/*
 * Copyright 2009-2012 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <command.h>
#include <i2c.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>

#include "../common/qixis.h"
#include "../common/vsc3316_3308.h"
#include "t4qds.h"
#include "t4240qds_qixis.h"

DECLARE_GLOBAL_DATA_PTR;

static int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
                                {8, 8}, {9, 9}, {14, 14}, {15, 15} };

static int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
                                {10, 10}, {11, 11}, {12, 12}, {13, 13} };

static int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
                                {10, 11}, {11, 10}, {12, 2}, {13, 3} };

static int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
                                {8, 9}, {9, 8}, {14, 1}, {15, 0} };

int checkboard(void)
{
        char buf[64];
        u8 sw;
        struct cpu_type *cpu = gd->arch.cpu;
        unsigned int i;

        printf("Board: %sQDS, ", cpu->name);
        printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
               QIXIS_READ(id), QIXIS_READ(arch));

        sw = QIXIS_READ(brdcfg[0]);
        sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;

        if (sw < 0x8)
                printf("vBank: %d\n", sw);
        else if (sw == 0x8)
                puts("Promjet\n");
        else if (sw == 0x9)
                puts("NAND\n");
        else
                printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);

        printf("FPGA: v%d (%s), build %d",
               (int)QIXIS_READ(scver), qixis_read_tag(buf),
               (int)qixis_read_minor());
        /* the timestamp string contains "\n" at the end */
        printf(" on %s", qixis_read_time(buf));

        /*
         * Display the actual SERDES reference clocks as configured by the
         * dip switches on the board.  Note that the SWx registers could
         * technically be set to force the reference clocks to match the
         * values that the SERDES expects (or vice versa).  For now, however,
         * we just display both values and hope the user notices when they
         * don't match.
         */
        puts("SERDES Reference Clocks: ");
        sw = QIXIS_READ(brdcfg[2]);
        for (i = 0; i < MAX_SERDES; i++) {
                static const char * const freq[] = {
                        "100", "125", "156.25", "161.1328125"};
                unsigned int clock = (sw >> (6 - 2 * i)) & 3;

                printf("SERDES%u=%sMHz ", i+1, freq[clock]);
        }
        puts("\n");

        return 0;
}

int select_i2c_ch_pca9547(u8 ch)
{
        int ret;

        ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
        if (ret) {
                puts("PCA: failed to select proper channel\n");
                return ret;
        }

        return 0;
}

/*
 * read_voltage from sensor on I2C bus
 * We use average of 4 readings, waiting for 532us befor another reading
 */
#define NUM_READINGS    4       /* prefer to be power of 2 for efficiency */
#define WAIT_FOR_ADC    532     /* wait for 532 microseconds for ADC */

static inline int read_voltage(void)
{
        int i, ret, voltage_read = 0;
        u16 vol_mon;

        for (i = 0; i < NUM_READINGS; i++) {
                ret = i2c_read(I2C_VOL_MONITOR_ADDR,
                        I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
                if (ret) {
                        printf("VID: failed to read core voltage\n");
                        return ret;
                }
                if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
                        printf("VID: Core voltage sensor error\n");
                        return -1;
                }
                debug("VID: bus voltage reads 0x%04x\n", vol_mon);
                /* LSB = 4mv */
                voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
                udelay(WAIT_FOR_ADC);
        }
        /* calculate the average */
        voltage_read /= NUM_READINGS;

        return voltage_read;
}

/*
 * We need to calculate how long before the voltage starts to drop or increase
 * It returns with the loop count. Each loop takes several readings (532us)
 */
static inline int wait_for_voltage_change(int vdd_last)
{
        int timeout, vdd_current;

        vdd_current = read_voltage();
        /* wait until voltage starts to drop */
        for (timeout = 0; abs(vdd_last - vdd_current) <= 4 &&
                timeout < 100; timeout++) {
                vdd_current = read_voltage();
        }
        if (timeout >= 100) {
                printf("VID: Voltage adjustment timeout\n");
                return -1;
        }
        return timeout;
}

