1/* 2 * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> 3 * 4 * (C) Copyright 2000 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10#include <common.h> 11 12#include <asm/timer.h> 13#include <asm/immap.h> 14#include <watchdog.h> 15 16DECLARE_GLOBAL_DATA_PTR; 17 18static volatile ulong timestamp = 0; 19 20#ifndef CONFIG_SYS_WATCHDOG_FREQ 21#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 2) 22#endif 23 24#if defined(CONFIG_MCFTMR) 25#ifndef CONFIG_SYS_UDELAY_BASE 26# error "uDelay base not defined!" 27#endif 28 29#if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK) 30# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!" 31#endif 32extern void dtimer_intr_setup(void); 33 34void __udelay(unsigned long usec) 35{ 36 volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_UDELAY_BASE); 37 uint start, now, tmp; 38 39 while (usec > 0) { 40 if (usec > 65000) 41 tmp = 65000; 42 else 43 tmp = usec; 44 usec = usec - tmp; 45 46 /* Set up TIMER 3 as timebase clock */ 47 timerp->tmr = DTIM_DTMR_RST_RST; 48 timerp->tcn = 0; 49 /* set period to 1 us */ 50 timerp->tmr = 51 CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | 52 DTIM_DTMR_RST_EN; 53 54 start = now = timerp->tcn; 55 while (now < start + tmp) 56 now = timerp->tcn; 57 } 58} 59 60void dtimer_interrupt(void *not_used) 61{ 62 volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE); 63 64 /* check for timer interrupt asserted */ 65 if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) { 66 timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); 67 timestamp++; 68 69 #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG) 70 if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0) { 71 WATCHDOG_RESET (); 72 } 73 #endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */ 74 return; 75 } 76} 77 78int timer_init(void) 79{ 80 volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE); 81 82 timestamp = 0; 83 84 timerp->tcn = 0; 85 timerp->trr = 0; 86 87 /* Set up TIMER 4 as clock */ 88 timerp->tmr = DTIM_DTMR_RST_RST; 89 90 /* initialize and enable timer interrupt */ 91 irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0); 92 93 timerp->tcn = 0; 94 timerp->trr = 1000; /* Interrupt every ms */ 95 96 dtimer_intr_setup(); 97 98 /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ 99 timerp->tmr = CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | 100 DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN; 101 102 return 0; 103} 104 105ulong get_timer(ulong base) 106{ 107 return (timestamp - base); 108} 109 110#endif /* CONFIG_MCFTMR */ 111 112#if defined(CONFIG_MCFPIT) 113#if !defined(CONFIG_SYS_PIT_BASE) 114# error "CONFIG_SYS_PIT_BASE not defined!" 115#endif 116 117static unsigned short lastinc; 118 119void __udelay(unsigned long usec) 120{ 121 volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_UDELAY_BASE); 122 uint tmp; 123 124 while (usec > 0) { 125 if (usec > 65000) 126 tmp = 65000; 127 else 128 tmp = usec; 129 usec = usec - tmp; 130 131 /* Set up TIMER 3 as timebase clock */ 132 timerp->pcsr = PIT_PCSR_OVW; 133 timerp->pmr = 0; 134 /* set period to 1 us */ 135 timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN; 136 137 timerp->pmr = tmp; 138 while (timerp->pcntr > 0) ; 139 } 140} 141 142void timer_init(void) 143{ 144 volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE); 145 timestamp = 0; 146 147 /* Set up TIMER 4 as poll clock */ 148 timerp->pcsr = PIT_PCSR_OVW; 149 timerp->pmr = lastinc = 0; 150 timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN; 151 152 return 0; 153} 154 155ulong get_timer(ulong base) 156{ 157 unsigned short now, diff; 158 volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE); 159 160 now = timerp->pcntr; 161 diff = -(now - lastinc); 162 163 timestamp += diff; 164 lastinc = now; 165 return timestamp - base; 166} 167 168void wait_ticks(unsigned long ticks) 169{ 170 u32 start = get_timer(0); 171 while (get_timer(start) < ticks) ; 172} 173#endif /* CONFIG_MCFPIT */ 174 175/* 176 * This function is derived from PowerPC code (read timebase as long long). 177 * On M68K it just returns the timer value. 178 */ 179unsigned long long get_ticks(void) 180{ 181 return get_timer(0); 182} 183 184unsigned long usec2ticks(unsigned long usec) 185{ 186 return get_timer(usec); 187} 188 189/* 190 * This function is derived from PowerPC code (timebase clock frequency). 191 * On M68K it returns the number of timer ticks per second. 192 */ 193ulong get_tbclk(void) 194{ 195 return CONFIG_SYS_HZ; 196} 197