LXR uboot/include/configs/o3dnt.h

   1/*
   2 * (C) Copyright 2012
   3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8/*
   9 * Valid values for CONFIG_SYS_TEXT_BASE are:
  10 * 0xFC000000   boot low boot high (standard configuration)
  11 * 0x00100000   boot from RAM (for testing only)
  12 */
  13#ifndef CONFIG_SYS_TEXT_BASE
  14#define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
  15#endif
  16
  17/* Board specific flash config */
  18#define CONFIG_SYS_FLASH_BASE           0xfc000000
  19#define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
  20/* max number of sectors on one chip */
  21#define CONFIG_SYS_MAX_FLASH_SECT       512
  22
  23/*
  24 * Include common defines for all ifm boards
  25 */
  26#include "o2dnt-common.h"
  27
  28/* Additional commands */
  29#define CONFIG_CMD_BSP
  30#define CONFIG_CMD_REGINFO
  31
  32/*
  33 * GPIO configuration:
  34 * no CAN + no PCI
  35 */
  36#define CONFIG_SYS_GPS_PORT_CONFIG      0x0000A000
  37
  38/* Other board specific configs */
  39#define CONFIG_SYS_BOOTCS_CFG           0x00057d01
  40#define CONFIG_SYS_RESET_ADDRESS        0xfc000000
  41
  42#define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  43#define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM */
  44
  45#define CONFIG_BOARD_NAME               "o3dnt"
  46#define CONFIG_BOARD_BOOTCMD            "run flash_self"
  47#define CONFIG_BOARD_MEM_LIMIT          __stringify(62)
  48#define BOARD_POST_CRC32_END            __stringify(0x01000000)
  49
  50#define CONFIG_EXTRA_ENV_SETTINGS                                       \
  51        CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  52        CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  53        CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  54        "linbot=fc060000\0"                                             \
  55        "lintop=fc15ffff\0"                                             \
  56        "rambot=fc160000\0"                                             \
  57        "ramtop=fc55ffff\0"                                             \
  58        "jffbot=fc560000\0"                                             \
  59        "jfftop=fce5ffff\0"                                             \
  60        "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
  61        "ubotop=fc03ffff\0"                                             \
  62        "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"    \
  63        "calbot=fce60000\0"                                             \
  64        "caltop=fcffffff\0"                                             \
  65        "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"     \
  66                "cp.b ${fileaddr} ${calbot} ${filesize}\0"              \
  67        "kernel_addr=0xfc060000\0"                                      \
  68        "ramdisk_addr=0xfc160000\0"                                     \
  69        "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};"           \
  70                "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
  71