LXR uboot/include/configs/imx8mm-cl-iot-gate.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright 2019 NXP
   4 */
   5
   6#ifndef __IMX8MM_CL_IOT_GATE_H
   7#define __IMX8MM_CL_IOT_GATE_H
   8
   9#include <linux/sizes.h>
  10#include <linux/stringify.h>
  11#include <asm/arch/imx-regs.h>
  12#include <config_distro_bootcmd.h>
  13
  14#define CFG_SYS_UBOOT_BASE      \
  15        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
  16
  17#ifdef CONFIG_SPL_BUILD
  18/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  19#define CFG_MALLOC_F_ADDR               0x912000
  20/* For RAW image gives a error info not panic */
  21
  22#endif
  23
  24/* GUIDs for capsule updatable firmware images */
  25#define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
  26        EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
  27                 0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
  28
  29#define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
  30        EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
  31                 0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
  32
  33#if IS_ENABLED(CONFIG_CMD_MMC)
  34# define BOOT_TARGET_MMC(func) \
  35        func(MMC, mmc, 2)      \
  36        func(MMC, mmc, 0)
  37#else
  38# define BOOT_TARGET_MMC(func)
  39#endif
  40
  41#if IS_ENABLED(CONFIG_CMD_USB)
  42# define BOOT_TARGET_USB(func) func(USB, usb, 0)
  43#else
  44# define BOOT_TARGET_USB(func)
  45#endif
  46
  47#if CONFIG_IS_ENABLED(CMD_PXE)
  48# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
  49#else
  50# define BOOT_TARGET_PXE(func)
  51#endif
  52
  53#if CONFIG_IS_ENABLED(CMD_DHCP)
  54# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
  55#else
  56# define BOOT_TARGET_DHCP(func)
  57#endif
  58
  59#define BOOT_TARGET_DEVICES(func) \
  60        BOOT_TARGET_USB(func) \
  61        BOOT_TARGET_MMC(func) \
  62        BOOT_TARGET_PXE(func) \
  63        BOOT_TARGET_DHCP(func)
  64
  65/* Initial environment variables */
  66#define CFG_EXTRA_ENV_SETTINGS          \
  67        BOOTENV \
  68        "script=boot.scr\0" \
  69        "image=Image\0" \
  70        "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
  71        "fdt_addr=0x43000000\0"                 \
  72        "fdt_addr_r=0x43000000\0" \
  73        "boot_fit=no\0" \
  74        "dfu_alt_info=mmc 2=flash-bin raw 0x42 0x1D00 mmcpart 1\0" \
  75        "fdt_file=sb-iotgimx8.dtb\0" \
  76        "fdtfile=sb-iotgimx8.dtb\0" \
  77        "initrd_addr=0x43800000\0"              \
  78        "bootm_size=0x10000000\0" \
  79        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  80        "mmcpart=1\0" \
  81        "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
  82        "mmcautodetect=yes\0" \
  83        "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  84        "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  85        "bootscript=echo Running bootscript from mmc ...; " \
  86                "source\0" \
  87        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  88        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  89        "kernel_addr_r=0x40480000\0" \
  90        "pxefile_addr_r=0x40480000\0" \
  91        "ramdisk_addr_r=0x43800000\0" \
  92        "mmcboot=echo Booting from mmc ...; " \
  93                "run mmcargs; " \
  94                "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
  95                        "bootm ${loadaddr}; " \
  96                "else " \
  97                        "if run loadfdt; then " \
  98                                "booti ${loadaddr} - ${fdt_addr}; " \
  99                        "else " \
 100                                "echo WARN: Cannot load the DT; " \
 101                        "fi; " \
 102                "fi;\0" \
 103        "netargs=setenv bootargs console=${console} " \
 104                "root=/dev/nfs " \
 105                "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 106        "netboot=echo Booting from net ...; " \
 107                "run netargs;  " \
 108                "if test ${ip_dyn} = yes; then " \
 109                        "setenv get_cmd dhcp; " \
 110                "else " \
 111                        "setenv get_cmd tftp; " \
 112                "fi; " \
 113                "${get_cmd} ${loadaddr} ${image}; " \
 114                "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
 115                        "bootm ${loadaddr}; " \
 116                "else " \
 117                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 118                                "booti ${loadaddr} - ${fdt_addr}; " \
 119                        "else " \
 120                                "echo WARN: Cannot load the DT; " \
 121                        "fi; " \
 122                "fi;\0"
 123
 124/* Link Definitions */
 125
 126#define CFG_SYS_INIT_RAM_ADDR   0x40000000
 127#define CFG_SYS_INIT_RAM_SIZE   0x80000
 128
 129
 130#define CFG_SYS_SDRAM_BASE              0x40000000
 131#define PHYS_SDRAM                      0x40000000
 132#define PHYS_SDRAM_SIZE                 0x80000000 /* 2GB DDR */
 133
 134/* USDHC */
 135
 136#define CFG_SYS_FSL_USDHC_NUM   2
 137#define CFG_SYS_FSL_ESDHC_ADDR  0
 138
 139#define CFG_FEC_MXC_PHYADDR             0
 140
 141/* USB Configs */
 142#define CFG_MXC_USB_PORTSC      (PORT_PTS_UTMI | PORT_PTS_PTW)
 143
 144#endif /*__IMX8MM_CL_IOT_GATE_H*/
 145