1/* 2 * Configuration for Versatile Express. Parts were derived from other ARM 3 * configurations. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8#ifndef __VEXPRESS_AEMV8A_H 9#define __VEXPRESS_AEMV8A_H 10 11#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP 12#ifndef CONFIG_SEMIHOSTING 13#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING 14#endif 15#define CONFIG_ARMV8_SWITCH_TO_EL1 16#endif 17 18#define CONFIG_REMAKE_ELF 19 20#define CONFIG_SUPPORT_RAW_INITRD 21 22/* Link Definitions */ 23#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ 24 defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM) 25/* ATF loads u-boot here for BASE_FVP model */ 26#define CONFIG_SYS_TEXT_BASE 0x88000000 27#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) 28#elif CONFIG_TARGET_VEXPRESS64_JUNO 29#define CONFIG_SYS_TEXT_BASE 0xe0000000 30#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 31#endif 32 33#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 34 35/* CS register bases for the original memory map. */ 36#define V2M_PA_CS0 0x00000000 37#define V2M_PA_CS1 0x14000000 38#define V2M_PA_CS2 0x18000000 39#define V2M_PA_CS3 0x1c000000 40#define V2M_PA_CS4 0x0c000000 41#define V2M_PA_CS5 0x10000000 42 43#define V2M_PERIPH_OFFSET(x) (x << 16) 44#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) 45#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) 46#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) 47 48#define V2M_BASE 0x80000000 49 50/* Common peripherals relative to CS7. */ 51#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) 52#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) 53#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) 54#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) 55 56#ifdef CONFIG_TARGET_VEXPRESS64_JUNO 57#define V2M_UART0 0x7ff80000 58#define V2M_UART1 0x7ff70000 59#else /* Not Juno */ 60#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) 61#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) 62#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) 63#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) 64#endif 65 66#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) 67 68#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17)) 69#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18)) 70 71#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22)) 72#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23)) 73 74#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26)) 75 76#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31)) 77 78/* System register offsets. */ 79#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) 80#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) 81#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) 82 83/* Generic Timer Definitions */ 84#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ 85 86/* Generic Interrupt Controller Definitions */ 87#ifdef CONFIG_GICV3 88#define GICD_BASE (0x2f000000) 89#define GICR_BASE (0x2f100000) 90#else 91 92#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ 93 defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM) 94#define GICD_BASE (0x2f000000) 95#define GICC_BASE (0x2c000000) 96#elif CONFIG_TARGET_VEXPRESS64_JUNO 97#define GICD_BASE (0x2C010000) 98#define GICC_BASE (0x2C02f000) 99#endif 100#endif /* !CONFIG_GICV3 */ 101 102/* Size of malloc() pool */ 103#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) 104 105#ifndef CONFIG_TARGET_VEXPRESS64_JUNO 106/* The Vexpress64 simulators use SMSC91C111 */ 107#define CONFIG_SMC91111 1 108#define CONFIG_SMC91111_BASE (0x01A000000) 109#endif 110 111/* PL011 Serial Configuration */ 112#define CONFIG_CONS_INDEX 0 113#define CONFIG_PL01X_SERIAL 114#define CONFIG_PL011_SERIAL 115#ifdef CONFIG_TARGET_VEXPRESS64_JUNO 116#define CONFIG_PL011_CLOCK 7273800 117#else 118#define CONFIG_PL011_CLOCK 24000000 119#endif 120 121/*#define CONFIG_MENU_SHOW*/ 122 123/* BOOTP options */ 124#define CONFIG_BOOTP_BOOTFILESIZE 125#define CONFIG_BOOTP_BOOTPATH 126#define CONFIG_BOOTP_GATEWAY 127#define CONFIG_BOOTP_HOSTNAME 128#define CONFIG_BOOTP_PXE 129 130/* Miscellaneous configurable options */ 131#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) 132 133/* Physical Memory Map */ 