1RXDQSPICODE : B0RXDQSPICODE;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        msk = 0x7f;
        temp = pi_count << 0;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check (shouldn't go above 0x3F) */
        if (pi_count > 0x47) {
                training_message(channel, rank, byte_lane);
                mrc_post_code(0xee, 0xe1);
        }

        LEAVEFN();
}

/*
 * This function will return the current RDQS delay on the given
 * channel, rank, byte_lane as an absolute PI count.
 *
 * (currently doesn't comprehend rank)
 */
uint32_t get_rdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * PI (1/128 MCLK)
         * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47)
         * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47)
         */
        reg = (byte_lane & 1) ? B1RXDQSPICODE : B0RXDQSPICODE;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        temp = msg_port_alt_read(DDRPHY, reg);

        /* Adjust PI_COUNT */
        pi_count = temp & 0x7f;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the WDQS delays based on an absolute
 * amount of PIs.
 *
 * (currently doesn't comprehend rank)
 */
void set_wdqs(uint8_t channel, uint8_t rank,
              uint8_t byte_lane, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        DPF(D_TRN, "Wdqs ch%d rnk%d ln%d : pi=%03X\n",
            channel, rank, byte_lane, pi_count);

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[07:04] (0x0-0xF)
         * BL1 -> B01PTRCTL0[19:16] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = (byte_lane & 1) ? 0xf0000 : 0xf0;
        temp = pi_count / HALF_CLK;
        temp <<= (byte_lane & 1) ? 16 : 4;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        msk = 0x3f0000;
        temp = pi_count << 16;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * BL0/1 -> B01DBCTL1[07/10] (+1 select)
         * BL0/1 -> B01DBCTL1[01/04] (enable)
         */
        reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= (byte_lane & 1) ? (1 << 4) : (1 << 1);
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= (byte_lane & 1) ? (1 << 10) : (1 << 7);
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f) {
                training_message(channel, rank, byte_lane);
                mrc_post_code(0xee, 0xe2);
        }

        LEAVEFN();
}

/*
 * This function will return the amount of WDQS delay on the given
 * channel, rank, byte_lane as an absolute PI count.
 *
 * (currently doesn't comprehend rank)
 */
uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[07:04] (0x0-0xF)
         * BL1 -> B01PTRCTL0[19:16] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= (byte_lane & 1) ? 16 : 4;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = (temp * HALF_CLK);

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 16;
        temp &= 0x3f;

        /* Adjust PI_COUNT */
        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the WDQ delays based on an absolute
 * number of PIs.
 *
 * (currently doesn't comprehend rank)
 */
void set_wdq(uint8_t channel, uint8_t rank,
             uint8_t byte_lane, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        DPF(D_TRN, "Wdq ch%d rnk%d ln%d : pi=%03X\n",
            channel, rank, byte_lane, pi_count);

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[03:00] (0x0-0xF)
         * BL1 -> B01PTRCTL0[15:12] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = (byte_lane & 1) ? 0xf000 : 0xf;
        temp = pi_count / HALF_CLK;
        temp <<= (byte_lane & 1) ? 12 : 0;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        msk = 0x3f00;
        temp = pi_count << 8;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * BL0/1 -> B01DBCTL1[06/09] (+1 select)
         * BL0/1 -> B01DBCTL1[00/03] (enable)
         */
        reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= (byte_lane & 1) ? (1 << 3) : (1 << 0);
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= (byte_lane & 1) ? (1 << 9) : (1 << 6);
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f) {
                training_message(channel, rank, byte_lane);
                mrc_post_code(0xee, 0xe3);
        }

        LEAVEFN();
}

/*
 * This function will return the amount of WDQ delay on the given
 * channel, rank, byte_lane as an absolute PI count.
 *
 * (currently doesn't comprehend rank)
 */
uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * BL0 -> B01PTRCTL0[03:00] (0x0-0xF)
         * BL1 -> B01PTRCTL0[15:12] (0x0-0xF)
         */
        reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= (byte_lane & 1) ? 12 : 0;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = temp * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F)
         * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F)
         */
        reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0;
        reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET +
                channel * DDRIODQ_CH_OFFSET);
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 8;
        temp &= 0x3f;

