LXR uboot/board/warp/warp.c

   1/*
   2 * Copyright (C) 2014, 2015 O.S. Systems Software LTDA.
   3 * Copyright (C) 2014 Kynetics LLC.
   4 * Copyright (C) 2014 Revolution Robotics, Inc.
   5 *
   6 * Author: Otavio Salvador <otavio@ossystems.com.br>
   7 *
   8 * SPDX-License-Identifier:     GPL-2.0+
   9 */
  10
  11#include <asm/arch/clock.h>
  12#include <asm/arch/iomux.h>
  13#include <asm/arch/imx-regs.h>
  14#include <asm/arch/mx6-pins.h>
  15#include <asm/arch/sys_proto.h>
  16#include <asm/gpio.h>
  17#include <asm/imx-common/iomux-v3.h>
  18#include <asm/imx-common/mxc_i2c.h>
  19#include <asm/io.h>
  20#include <linux/sizes.h>
  21#include <common.h>
  22#include <watchdog.h>
  23#include <fsl_esdhc.h>
  24#include <i2c.h>
  25#include <mmc.h>
  26#include <usb.h>
  27#include <power/pmic.h>
  28#include <power/max77696_pmic.h>
  29
  30DECLARE_GLOBAL_DATA_PTR;
  31
  32#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
  33        PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
  34        PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
  35        PAD_CTL_LVE)
  36
  37#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
  38        PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
  39        PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
  40        PAD_CTL_LVE)
  41
  42#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |               \
  43                      PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
  44                      PAD_CTL_DSE_40ohm | PAD_CTL_HYS |         \
  45                      PAD_CTL_ODE | PAD_CTL_SRE_FAST)
  46
  47int dram_init(void)
  48{
  49        gd->ram_size = imx_ddr_size();
  50
  51        return 0;
  52}
  53
  54static void setup_iomux_uart(void)
  55{
  56        static iomux_v3_cfg_t const uart1_pads[] = {
  57                MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  58                MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
  59        };
  60
  61        imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
  62}
  63
  64static struct fsl_esdhc_cfg usdhc_cfg[1] = {
  65        {USDHC2_BASE_ADDR},
  66};
  67
  68int board_mmc_getcd(struct mmc *mmc)
  69{
  70        return 1;       /* Assume boot SD always present */
  71}
  72
  73int board_mmc_init(bd_t *bis)
  74{
  75        static iomux_v3_cfg_t const usdhc2_pads[] = {
  76                MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  77                MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  78                MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  79                MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  80                MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  81                MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  82                MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  83                MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  84                MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  85                MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  86                MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
  87        };
  88
  89        imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
  90
  91        usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
  92        return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
  93}
  94
  95int board_usb_phy_mode(int port)
  96{
  97        return USB_INIT_DEVICE;
  98}
  99
 100/* I2C1 for PMIC */
 101#define I2C_PMIC        0
 102#define PC      MUX_PAD_CTRL(I2C_PAD_CTRL)
 103struct i2c_pads_info i2c_pad_info1 = {
 104        .sda = {
 105                .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
 106                .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
 107                .gp = IMX_GPIO_NR(3, 13),
 108        },
 109        .scl = {
 110                .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
 111                .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
 112                .gp = IMX_GPIO_NR(3, 12),
 113        },
 114};
 115
 116int power_init_board(void)
 117{
 118        struct pmic *p;
 119        int ret;
 120        unsigned int reg;
 121
 122        ret = power_max77696_init(I2C_PMIC);
 123        if (ret)
 124                return ret;
 125
 126        p = pmic_get("MAX77696");
 127        if (!p)
 128                return -EINVAL;
 129
 130        ret = pmic_reg_read(p, CID, &reg);
 131        if (ret)
 132                return ret;
 133
 134        printf("PMIC:  MAX77696 detected, rev=0x%x\n", reg);
 135
 136        return pmic_probe(p);
 137}
 138
 139int board_early_init_f(void)
 140{
 141        setup_iomux_uart();
 142        return 0;
 143}
 144
 145int board_init(void)
 146{
 147        /* address of boot parameters */
 148        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 149
 150        setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 151
 152        return 0;
 153}
 154
 155int board_late_init(void)
 156{
 157#ifdef CONFIG_HW_WATCHDOG
 158        hw_watchdog_init();
 159#endif
 160
 161        return 0;
 162}
 163
 164int checkboard(void)
 165{
 166        puts("Board: WaRP Board\n");
 167
 168        return 0;
 169}
 170