/*
 * argument 'wait' is the time we know the voltage difference can be measured
 * this function keeps reading the voltage until it is stable
 */
static inline int wait_for_voltage_stable(int wait)
{
        int timeout, vdd_current, vdd_last;

        vdd_last = read_voltage();
        udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
        /* wait until voltage is stable */
        vdd_current = read_voltage();
        for (timeout = 0; abs(vdd_last - vdd_current) >= 4 &&
                timeout < 100; timeout++) {
                vdd_last = vdd_current;
                udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
                vdd_current = read_voltage();
        }
        if (timeout >= 100) {
                printf("VID: Voltage adjustment timeout\n");
                return -1;
        }

        return vdd_current;
}

static inline int set_voltage(u8 vid)
{
        int wait, vdd_last;

        vdd_last = read_voltage();
        QIXIS_WRITE(brdcfg[6], vid);
        wait = wait_for_voltage_change(vdd_last);
        if (wait < 0)
                return -1;
        debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC);
        wait = wait ? wait : 1;

        vdd_last = wait_for_voltage_stable(wait);
        if (vdd_last < 0)
                return -1;
        debug("VID: Current voltage is %d mV\n", vdd_last);

        return vdd_last;
}


static int adjust_vdd(ulong vdd_override)
{
        int re_enable = disable_interrupts();
        ccsr_gur_t __iomem *gur =
                (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        u32 fusesr;
        u8 vid, vid_current;
        int vdd_target, vdd_current, vdd_last;
        int ret;
        unsigned long vdd_string_override;
        char *vdd_string;
        static const uint16_t vdd[32] = {
                0,      /* unused */
                9875,   /* 0.9875V */
                9750,
                9625,
                9500,
                9375,
                9250,
                9125,
                9000,
                8875,
                8750,
                8625,
                8500,
                8375,
                8250,
                8125,
                10000,  /* 1.0000V */
                10125,
                10250,
                10375,
                10500,
                10625,
                10750,
                10875,
                11000,
                0,      /* reserved */
        };
        struct vdd_drive {
                u8 vid;
                unsigned voltage;
        };

        ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR);
        if (ret) {
                debug("VID: I2c failed to switch channel\n");
                ret = -1;
                goto exit;
        }

        /* get the voltage ID from fuse status register */
        fusesr = in_be32(&gur->dcfg_fusesr);
        vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
                FSL_CORENET_DCFG_FUSESR_VID_MASK;
        if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
                vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
                        FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
        }
        vdd_target = vdd[vid];

        /* check override variable for overriding VDD */
        vdd_string = getenv("t4240qds_vdd_mv");
        if (vdd_override == 0 && vdd_string &&
            !strict_strtoul(vdd_string, 10, &vdd_string_override))
                vdd_override = vdd_string_override;
        if (vdd_override >= 819 && vdd_override <= 1212) {
                vdd_target = vdd_override * 10; /* convert to 1/10 mV */
                debug("VDD override is %lu\n", vdd_override);
        } else if (vdd_override != 0) {
                printf("Invalid value.\n");
        }

        if (vdd_target == 0) {
                debug("VID: VID not used\n");
                ret = 0;
                goto exit;
        } else {
                /* round up and divice by 10 to get a value in mV */
                vdd_target = DIV_ROUND_UP(vdd_target, 10);
                debug("VID: vid = %d mV\n", vdd_target);
        }

        /*
         * Check current board VID setting
         * Voltage regulator support output to 6.250mv step
         * The highes voltage allowed for this board is (vid=0x40) 1.21250V
         * the lowest is (vid=0x7f) 0.81875V
         */
        vid_current =  QIXIS_READ(brdcfg[6]);
        vdd_current = 121250 - (vid_current - 0x40) * 625;
        debug("VID: Current vid setting is (0x%x) %d mV\n",
              vid_current, vdd_current/100);