        /* Adjust PI_COUNT */
        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the WCMD delays based on an absolute
 * number of PIs.
 */
void set_wcmd(uint8_t channel, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CMDPTRREG[11:08] (0x0-0xF)
         */
        reg = CMDPTRREG + channel * DDRIOCCC_CH_OFFSET;
        msk = 0xf00;
        temp = pi_count / HALF_CLK;
        temp <<= 8;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * CMDDLLPICODER0[29:24] -> CMDSLICE R3 (unused)
         * CMDDLLPICODER0[21:16] -> CMDSLICE L3 (unused)
         * CMDDLLPICODER0[13:08] -> CMDSLICE R2 (unused)
         * CMDDLLPICODER0[05:00] -> CMDSLICE L2 (unused)
         * CMDDLLPICODER1[29:24] -> CMDSLICE R1 (unused)
         * CMDDLLPICODER1[21:16] -> CMDSLICE L1 (0x00-0x3F)
         * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused)
         * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused)
         */
        reg = CMDDLLPICODER1 + channel * DDRIOCCC_CH_OFFSET;
        msk = 0x3f3f3f3f;
        temp = (pi_count << 24) | (pi_count << 16) |
                (pi_count << 8) | (pi_count << 0);

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);
        reg = CMDDLLPICODER0 + channel * DDRIOCCC_CH_OFFSET;    /* PO */
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * CMDCFGREG0[17] (+1 select)
         * CMDCFGREG0[16] (enable)
         */
        reg = CMDCFGREG0 + channel * DDRIOCCC_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= (1 << 16);
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= (1 << 17);
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f)
                mrc_post_code(0xee, 0xe4);

        LEAVEFN();
}

/*
 * This function will return the amount of WCMD delay on the given
 * channel as an absolute PI count.
 */
uint32_t get_wcmd(uint8_t channel)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CMDPTRREG[11:08] (0x0-0xF)
         */
        reg = CMDPTRREG + channel * DDRIOCCC_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 8;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = temp * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * CMDDLLPICODER0[29:24] -> CMDSLICE R3 (unused)
         * CMDDLLPICODER0[21:16] -> CMDSLICE L3 (unused)
         * CMDDLLPICODER0[13:08] -> CMDSLICE R2 (unused)
         * CMDDLLPICODER0[05:00] -> CMDSLICE L2 (unused)
         * CMDDLLPICODER1[29:24] -> CMDSLICE R1 (unused)
         * CMDDLLPICODER1[21:16] -> CMDSLICE L1 (0x00-0x3F)
         * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused)
         * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused)
         */
        reg = CMDDLLPICODER1 + channel * DDRIOCCC_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 16;
        temp &= 0x3f;

        /* Adjust PI_COUNT */
        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the WCLK delays based on an absolute
 * number of PIs.
 */
void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CCPTRREG[15:12] -> CLK1 (0x0-0xF)
         * CCPTRREG[11:08] -> CLK0 (0x0-0xF)
         */
        reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET;
        msk = 0xff00;
        temp = ((pi_count / HALF_CLK) << 12) | ((pi_count / HALF_CLK) << 8);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * ECCB1DLLPICODER0[13:08] -> CLK0 (0x00-0x3F)
         * ECCB1DLLPICODER0[21:16] -> CLK1 (0x00-0x3F)
         */
        reg = rank ? ECCB1DLLPICODER0 : ECCB1DLLPICODER0;
        reg += (channel * DDRIOCCC_CH_OFFSET);
        msk = 0x3f3f00;
        temp = (pi_count << 16) | (pi_count << 8);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = rank ? ECCB1DLLPICODER1 : ECCB1DLLPICODER1;
        reg += (channel * DDRIOCCC_CH_OFFSET);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = rank ? ECCB1DLLPICODER2 : ECCB1DLLPICODER2;
        reg += (channel * DDRIOCCC_CH_OFFSET);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = rank ? ECCB1DLLPICODER3 : ECCB1DLLPICODER3;
        reg += (channel * DDRIOCCC_CH_OFFSET);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * CCCFGREG1[11:08] (+1 select)
         * CCCFGREG1[03:00] (enable)
         */
        reg = CCCFGREG1 + channel * DDRIOCCC_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= 0xf;
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= 0xf00;
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f)
                mrc_post_code(0xee, 0xe5);

