LXR uboot/include/configs/omap5

   1/*
   2 * (C) Copyright 2013
   3 * Texas Instruments Incorporated.
   4 * Sricharan R    <r.sricharan@ti.com>
   5 *
   6 * Configuration settings for the TI EVM5430 board.
   7 * See ti_omap5_common.h for omap5 common settings.
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef __CONFIG_OMAP5_EVM_H
  13#define __CONFIG_OMAP5_EVM_H
  14
  15#include <environment/ti/dfu.h>
  16
  17#ifndef CONFIG_SPL_BUILD
  18/* Define the default GPT table for eMMC */
  19#define PARTS_DEFAULT \
  20        "uuid_disk=${uuid_gpt_disk};" \
  21        "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
  22#endif
  23
  24#define DFUARGS \
  25        "dfu_bufsiz=0x10000\0" \
  26        DFU_ALT_INFO_MMC \
  27        DFU_ALT_INFO_EMMC \
  28        DFU_ALT_INFO_RAM
  29
  30#include <configs/ti_omap5_common.h>
  31
  32#define CONFIG_CONS_INDEX               3
  33#define CONFIG_SYS_NS16550_COM3         UART3_BASE
  34#define CONFIG_BAUDRATE                 115200
  35
  36#define CONFIG_MISC_INIT_R
  37/* MMC ENV related defines */
  38#define CONFIG_ENV_IS_IN_MMC
  39#define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  40#define CONFIG_ENV_SIZE                 (128 << 10)
  41#define CONFIG_ENV_OFFSET               0xE0000
  42#define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  43#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  44
  45/* Enhance our eMMC support / experience. */
  46#define CONFIG_CMD_GPT
  47#define CONFIG_EFI_PARTITION
  48#define CONFIG_HSMMC2_8BIT
  49#define CONFIG_SUPPORT_EMMC_BOOT
  50
  51/* Required support for the TCA642X GPIO we have on the uEVM */
  52#define CONFIG_TCA642X
  53#define CONFIG_CMD_TCA642X
  54#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
  55#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
  56
  57/* USB UHH support options */
  58#define CONFIG_USB_EHCI
  59#define CONFIG_USB_EHCI_OMAP
  60#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
  61#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  62
  63#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
  64#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
  65
  66/* Enabled commands */
  67
  68/* USB Networking options */
  69#define CONFIG_USB_HOST_ETHER
  70#define CONFIG_USB_ETHER_SMSC95XX
  71
  72#define CONSOLEDEV              "ttyO2"
  73
  74/* Max time to hold reset on this board, see doc/README.omap-reset-time */
  75#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC        16296
  76
  77#define CONFIG_SCSI
  78#define CONFIG_LIBATA
  79#define CONFIG_SCSI_AHCI
  80#define CONFIG_SCSI_AHCI_PLAT
  81#define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
  82#define CONFIG_SYS_SCSI_MAX_LUN         1
  83#define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  84                                                CONFIG_SYS_SCSI_MAX_LUN)
  85
  86#endif /* __CONFIG_OMAP5_EVM_H */
  87