134#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ 135/* Top 16MB reserved for secure world use */ 136#define DRAM_SEC_SIZE 0x01000000 137#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE 138#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 139 140#ifdef CONFIG_TARGET_VEXPRESS64_JUNO 141#define CONFIG_NR_DRAM_BANKS 2 142#define PHYS_SDRAM_2 (0x880000000) 143#define PHYS_SDRAM_2_SIZE 0x180000000 144#else 145#define CONFIG_NR_DRAM_BANKS 1 146#endif 147 148/* Enable memtest */ 149#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 150#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) 151 152/* Initial environment variables */ 153#ifdef CONFIG_TARGET_VEXPRESS64_JUNO 154/* 155 * Defines where the kernel and FDT exist in NOR flash and where it will 156 * be copied into DRAM 157 */ 158#define CONFIG_EXTRA_ENV_SETTINGS \ 159 "kernel_name=norkern\0" \ 160 "kernel_alt_name=Image\0" \ 161 "kernel_addr=0x80080000\0" \ 162 "initrd_name=ramdisk.img\0" \ 163 "initrd_addr=0x84000000\0" \ 164 "fdtfile=board.dtb\0" \ 165 "fdt_alt_name=juno\0" \ 166 "fdt_addr=0x83000000\0" \ 167 "fdt_high=0xffffffffffffffff\0" \ 168 "initrd_high=0xffffffffffffffff\0" \ 169 170/* Copy the kernel and FDT to DRAM memory and boot */ 171#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \ 172 "if test $? -eq 1; then "\ 173 " echo Loading ${kernel_alt_name} instead of "\ 174 "${kernel_name}; "\ 175 " afs load ${kernel_alt_name} ${kernel_addr};"\ 176 "fi ; "\ 177 "afs load ${fdtfile} ${fdt_addr} ; " \ 178 "if test $? -eq 1; then "\ 179 " echo Loading ${fdt_alt_name} instead of "\ 180 "${fdtfile}; "\ 181 " afs load ${fdt_alt_name} ${fdt_addr}; "\ 182 "fi ; "\ 183 "fdt addr ${fdt_addr}; fdt resize; " \ 184 "if afs load ${initrd_name} ${initrd_addr} ; "\ 185 "then "\ 186 " setenv initrd_param ${initrd_addr}; "\ 187 " else setenv initrd_param -; "\ 188 "fi ; " \ 189 "booti ${kernel_addr} ${initrd_param} ${fdt_addr}" 190 191 192#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP 193#define CONFIG_EXTRA_ENV_SETTINGS \ 194 "kernel_name=Image\0" \ 195 "kernel_addr=0x80080000\0" \ 196 "initrd_name=ramdisk.img\0" \ 197 "initrd_addr=0x88000000\0" \ 198 "fdtfile=devtree.dtb\0" \ 199 "fdt_addr=0x83000000\0" \ 200 "fdt_high=0xffffffffffffffff\0" \ 201 "initrd_high=0xffffffffffffffff\0" 202 203#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ 204 "smhload ${fdtfile} ${fdt_addr}; " \ 205 "smhload ${initrd_name} ${initrd_addr} "\ 206 "initrd_end; " \ 207 "fdt addr ${fdt_addr}; fdt resize; " \ 208 "fdt chosen ${initrd_addr} ${initrd_end}; " \ 209 "booti $kernel_addr - $fdt_addr" 210 211 212#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM 213#define CONFIG_EXTRA_ENV_SETTINGS \ 214 "kernel_addr=0x80080000\0" \ 215 "initrd_addr=0x84000000\0" \ 216 "fdt_addr=0x83000000\0" \ 217 "fdt_high=0xffffffffffffffff\0" \ 218 "initrd_high=0xffffffffffffffff\0" 219 220#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr" 221 222 223#endif 224 225/* Monitor Command Prompt */ 226#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 227#define CONFIG_SYS_LONGHELP 228#define CONFIG_CMDLINE_EDITING 229#define CONFIG_SYS_MAXARGS 64 /* max command args */ 230 231#ifdef CONFIG_TARGET_VEXPRESS64_JUNO 232#define CONFIG_SYS_FLASH_BASE 0x08000000 233/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */ 234#define CONFIG_SYS_MAX_FLASH_SECT 259 235/* Store environment at top of flash in the same location as blank.img */ 236/* in the Juno firmware. */ 237#define CONFIG_ENV_ADDR 0x0BFC0000 238#define CONFIG_ENV_SECT_SIZE 0x00010000 239#else 240#define CONFIG_SYS_FLASH_BASE 0x0C000000 241/* 256 x 256KiB sectors */ 242#define CONFIG_SYS_MAX_FLASH_SECT 256 243/* Store environment at top of flash */ 244#define CONFIG_ENV_ADDR 0x0FFC0000 245#define CONFIG_ENV_SECT_SIZE 0x00040000 246#endif 247 248#define CONFIG_SYS_FLASH_CFI 1 249#define CONFIG_FLASH_CFI_DRIVER 1 250#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT 251#define CONFIG_SYS_MAX_FLASH_BANKS 1 252 253#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ 254#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ 255#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ 256#define FLASH_MAX_SECTOR_SIZE 0x00040000 257#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 258 259#endif /* __VEXPRESS_AEMV8A_H */ 260