LXR uboot/board/freescale/mpc8548cds/mpc8548cds.c

   1/*
   2 * Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc.
   3 *
   4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#include <common.h>
  10#include <pci.h>
  11#include <asm/processor.h>
  12#include <asm/mmu.h>
  13#include <asm/immap_85xx.h>
  14#include <asm/fsl_pci.h>
  15#include <fsl_ddr_sdram.h>
  16#include <asm/fsl_serdes.h>
  17#include <miiphy.h>
  18#include <libfdt.h>
  19#include <fdt_support.h>
  20#include <tsec.h>
  21#include <fsl_mdio.h>
  22#include <netdev.h>
  23
  24#include "../common/cadmus.h"
  25#include "../common/eeprom.h"
  26#include "../common/via.h"
  27
  28void local_bus_init(void);
  29
  30int checkboard (void)
  31{
  32        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  33        volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
  34
  35        /* PCI slot in USER bits CSR[6:7] by convention. */
  36        uint pci_slot = get_pci_slot ();
  37
  38        uint cpu_board_rev = get_cpu_board_revision ();
  39
  40        puts("Board: MPC8548CDS");
  41        printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
  42                        get_board_version(), pci_slot);
  43        printf("       Daughtercard Rev: %d.%d (0x%04x)\n",
  44                MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
  45                MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
  46        /*
  47         * Initialize local bus.
  48         */
  49        local_bus_init ();
  50
  51        /*
  52         * Hack TSEC 3 and 4 IO voltages.
  53         */
  54        gur->tsec34ioovcr = 0xe7e0;     /*  1110 0111 1110 0xxx */
  55
  56        ecm->eedr = 0xffffffff;         /* clear ecm errors */
  57        ecm->eeer = 0xffffffff;         /* enable ecm errors */
  58        return 0;
  59}
  60
  61/*
  62 * Initialize Local Bus
  63 */
  64void
  65local_bus_init(void)
  66{
  67        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  68        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
  69
  70        uint clkdiv;
  71        sys_info_t sysinfo;
  72
  73        get_sys_info(&sysinfo);
  74        clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
  75
  76        gur->lbiuiplldcr1 = 0x00078080;
  77        if (clkdiv == 16) {
  78                gur->lbiuiplldcr0 = 0x7c0f1bf0;
  79        } else if (clkdiv == 8) {
  80                gur->lbiuiplldcr0 = 0x6c0f1bf0;
  81        } else if (clkdiv == 4) {
  82                gur->lbiuiplldcr0 = 0x5c0f1bf0;
  83        }
  84
  85        lbc->lcrr |= 0x00030000;
  86
  87        asm("sync;isync;msync");
  88
  89        lbc->ltesr = 0xffffffff;        /* Clear LBC error interrupts */
  90        lbc->lteir = 0xffffffff;        /* Enable LBC error interrupts */
  91}
  92
  93/*
  94 * Initialize SDRAM memory on the Local Bus.
  95 */
  96void lbc_sdram_init(void)
  97{
  98#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
  99
 100        uint idx;
 101        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 102        uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 103        uint lsdmr_common;
 104
 105        puts("LBC SDRAM: ");
 106        print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
 107                   "\n");
 108
 109        /*
 110         * Setup SDRAM Base and Option Registers
 111         */
 112        set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
 113        set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 114        lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 115        asm("msync");
 116
 117        lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 118        lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 119        asm("msync");
 120
 121        /*
 122         * MPC8548 uses "new" 15-16 style addressing.
 123         */
 124        lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 125        lsdmr_common |= LSDMR_BSMA1516;
 126
 127        /*
 128         * Issue PRECHARGE ALL command.
 129         */
 130        lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
 131        asm("sync;msync");
 132        *sdram_addr = 0xff;
 133        ppcDcbf((unsigned long) sdram_addr);
 134        udelay(100);
 135
 136        /*
 137         * Issue 8 AUTO REFRESH commands.
 138         */
 139        for (idx = 0; idx < 8; idx++) {
 140                lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
 141                asm("sync;msync");
 142                *sdram_addr = 0xff;
 143                ppcDcbf((unsigned long) sdram_addr);
 144                udelay(100);
 145        }
 146
 147        /*
 148         * Issue 8 MODE-set command.
 149         */
 150        lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
 151        asm("sync;msync");
 152        *sdram_addr = 0xff;
 153        ppcDcbf((unsigned long) sdram_addr);
 154        udelay(100);
 155
 156        /*
 157         * Issue NORMAL OP command.
 158         */
 159        lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
 160        asm("sync;msync");
 161        *sdram_addr = 0xff;
 162        ppcDcbf((unsigned long) sdram_addr);
 163        udelay(200);    /* Overkill. Must wait > 200 bus cycles */
 164
 165#endif  /* enable SDRAM init */
 166}
 167
 168#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 169/* For some reason the Tundra PCI bridge shows up on itself as a
 170 * different device.  Work around that by refusing to configure it.