        /*
         * Read voltage monitor to check real voltage.
         * Voltage monitor LSB is 4mv.
         */
        vdd_last = read_voltage();
        if (vdd_last < 0) {
                printf("VID: Could not read voltage sensor abort VID adjustment\n");
                ret = -1;
                goto exit;
        }
        debug("VID: Core voltage is at %d mV\n", vdd_last);
        /*
         * Adjust voltage to at or 8mV above target.
         * Each step of adjustment is 6.25mV.
         * Stepping down too fast may cause over current.
         */
        while (vdd_last > 0 && vid_current < 0x80 &&
                vdd_last > (vdd_target + 8)) {
                vid_current++;
                vdd_last = set_voltage(vid_current);
        }
        /*
         * Check if we need to step up
         * This happens when board voltage switch was set too low
         */
        while (vdd_last > 0 && vid_current >= 0x40 &&
                vdd_last < vdd_target + 2) {
                vid_current--;
                vdd_last = set_voltage(vid_current);
        }
        if (vdd_last > 0)
                printf("VID: Core voltage %d mV\n", vdd_last);
        else
                ret = -1;

exit:
        if (re_enable)
                enable_interrupts();
        return ret;
}

/* Configure Crossbar switches for Front-Side SerDes Ports */
int config_frontside_crossbar_vsc3316(void)
{
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        u32 srds_prtcl_s1, srds_prtcl_s2;
        int ret;

        ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
        if (ret)
                return ret;

        srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
                        FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
        srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
        switch (srds_prtcl_s1) {
        case 37:
        case 38:
                /* swap first lane and third lane on slot1 */
                vsc3316_fsm1_tx[0][1] = 14;
                vsc3316_fsm1_tx[6][1] = 0;
                vsc3316_fsm1_rx[1][1] = 2;
                vsc3316_fsm1_rx[6][1] = 13;
        case 39:
        case 40:
        case 45:
        case 46:
        case 47:
        case 48:
                /* swap first lane and third lane on slot2 */
                vsc3316_fsm1_tx[2][1] = 8;
                vsc3316_fsm1_tx[4][1] = 6;
                vsc3316_fsm1_rx[2][1] = 10;
                vsc3316_fsm1_rx[5][1] = 5;
        default:
                ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
                if (ret)
                        return ret;
                ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
                if (ret)
                        return ret;
                break;
        }

        srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
                                FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
        srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
        switch (srds_prtcl_s2) {
        case 37:
        case 38:
                /* swap first lane and third lane on slot3 */
                vsc3316_fsm2_tx[2][1] = 11;
                vsc3316_fsm2_tx[5][1] = 4;
                vsc3316_fsm2_rx[2][1] = 9;
                vsc3316_fsm2_rx[4][1] = 7;
        case 39:
        case 40:
        case 45:
        case 46:
        case 47:
        case 48:
        case 49:
        case 50:
        case 51:
        case 52:
        case 53:
        case 54:
                /* swap first lane and third lane on slot4 */
                vsc3316_fsm2_tx[6][1] = 3;
                vsc3316_fsm2_tx[1][1] = 12;
                vsc3316_fsm2_rx[0][1] = 1;
                vsc3316_fsm2_rx[6][1] = 15;
        default:
                ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
                if (ret)
                        return ret;
                ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
                if (ret)
                        return ret;
                break;
        }

        return 0;
}

int config_backside_crossbar_mux(void)
{
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        u32 srds_prtcl_s3, srds_prtcl_s4;
        u8 brdcfg;

        srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) &
                        FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
        srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
        switch (srds_prtcl_s3) {
        case 0:
                /* SerDes3 is not enabled */
                break;
        case 1:
        case 2:
        case 9:
        case 10:
                /* SD3(0:7) => SLOT5(0:7) */
                brdcfg = QIXIS_READ(brdcfg[12]);
                brdcfg &= ~BRDCFG12_SD3MX_MASK;
                brdcfg |= BRDCFG12_SD3MX_SLOT5;
                QIXIS_WRITE(brdcfg[12], brdcfg);
                break;
        case 3:
        case 4:
        case 5:
        case 6:
        case 7:
        case 8:
        case 11:
        case 12:
        case 13:
        case 14:
        case 15:
        case 16:
        case 17:
        case 18:
        case 19:
        case 20:
                /* SD3(4:7) => SLOT6(0:3) */
                brdcfg = QIXIS_READ(brdcfg[12]);
                brdcfg &= ~BRDCFG12_SD3MX_MASK;
                brdcfg |= BRDCFG12_SD3MX_SLOT6;
                QIXIS_WRITE(brdcfg[12], brdcfg);
                break;
        default:
                printf("WARNING: unsupported for SerDes3 Protocol %d\n",
                       srds_prtcl_s3);
                return -1;
        }

        srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
                        FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
        srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
        switch (srds_prtcl_s4) {
        case 0:
                /* SerDes4 is not enabled */
                break;
        case 1:
        case 2:
                /* 10b, SD4(0:7) => SLOT7(0:7) */
                brdcfg = QIXIS_READ(brdcfg[12]);
                brdcfg &= ~BRDCFG12_SD4MX_MASK;
                brdcfg |= BRDCFG12_SD4MX_SLOT7;
                QIXIS_WRITE(brdcfg[12], brdcfg);
                break;
        case 3:
        case 4:
        case 5:
        case 6:
        case 7:
        case 8:
                /* x1b, SD4(4:7) => SLOT8(0:3) */
                brdcfg = QIXIS_READ(brdcfg[12]);
                brdcfg &= ~BRDCFG12_SD4MX_MASK;
                brdcfg |= BRDCFG12_SD4MX_SLOT8;
                QIXIS_WRITE(brdcfg[12], brdcfg);
                break;
        case 9:
        case 10:
        case 11:
        case 12:
        case 13:
        case 14:
        case 15:
        case 16:
        case 18:
                /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */
                brdcfg = QIXIS_READ(brdcfg[12]);
                brdcfg &= ~BRDCFG12_SD4MX_MASK;
                brdcfg |= BRDCFG12_SD4MX_AURO_SATA;
                QIXIS_WRITE(brdcfg[12], brdcfg);
                break;
        default:
                printf("WARNING: unsupported for SerDes4 Protocol %d\n",
                       srds_prtcl_s4);
                return -1;
        }

        return 0;
}

int board_early_init_r(void)
{
        const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
        int flash_esel = find_tlb_idx((void *)flashbase, 1);

        /*
         * Remap Boot flash + PROMJET region to caching-inhibited
         * so that flash can be erased properly.
         */

        /* Flush d-cache and invalidate i-cache of any FLASH data */
        flush_dcache();
        invalidate_icache();

        if (flash_esel == -1) {
                /* very unlikely unless something is messed up */
                puts("Error: Could not find TLB for FLASH BASE\n");
                flash_esel = 2; /* give our best effort to continue */
        } else {
                /* invalidate existing TLB entry for flash + promjet */
                disable_tlb(flash_esel);
        }

        set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
                MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                0, flash_esel, BOOKE_PAGESZ_256M, 1);

        /* Disable remote I2C connection to qixis fpga */
        QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);

        /*
         * Adjust core voltage according to voltage ID
         * This function changes I2C mux to channel 2.
         */
        if (adjust_vdd(0))
                printf("Warning: Adjusting core voltage failed.\n");

        /* Configure board SERDES ports crossbar */
        config_frontside_crossbar_vsc3316();
        config_backside_crossbar_mux();
        select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);

        return 0;
}

unsigned long get_board_sys_clk(void)
{
        u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
        /* use accurate clock measurement */
        int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
        int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
        u32 val;

        val =  freq * base;
        if (val) {
                debug("SYS Clock measurement is: %d\n", val);
                return val;
        } else {
                printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n");
        }
#endif

        switch (sysclk_conf & 0x0F) {
        case QIXIS_SYSCLK_83:
                return 83333333;
        case QIXIS_SYSCLK_100:
                return 100000000;
        case QIXIS_SYSCLK_125:
                return 125000000;
        case QIXIS_SYSCLK_133:
                return 133333333;
        case QIXIS_SYSCLK_150:
                return 150000000;
        case QIXIS_SYSCLK_160:
                return 160000000;
        case QIXIS_SYSCLK_166:
                return 166666666;
        }
        return 66666666;
}