        LEAVEFN();
}

/*
 * This function will return the amout of WCLK delay on the given
 * channel, rank as an absolute PI count.
 */
uint32_t get_wclk(uint8_t channel, uint8_t rank)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CCPTRREG[15:12] -> CLK1 (0x0-0xF)
         * CCPTRREG[11:08] -> CLK0 (0x0-0xF)
         */
        reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= rank ? 12 : 8;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = temp * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * ECCB1DLLPICODER0[13:08] -> CLK0 (0x00-0x3F)
         * ECCB1DLLPICODER0[21:16] -> CLK1 (0x00-0x3F)
         */
        reg = rank ? ECCB1DLLPICODER0 : ECCB1DLLPICODER0;
        reg += (channel * DDRIOCCC_CH_OFFSET);
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= rank ? 16 : 8;
        temp &= 0x3f;

        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the WCTL delays based on an absolute
 * number of PIs.
 *
 * (currently doesn't comprehend rank)
 */
void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count)
{
        uint32_t reg;
        uint32_t msk;
        uint32_t temp;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CCPTRREG[31:28] (0x0-0xF)
         * CCPTRREG[27:24] (0x0-0xF)
         */
        reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET;
        msk = 0xff000000;
        temp = ((pi_count / HALF_CLK) << 28) | ((pi_count / HALF_CLK) << 24);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* Adjust PI_COUNT */
        pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * ECCB1DLLPICODER?[29:24] (0x00-0x3F)
         * ECCB1DLLPICODER?[29:24] (0x00-0x3F)
         */
        reg = ECCB1DLLPICODER0 + channel * DDRIOCCC_CH_OFFSET;
        msk = 0x3f000000;
        temp = (pi_count << 24);
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = ECCB1DLLPICODER1 + channel * DDRIOCCC_CH_OFFSET;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = ECCB1DLLPICODER2 + channel * DDRIOCCC_CH_OFFSET;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        reg = ECCB1DLLPICODER3 + channel * DDRIOCCC_CH_OFFSET;
        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /*
         * DEADBAND
         * CCCFGREG1[13:12] (+1 select)
         * CCCFGREG1[05:04] (enable)
         */
        reg = CCCFGREG1 + channel * DDRIOCCC_CH_OFFSET;
        msk = 0x00;
        temp = 0x00;

        /* enable */
        msk |= 0x30;
        if ((pi_count < EARLY_DB) || (pi_count > LATE_DB))
                temp |= msk;

        /* select */
        msk |= 0x3000;
        if (pi_count < EARLY_DB)
                temp |= msk;

        mrc_alt_write_mask(DDRPHY, reg, temp, msk);

        /* error check */
        if (pi_count > 0x3f)
                mrc_post_code(0xee, 0xe6);

        LEAVEFN();
}

/*
 * This function will return the amount of WCTL delay on the given
 * channel, rank as an absolute PI count.
 *
 * (currently doesn't comprehend rank)
 */
uint32_t get_wctl(uint8_t channel, uint8_t rank)
{
        uint32_t reg;
        uint32_t temp;
        uint32_t pi_count;

        ENTERFN();

        /*
         * RDPTR (1/2 MCLK, 64 PIs)
         * CCPTRREG[31:28] (0x0-0xF)
         * CCPTRREG[27:24] (0x0-0xF)
         */
        reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 24;
        temp &= 0xf;

        /* Adjust PI_COUNT */
        pi_count = temp * HALF_CLK;

        /*
         * PI (1/64 MCLK, 1 PIs)
         * ECCB1DLLPICODER?[29:24] (0x00-0x3F)
         * ECCB1DLLPICODER?[29:24] (0x00-0x3F)
         */
        reg = ECCB1DLLPICODER0 + channel * DDRIOCCC_CH_OFFSET;
        temp = msg_port_alt_read(DDRPHY, reg);
        temp >>= 24;
        temp &= 0x3f;

        /* Adjust PI_COUNT */
        pi_count += temp;

        LEAVEFN();

        return pi_count;
}

/*
 * This function will program the internal Vref setting in a given
 * byte lane in a given channel.
 */
void set_vref(uint8_t channel, uint8_t byte_lane, uint32_t setting)
{
        uint32_t reg = (byte_lane & 0x1) ? B1VREFCTL : B0VREFCTL;

        ENTERFN();