 171 */
 172void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
 173
 174static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 175        {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
 176        {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
 177        {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
 178                mpc85xx_config_via_usbide, {0,0,0}},
 179        {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
 180                mpc85xx_config_via_usb, {0,0,0}},
 181        {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
 182                mpc85xx_config_via_usb2, {0,0,0}},
 183        {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
 184                mpc85xx_config_via_power, {0,0,0}},
 185        {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
 186                mpc85xx_config_via_ac97, {0,0,0}},
 187        {},
 188};
 189
 190static struct pci_controller pci1_hose;
 191#endif  /* CONFIG_PCI */
 192
 193void pci_init_board(void)
 194{
 195        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 196        struct fsl_pci_info pci_info;
 197        u32 devdisr, pordevsr, io_sel;
 198        u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
 199        int first_free_busno = 0;
 200        char buf[32];
 201
 202        devdisr = in_be32(&gur->devdisr);
 203        pordevsr = in_be32(&gur->pordevsr);
 204        porpllsr = in_be32(&gur->porpllsr);
 205        io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 206
 207        debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 208
 209#ifdef CONFIG_PCI1
 210        pci_speed = get_clock_freq ();  /* PCI PSPEED in [4:5] */
 211        pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;        /* PORDEVSR[15] */
 212        pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
 213        pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 214
 215        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 216                SET_STD_PCI_INFO(pci_info, 1);
 217                set_next_law(pci_info.mem_phys,
 218                        law_size_bits(pci_info.mem_size), pci_info.law);
 219                set_next_law(pci_info.io_phys,
 220                        law_size_bits(pci_info.io_size), pci_info.law);
 221
 222                pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
 223                printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 224                        (pci_32) ? 32 : 64,
 225                        strmhz(buf, pci_speed),
 226                        pci_clk_sel ? "sync" : "async",
 227                        pci_agent ? "agent" : "host",
 228                        pci_arb ? "arbiter" : "external-arbiter",
 229                        pci_info.regs);
 230
 231                pci1_hose.config_table = pci_mpc85xxcds_config_table;
 232                first_free_busno = fsl_pci_init_port(&pci_info,
 233                                        &pci1_hose, first_free_busno);
 234
 235#ifdef CONFIG_PCIX_CHECK
 236                if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 237                        /* PCI-X init */
 238                        if (CONFIG_SYS_CLK_FREQ < 66000000)
 239                                printf("PCI-X will only work at 66 MHz\n");
 240
 241                        reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
 242                                | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
 243                        pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
 244                }
 245#endif
 246        } else {
 247                printf("PCI1: disabled\n");
 248        }
 249
 250        puts("\n");
 251#else
 252        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
 253#endif
 254
 255#ifdef CONFIG_PCI2
 256{
 257        uint pci2_clk_sel = porpllsr & 0x4000;  /* PORPLLSR[17] */
 258        uint pci_dual = get_pci_dual ();        /* PCI DUAL in CM_PCI[3] */
 259        if (pci_dual) {
 260                printf("PCI2: 32 bit, 66 MHz, %s\n",
 261                        pci2_clk_sel ? "sync" : "async");
 262        } else {
 263                printf("PCI2: disabled\n");
 264        }
 265}
 266#else
 267        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
 268#endif /* CONFIG_PCI2 */
 269
 270        fsl_pcie_init_board(first_free_busno);
 271}
 272
 273void configure_rgmii(void)
 274{
 275        unsigned short temp;
 276
 277        /* Change the resistors for the PHY */
 278        /* This is needed to get the RGMII working for the 1.3+
 279         * CDS cards */
 280        if (get_board_version() ==  0x13) {
 281                miiphy_write(DEFAULT_MII_NAME,
 282                                TSEC1_PHY_ADDR, 29, 18);
 283
 284                miiphy_read(DEFAULT_MII_NAME,
 285                                TSEC1_PHY_ADDR, 30, &temp);
 286
 287                temp = (temp & 0xf03f);
 288                temp |= 2 << 9;         /* 36 ohm */
 289                temp |= 2 << 6;         /* 39 ohm */
 290
 291                miiphy_write(DEFAULT_MII_NAME,
 292                                TSEC1_PHY_ADDR, 30, temp);
 293
 294                miiphy_write(DEFAULT_MII_NAME,
 295                                TSEC1_PHY_ADDR, 29, 3);
 296
 297                miiphy_write(DEFAULT_MII_NAME,
 298                                TSEC1_PHY_ADDR, 30, 0x8000);
 299        }
 300
 301        return;
 302}
 303
 304int board_eth_init(bd_t *bis)
 305{
 306#ifdef CONFIG_TSEC_ENET
 307        struct fsl_pq_mdio_info mdio_info;
 308        struct tsec_info_struct tsec_info[4];
 309        int num = 0;
 310
 311#ifdef CONFIG_TSEC1
 312        SET_STD_TSEC_INFO(tsec_info[num], 1);
 313        num++;
 314#endif
 315#ifdef CONFIG_TSEC2
 316        SET_STD_TSEC_INFO(tsec_info[num], 2);
 317        num++;
 318#endif
 319#ifdef CONFIG_TSEC3
 320        /* initialize TSEC3 only if Carrier is 1.3 or above on CDS */
 321        if (get_board_version() >= 0x13) {
 322                SET_STD_TSEC_INFO(tsec_info[num], 3);
 323                tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
 324                num++;
 325        }
 326#endif
 327#ifdef CONFIG_TSEC4
 328        /* initialize TSEC4 only if Carrier is 1.3 or above on CDS */
 329        if (get_board_version() >= 0x13) {
 330                SET_STD_TSEC_INFO(tsec_info[num], 4);
 331                tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
 332                num++;
 333        }
 334#endif
 335
 336        if (!num) {
 337                printf("No TSECs initialized\n");
 338
 339                return 0;
 340        }
 341
 342        mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
 343        mdio_info.name = DEFAULT_MII_NAME;
 344        fsl_pq_mdio_init(bis, &mdio_info);
 345
 346        tsec_eth_init(bis, tsec_info, num);
 347        configure_rgmii();
 348#endif
 349
 350        return pci_eth_init(bis);
 351}
 352
 353#if defined(CONFIG_OF_BOARD_SETUP)
 354void ft_pci_setup(void *blob, bd_t *bd)
 355{
 356        FT_FSL_PCI_SETUP;
 357}
 358#endif
 359