unsigned long get_board_ddr_clk(void)
{
        u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
        /* use accurate clock measurement */
        int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
        int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
        u32 val;

        val =  freq * base;
        if (val) {
                debug("DDR Clock measurement is: %d\n", val);
                return val;
        } else {
                printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n");
        }
#endif

        switch ((ddrclk_conf & 0x30) >> 4) {
        case QIXIS_DDRCLK_100:
                return 100000000;
        case QIXIS_DDRCLK_125:
                return 125000000;
        case QIXIS_DDRCLK_133:
                return 133333333;
        }
        return 66666666;
}

int misc_init_r(void)
{
        u8 sw;
        void *srds_base = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
        serdes_corenet_t *srds_regs;
        u32 actual[MAX_SERDES];
        u32 pllcr0, expected;
        unsigned int i;

        sw = QIXIS_READ(brdcfg[2]);
        for (i = 0; i < MAX_SERDES; i++) {
                unsigned int clock = (sw >> (6 - 2 * i)) & 3;
                switch (clock) {
                case 0:
                        actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
                        break;
                case 1:
                        actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
                        break;
                case 2:
                        actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
                        break;
                case 3:
                        actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13;
                        break;
                }
        }

        for (i = 0; i < MAX_SERDES; i++) {
                srds_regs = srds_base + i * 0x1000;
                pllcr0 = srds_regs->bank[0].pllcr0;
                expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
                if (expected != actual[i]) {
                        printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n",
                               i + 1, serdes_clock_to_string(expected),
                               serdes_clock_to_string(actual[i]));
                }
        }

        return 0;
}

int ft_board_setup(void *blob, bd_t *bd)
{
        phys_addr_t base;
        phys_size_t size;

        ft_cpu_setup(blob, bd);

        base = getenv_bootm_low();
        size = getenv_bootm_size();

        fdt_fixup_memory(blob, (u64)base, (u64)size);

#ifdef CONFIG_PCI
        pci_of_setup(blob, bd);
#endif

        fdt_fixup_liodn(blob);
        fsl_fdt_fixup_dr_usb(blob, bd);

#ifdef CONFIG_SYS_DPAA_FMAN
        fdt_fixup_fman_ethernet(blob);
        fdt_fixup_board_enet(blob);
#endif

        return 0;
}

/*
 * This function is called by bdinfo to print detail board information.
 * As an exmaple for future board, we organize the messages into
 * several sections. If applicable, the message is in the format of
 * <name>      = <value>
 * It should aligned with normal output of bdinfo command.
 *
 * Voltage: Core, DDR and another configurable voltages
 * Clock  : Critical clocks which are not printed already
 * RCW    : RCW source if not printed already
 * Misc   : Other important information not in above catagories
 */
void board_detail(void)
{
        int i;
        u8 brdcfg[16], dutcfg[16], rst_ctl;
        int vdd, rcwsrc;
        static const char * const clk[] = {"66.67", "100", "125", "133.33"};

        for (i = 0; i < 16; i++) {
                brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
                dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
        }

        /* Voltage secion */
        if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
                vdd = read_voltage();
                if (vdd > 0)
                        printf("Core voltage= %d mV\n", vdd);
                select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
        }

        printf("XVDD        = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);

        /* clock section */
        printf("SYSCLK      = %s MHz\nDDRCLK      = %s MHz\n",
               clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);