        DPF(D_TRN, "Vref ch%d ln%d : val=%03X\n",
            channel, byte_lane, setting);

        mrc_alt_write_mask(DDRPHY, reg + channel * DDRIODQ_CH_OFFSET +
                (byte_lane >> 1) * DDRIODQ_BL_OFFSET,
                vref_codes[setting] << 2, 0xfc);

        /*
         * need to wait ~300ns for Vref to settle
         * (check that this is necessary)
         */
        delay_n(300);

        /* ??? may need to clear pointers ??? */

        LEAVEFN();
}

/*
 * This function will return the internal Vref setting for the given
 * channel, byte_lane.
 */
uint32_t get_vref(uint8_t channel, uint8_t byte_lane)
{
        uint8_t j;
        uint32_t ret_val = sizeof(vref_codes) / 2;
        uint32_t reg = (byte_lane & 0x1) ? B1VREFCTL : B0VREFCTL;
        uint32_t temp;

        ENTERFN();

        temp = msg_port_alt_read(DDRPHY, reg + channel * DDRIODQ_CH_OFFSET +
                (byte_lane >> 1) * DDRIODQ_BL_OFFSET);
        temp >>= 2;
        temp &= 0x3f;

        for (j = 0; j < sizeof(vref_codes); j++) {
                if (vref_codes[j] == temp) {
                        ret_val = j;
                        break;
                }
        }

        LEAVEFN();

        return ret_val;
}

/*
 * This function will return a 32-bit address in the desired
 * channel and rank.
 */
uint32_t get_addr(uint8_t channel, uint8_t rank)
{
        uint32_t offset = 32 * 1024 * 1024;     /* 32MB */

        /* Begin product specific code */
        if (channel > 0) {

                DPF(D_ERROR, "ILLEGAL CHANNEL\n");
                DEAD_LOOP();
        }

        if (rank > 1) {
                DPF(D_ERROR, "ILLEGAL RANK\n");
                DEAD_LOOP();
        }

        /* use 256MB lowest density as per DRP == 0x0003 */
        offset += rank * (256 * 1024 * 1024);

        return offset;
}

/*
 * This function will sample the DQTRAINSTS registers in the given
 * channel/rank SAMPLE_SIZE times looking for a valid '0' or '1'.
 *
 * It will return an encoded 32-bit date in which each bit corresponds to
 * the sampled value on the byte lane.
 */
uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel,
                    uint8_t rank, bool rcvn)
{
        uint8_t j;      /* just a counter */
        uint8_t bl;     /* which BL in the module (always 2 per module) */
        uint8_t bl_grp; /* which BL module */
        /* byte lane divisor */
        uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1;
        uint32_t msk[2];        /* BLx in module */
        /* DQTRAINSTS register contents for each sample */
        uint32_t sampled_val[SAMPLE_SIZE];
        uint32_t num_0s;        /* tracks the number of '0' samples */
        uint32_t num_1s;        /* tracks the number of '1' samples */
        uint32_t ret_val = 0x00;        /* assume all '0' samples */
        uint32_t address = get_addr(channel, rank);

        /* initialise msk[] */
        msk[0] = rcvn ? (1 << 1) : (1 << 9);    /* BL0 */
        msk[1] = rcvn ? (1 << 0) : (1 << 8);    /* BL1 */

        /* cycle through each byte lane group */
        for (bl_grp = 0; bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) {
                /* take SAMPLE_SIZE samples */
                for (j = 0; j < SAMPLE_SIZE; j++) {
                        hte_mem_op(address, mrc_params->first_run,
                                   rcvn ? 0 : 1);
                        mrc_params->first_run = 0;

                        /*
                         * record the contents of the proper
                         * DQTRAINSTS register
                         */
                        sampled_val[j] = msg_port_alt_read(DDRPHY,
                                DQTRAINSTS +
                                bl_grp * DDRIODQ_BL_OFFSET +
                                channel * DDRIODQ_CH_OFFSET);
                }

                /*
                 * look for a majority value (SAMPLE_SIZE / 2) + 1
                 * on the byte lane and set that value in the corresponding
                 * ret_val bit
                 */
                for (bl = 0; bl < 2; bl++) {
                        num_0s = 0x00;  /* reset '0' tracker for byte lane */
                        num_1s = 0x00;  /* reset '1' tracker for byte lane */
                        for (j = 0; j < SAMPLE_SIZE; j++) {
                                if (sampled_val[j] & msk[bl])
                                        num_1s++;
                                else
                                        num_0s++;
                        }
                if (num_1s > num_0s)
                        ret_val |= (1 << (bl + bl_grp * 2));
                }
        }

