// SPDX-License-Identifier: GPL-2.0+
/*
 * Novena board support
 *
 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
 */

#include <common.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <asm/mach-imx/video.h>
#include <environment.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
#include <ipu_pixfmt.h>
#include <linux/fb.h>
#include <linux/input.h>
#include <malloc.h>
#include <micrel.h>
#include <miiphy.h>
#include <mmc.h>
#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <stdio_dev.h>

#include "novena.h"

DECLARE_GLOBAL_DATA_PTR;

/*
 * GPIO button
 */
#ifdef CONFIG_KEYBOARD
static struct input_config button_input;

static int novena_gpio_button_read_keys(struct input_config *input)
{
        int key = KEY_ENTER;
        if (gpio_get_value(NOVENA_BUTTON_GPIO))
                return 0;
        input_send_keycodes(&button_input, &key, 1);
        return 1;
}

static int novena_gpio_button_getc(struct stdio_dev *dev)
{
        return input_getc(&button_input);
}

static int novena_gpio_button_tstc(struct stdio_dev *dev)
{
        return input_tstc(&button_input);
}

static int novena_gpio_button_init(struct stdio_dev *dev)
{
        gpio_direction_input(NOVENA_BUTTON_GPIO);
        input_set_delays(&button_input, 250, 250);
        return 0;
}

int drv_keyboard_init(void)
{
        int error;
        struct stdio_dev dev = {
                .name   = "button",
                .flags  = DEV_FLAGS_INPUT,
                .start  = novena_gpio_button_init,
                .getc   = novena_gpio_button_getc,
                .tstc   = novena_gpio_button_tstc,
        };

        error = input_init(&button_input, 0);
        if (error) {
                debug("%s: Cannot set up input\n", __func__);
                return -1;
        }
        input_add_tables(&button_input, false);
        button_input.read_keys = novena_gpio_button_read_keys;

        error = input_stdio_register(&dev);
        if (error)
                return error;

        return 0;
}
#endif

/*
 * SDHC
 */
#ifdef CONFIG_FSL_ESDHC
static struct fsl_esdhc_cfg usdhc_cfg[] = {
        { USDHC3_BASE_ADDR, 0, 4 },     /* Micro SD */
        { USDHC2_BASE_ADDR, 0, 4 },     /* Big SD */
};

int board_mmc_getcd(struct mmc *mmc)
{
        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

        /* There is no CD for a microSD card, assume always present. */
        if (cfg->esdhc_base == USDHC3_BASE_ADDR)
                return 1;
        else
                return !gpio_get_value(NOVENA_SD_CD);
}

int board_mmc_getwp(struct mmc *mmc)
{
        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

        /* There is no WP for a microSD card, assume always read-write. */
        if (cfg->esdhc_base == USDHC3_BASE_ADDR)
                return 0;
        else
                return gpio_get_value(NOVENA_SD_WP);
}


int board_mmc_init(bd_t *bis)
{
        s32 status = 0;
        int index;

        usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
        usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

        /* Big SD write-protect and card-detect */
        gpio_direction_input(NOVENA_SD_WP);
        gpio_direction_input(NOVENA_SD_CD);

        for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) {
                status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
                if (status)
                        return status;
        }

        return status;
}
#endif

int board_early_init_f(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
        setup_display_clock();
#endif

        return 0;
}

int board_init(void)
{
        /* address of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

#ifdef CONFIG_SATA
        setup_sata();
#endif

        return 0;
}

int board_late_init(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
        setup_display_lvds();
#endif
        return 0;
}

int checkboard(void)
{
        puts("Board: Novena 4x\n");
        return 0;
}

int dram_init(void)
{
        gd->ram_size = imx_ddr_size();
        return 0;
}

/* setup board specific PMIC */
int power_init_board(void)
{
        struct pmic *p;
        u32 reg;
        int ret;

        power_pfuze100_init(1);
        p = pmic_get("PFUZE100");
        if (!p)
                return -EINVAL;

        ret = pmic_probe(p);
        if (ret)
                return ret;

        pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
        printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);

        /* Set SWBST to 5.0V and enable (for USB) */
        pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
        reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
        reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
        pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);

        return 0;
}

/* EEPROM configuration data */
struct novena_eeprom_data {
        uint8_t         signature[6];
        uint8_t         version;
        uint8_t         reserved;
        uint32_t        serial;
        uint8_t         mac[6];
        uint16_t        features;
};

int misc_init_r(void)
{
        struct novena_eeprom_data data;
        uchar *datap = (uchar *)&data;
        const char *signature = "Novena";
        int ret;

        /* If 'ethaddr' is already set, do nothing. */
        if (env_get("ethaddr"))
                return 0;

        /* EEPROM is at bus 2. */
        ret = i2c_set_bus_num(2);
        if (ret) {
                puts("Cannot select EEPROM I2C bus.\n");
                return 0;
        }

        /* EEPROM is at address 0x56. */
        ret = eeprom_read(0x56, 0, datap, sizeof(data));
        if (ret) {
                puts("Cannot read I2C EEPROM.\n");
                return 0;
        }

        /* Check EEPROM signature. */
        if (memcmp(data.signature, signature, 6)) {
                puts("Invalid I2C EEPROM signature.\n");
                return 0;
        }

        /* Set ethernet address from EEPROM. */
        eth_env_set_enetaddr("ethaddr", data.mac);

        return ret;
}