        /* RCW section */
        rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
        puts("RCW source  = ");
        switch (rcwsrc) {
        case 0x017:
        case 0x01f:
                puts("8-bit NOR\n");
                break;
        case 0x027:
        case 0x02F:
                puts("16-bit NOR\n");
                break;
        case 0x040:
                puts("SDHC/eMMC\n");
                break;
        case 0x044:
                puts("SPI 16-bit addressing\n");
                break;
        case 0x045:
                puts("SPI 24-bit addressing\n");
                break;
        case 0x048:
                puts("I2C normal addressing\n");
                break;
        case 0x049:
                puts("I2C extended addressing\n");
                break;
        case 0x108:
        case 0x109:
        case 0x10a:
        case 0x10b:
                puts("8-bit NAND, 2KB\n");
                break;
        default:
                if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
                        puts("Hard-coded RCW\n");
                else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
                        puts("8-bit NAND, 4KB\n");
                else
                        puts("unknown\n");
                break;
        }

        /* Misc section */
        rst_ctl = QIXIS_READ(rst_ctl);
        puts("HRESET_REQ  = ");
        switch (rst_ctl & 0x30) {
        case 0x00:
                puts("Ignored\n");
                break;
        case 0x10:
                puts("Assert HRESET\n");
                break;
        case 0x30:
                puts("Reset system\n");
                break;
        default:
                puts("N/A\n");
                break;
        }
}

/*
 * Reverse engineering switch settings.
 * Some bits cannot be figured out. They will be displayed as
 * underscore in binary format. mask[] has those bits.
 * Some bits are calculated differently than the actual switches
 * if booting with overriding by FPGA.
 */
void qixis_dump_switch(void)
{
        int i;
        u8 sw[9];

        /*
         * Any bit with 1 means that bit cannot be reverse engineered.
         * It will be displayed as _ in binary format.
         */
        static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f};
        char buf[10];
        u8 brdcfg[16], dutcfg[16];

        for (i = 0; i < 16; i++) {
                brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
                dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
        }

        sw[0] = dutcfg[0];
        sw[1] = (dutcfg[1] << 0x07)             |
                ((dutcfg[12] & 0xC0) >> 1)      |
                ((dutcfg[11] & 0xE0) >> 3)      |
                ((dutcfg[6] & 0x80) >> 6)       |
                ((dutcfg[1] & 0x80) >> 7);
        sw[2] = ((brdcfg[1] & 0x0f) << 4)       |
                ((brdcfg[1] & 0x30) >> 2)       |
                ((brdcfg[1] & 0x40) >> 5)       |
                ((brdcfg[1] & 0x80) >> 7);
        sw[3] = brdcfg[2];
        sw[4] = ((dutcfg[2] & 0x01) << 7)       |
                ((dutcfg[2] & 0x06) << 4)       |
                ((~QIXIS_READ(present)) & 0x10) |
                ((brdcfg[3] & 0x80) >> 4)       |
                ((brdcfg[3] & 0x01) << 2)       |
                ((brdcfg[6] == 0x62) ? 3 :
                ((brdcfg[6] == 0x5a) ? 2 :
                ((brdcfg[6] == 0x5e) ? 1 : 0)));
        sw[5] = ((brdcfg[0] & 0x0f) << 4)       |
                ((QIXIS_READ(rst_ctl) & 0x30) >> 2) |
                ((brdcfg[0] & 0x40) >> 5);
        sw[6] = (brdcfg[11] & 0x20)             |
                ((brdcfg[5] & 0x02) << 3);
        sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) |
                ((brdcfg[5] & 0x10) << 2);
        sw[8] = ((brdcfg[12] & 0x08) << 4)      |
                ((brdcfg[12] & 0x03) << 5);

        puts("DIP switch (reverse-engineering)\n");
        for (i = 0; i < 9; i++) {
                printf("SW%d         = 0b%s (0x%02x)\n",
                       i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
        }
}

static int do_vdd_adjust(cmd_tbl_t *cmdtp,
                         int flag, int argc,
                         char * const argv[])
{
        ulong override;

        if (argc < 2)
                return CMD_RET_USAGE;
        if (!strict_strtoul(argv[1], 10, &override))
                adjust_vdd(override);   /* the value is checked by callee */
        else
                return CMD_RET_USAGE;

        return 0;
}

U_BOOT_CMD(
        vdd_override, 2, 0, do_vdd_adjust,
        "Override VDD",
        "- override with the voltage specified in mV, eg. 1050"
);