        /*
         * "ret_val.0" contains the status of BL0
         * "ret_val.1" contains the status of BL1
         * "ret_val.2" contains the status of BL2
         * etc.
         */
        return ret_val;
}

/* This function will find the rising edge transition on RCVN or WDQS */
void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[],
                      uint8_t channel, uint8_t rank, bool rcvn)
{
        bool all_edges_found;   /* determines stop condition */
        bool direction[NUM_BYTE_LANES]; /* direction indicator */
        uint8_t sample; /* sample counter */
        uint8_t bl;     /* byte lane counter */
        /* byte lane divisor */
        uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1;
        uint32_t sample_result[SAMPLE_CNT];     /* results of sample_dqs() */
        uint32_t temp;
        uint32_t transition_pattern;

        ENTERFN();

        /* select hte and request initial configuration */
        select_hte();
        mrc_params->first_run = 1;

        /* Take 3 sample points (T1,T2,T3) to obtain a transition pattern */
        for (sample = 0; sample < SAMPLE_CNT; sample++) {
                /* program the desired delays for sample */
                for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) {
                        /* increase sample delay by 26 PI (0.2 CLK) */
                        if (rcvn) {
                                set_rcvn(channel, rank, bl,
                                         delay[bl] + sample * SAMPLE_DLY);
                        } else {
                                set_wdqs(channel, rank, bl,
                                         delay[bl] + sample * SAMPLE_DLY);
                        }
                }

                /* take samples (Tsample_i) */
                sample_result[sample] = sample_dqs(mrc_params,
                        channel, rank, rcvn);

                DPF(D_TRN,
                    "Find rising edge %s ch%d rnk%d: #%d dly=%d dqs=%02X\n",
                    rcvn ? "RCVN" : "WDQS", channel, rank, sample,
                    sample * SAMPLE_DLY, sample_result[sample]);
        }

        /*
         * This pattern will help determine where we landed and ultimately
         * how to place RCVEN/WDQS.
         */
        for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) {
                /* build transition_pattern (MSB is 1st sample) */
                transition_pattern = 0;
                for (sample = 0; sample < SAMPLE_CNT; sample++) {
                        transition_pattern |=
                                ((sample_result[sample] & (1 << bl)) >> bl) <<
                                (SAMPLE_CNT - 1 - sample);
                }

                DPF(D_TRN, "=== transition pattern %d\n", transition_pattern);

                /*
                 * set up to look for rising edge based on
                 * transition_pattern
                 */
                switch (transition_pattern) {
                case 0: /* sampled 0->0->0 */
                        /* move forward from T3 looking for 0->1 */
                        delay[bl] += 2 * SAMPLE_DLY;
                        direction[bl] = FORWARD;
                        break;
                case 1: /* sampled 0->0->1 */
                case 5: /* sampled 1->0->1 (bad duty cycle) *HSD#237503* */
                        /* move forward from T2 looking for 0->1 */
                        delay[bl] += 1 * SAMPLE_DLY;
                        direction[bl] = FORWARD;
                        break;
                case 2: /* sampled 0->1->0 (bad duty cycle) *HSD#237503* */
                case 3: /* sampled 0->1->1 */
                        /* move forward from T1 looking for 0->1 */
                        delay[bl] += 0 * SAMPLE_DLY;
                        direction[bl] = FORWARD;
                        break;
                case 4: /* sampled 1->0->0 (assumes BL8, HSD#234975) */
                        /* move forward from T3 looking for 0->1 */
                        delay[bl] += 2 * SAMPLE_DLY;
                        direction[bl] = FORWARD;
                        break;
                case 6: /* sampled 1->1->0 */
                case 7: /* sampled 1->1->1 */
                        /* move backward from T1 looking for 1->0 */
                        delay[bl] += 0 * SAMPLE_DLY;
                        direction[bl] = BACKWARD;
                        break;
                default:
                        mrc_post_code(0xee, 0xee);
                        break;
                }

                /* program delays */
                if (rcvn)
                        set_rcvn(channel, rank, bl, delay[bl]);
                else
                        set_wdqs(channel, rank, bl, delay[bl]);
        }

        /*
         * Based on the observed transition pattern on the byte lane,
         * begin looking for a rising edge with single PI granularity.
         */
        do {
                all_edges_found = true; /* assume all byte lanes passed */
                /* take a sample */
                temp = sample_dqs(mrc_params, channel, rank, rcvn);
                /* check all each byte lane for proper edge */
                for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) {
                        if (temp & (1 << bl)) {
                                /* sampled "1" */
                                if (direction[bl] == BACKWARD) {
                                        /*
                                         * keep looking for edge
                                         * on this byte lane
                                         */
                                        all_edges_found = false;
                                        delay[bl] -= 1;
                                        if (rcvn) {
                                                set_rcvn(channel, rank,
                                                         bl, delay[bl]);
                                        } else {
                                                set_wdqs(channel, rank,
                                                         bl, delay[bl]);
                                        }
                                }
                        } else {
                                /* sampled "0" */
                                if (direction[bl] == FORWARD) {
                                        /*
                                         * keep looking for edge
                                         * on this byte lane
                                         */
                                        all_edges_found = false;
                                        delay[bl] += 1;
                                        if (rcvn) {
                                                set_rcvn(channel, rank,
                                                         bl, delay[bl]);
                                        } else {
                                                set_wdqs(channel, rank,
                                                         bl, delay[bl]);
                                        }
                                }
                        }
                }
        } while (!all_edges_found);

        /* restore DDR idle state */
        dram_init_command(DCMD_PREA(rank));

        DPF(D_TRN, "Delay %03X %03X %03X %03X\n",
            delay[0], delay[1], delay[2], delay[3]);

        LEAVEFN();
}

/*
 * This function will return a 32 bit mask that will be used to
 * check for byte lane failures.
 */
uint32_t byte_lane_mask(struct mrc_params *mrc_params)
{
        uint32_t j;
        uint32_t ret_val = 0x00;

        /*
         * set ret_val based on NUM_BYTE_LANES such that you will check
         * only BL0 in result
         *
         * (each bit in result represents a byte lane)
         */
        for (j = 0; j < MAX_BYTE_LANES; j += NUM_BYTE_LANES)
                ret_val |= (1 << ((j / NUM_BYTE_LANES) * NUM_BYTE_LANES));

        /*
         * HSD#235037
         * need to adjust the mask for 16-bit mode
         */
        if (mrc_params->channel_width == X16)
                ret_val |= (ret_val << 2);

        return ret_val;
}

/*
 * Check memory executing simple write/read/verify at the specified address.
 *
 * Bits in the result indicate failure on specific byte lane.
 */
uint32_t check_rw_coarse(struct mrc_params *mrc_params, uint32_t address)
{
        uint32_t result = 0;
        uint8_t first_run = 0;

        if (mrc_params->hte_setup) {
                mrc_params->hte_setup = 0;
                first_run = 1;
                select_hte();
        }

        result = hte_basic_write_read(mrc_params, address, first_run,
                                      WRITE_TRAIN);

        DPF(D_TRN, "check_rw_coarse result is %x\n", result);

        return result;
}

/*
 * Check memory executing write/read/verify of many data patterns
 * at the specified address. Bits in the result indicate failure
 * on specific byte lane.
 */
uint32_t check_bls_ex(struct mrc_params *mrc_params, uint32_t address)
{
        uint32_t result;
        uint8_t first_run = 0;

        if (mrc_params->hte_setup) {
                mrc_params->hte_setup = 0;
                first_run = 1;
                select_hte();
        }

        result = hte_write_stress_bit_lanes(mrc_params, address, first_run);

        DPF(D_TRN, "check_bls_ex result is %x\n", result);

        return result;
}

/*
 * 32-bit LFSR with characteristic polynomial: X^32 + X^22 +X^2 + X^1
 *
 * The function takes pointer to previous 32 bit value and
 * modifies it to next value.
 */
void lfsr32(uint32_t *lfsr_ptr)
{
        uint32_t bit;
        uint32_t lfsr;
        int i;

        lfsr = *lfsr_ptr;

        for (i = 0; i < 32; i++) {
                bit = 1 ^ (lfsr & 1);
                bit = bit ^ ((lfsr & 2) >> 1);
                bit = bit ^ ((lfsr & 4) >> 2);
                bit = bit ^ ((lfsr & 0x400000) >> 22);

                lfsr = ((lfsr >> 1) | (bit << 31));
        }

        *lfsr_ptr = lfsr;
}

/* Clear the pointers in a given byte lane in a given channel */
void clear_pointers(void)
{
        uint8_t channel;
        uint8_t bl;

        ENTERFN();

        for (channel = 0; channel < NUM_CHANNELS; channel++) {
                for (bl = 0; bl < NUM_BYTE_LANES; bl++) {
                        mrc_alt_write_mask(DDRPHY,
                                           B01PTRCTL1 +
                                           channel * DDRIODQ_CH_OFFSET +
                                           (bl >> 1) * DDRIODQ_BL_OFFSET,
                                           ~(1 << 8), (1 << 8));

                        mrc_alt_write_mask(DDRPHY,
                                           B01PTRCTL1 +
                                           channel * DDRIODQ_CH_OFFSET +
                                           (bl >> 1) * DDRIODQ_BL_OFFSET,
                                           (1 << 8), (1 << 8));
                }
        }

        LEAVEFN();
}

static void print_timings_internal(uint8_t algo, uint8_t channel, uint8_t rank,
                                   uint8_t bl_divisor)
{
        uint8_t bl;

        switch (algo) {
        case RCVN:
                DPF(D_INFO, "\nRCVN[%02d:%02d]", channel, rank);
                break;
        case WDQS:
                DPF(D_INFO, "\nWDQS[%02d:%02d]", channel, rank);
                break;
        case WDQX:
                DPF(D_INFO, "\nWDQx[%02d:%02d]", channel, rank);
                break;
        case RDQS:
                DPF(D_INFO, "\nRDQS[%02d:%02d]", channel, rank);
                break;
        case VREF:
                DPF(D_INFO, "\nVREF[%02d:%02d]", channel, rank);
                break;
        case WCMD:
                DPF(D_INFO, "\nWCMD[%02d:%02d]", channel, rank);
                break;
        case WCTL:
                DPF(D_INFO, "\nWCTL[%02d:%02d]", channel, rank);
                break;
        case WCLK:
                DPF(D_INFO, "\nWCLK[%02d:%02d]", channel, rank);
                break;
        default:
                break;
        }

        for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) {
                switch (algo) {
                case RCVN:
                        DPF(D_INFO, " %03d", get_rcvn(channel, rank, bl));
                        break;
                case WDQS:
                        DPF(D_INFO, " %03d", get_wdqs(channel, rank, bl));
                        break;
                case WDQX:
                        DPF(D_INFO, " %03d", get_wdq(channel, rank, bl));
                        break;
                case RDQS:
                        DPF(D_INFO, " %03d", get_rdqs(channel, rank, bl));
                        break;
                case VREF:
                        DPF(D_INFO, " %03d", get_vref(channel, bl));
                        break;
                case WCMD:
                        DPF(D_INFO, " %03d", get_wcmd(channel));
                        break;
                case WCTL:
                        DPF(D_INFO, " %03d", get_wctl(channel, rank));
                        break;
                case WCLK:
                        DPF(D_INFO, " %03d", get_wclk(channel, rank));
                        break;
                default:
                        break;
                }
        }
}

void print_timings(struct mrc_params *mrc_params)
{
        uint8_t algo;
        uint8_t channel;
        uint8_t rank;
        uint8_t bl_divisor = (mrc_params->channel_width == X16) ? 2 : 1;

        DPF(D_INFO, "\n---------------------------");
        DPF(D_INFO, "\nALGO[CH:RK] BL0 BL1 BL2 BL3");
        DPF(D_INFO, "\n===========================");

        for (algo = 0; algo < MAX_ALGOS; algo++) {
                for (channel = 0; channel < NUM_CHANNELS; channel++) {
                        if (mrc_params->channel_enables & (1 << channel)) {
                                for (rank = 0; rank < NUM_RANKS; rank++) {
                                        if (mrc_params->rank_enables &
                                                (1 << rank)) {
                                                print_timings_internal(algo,
                                                        channel, rank,
                                                        bl_divisor);
                                        }
                                }
                        }
                }
        }

        DPF(D_INFO, "\n---------------------------");
        DPF(D_INFO, "\n");
}